Overpower

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 6750 XT lands at rank 838 out of 1744 tested combos in Overpower. That places it just below the halfway point of the database, a solidly mid-pack result for a 2023 action title. The combo’s position suggests it is neither a top-tier enthusiast setup nor a low-end compromise, but rather a balanced pairing that should handle the game’s demands without obvious bottlenecks. The percentile data reinforces this: both the CPU and GPU sit at the 79th percentile versus all components, indicating they are well-matched in relative capability. What is telling is that the CPU’s average benchmark score of 21765 places it within 0.9% of the Intel Core i7-11700F and 0.6% of both the AMD EPYC 9554P and EPYC 9534, meaning the processor is delivering competitive compute performance across the board. The GPU, meanwhile, trails the NVIDIA GeForce RTX 3080 by 1.3% in average score, a narrow margin that hints at strong rasterization throughput for its class.

GPU Role

The Radeon RX 6750 XT is the primary driver of Overpower’s frame rates, and its specifications explain the measured results. The card packs 12 GB of GDDR6 memory on a 192-bit bus, yielding 432.0 GB/s of bandwidth. That memory configuration is generous for a 2023 release, and it shows in the high-resolution data where texture-heavy scenes at 4K remain playable. The GPU’s base clock of 2150 MHz and boost clock of 2600 MHz, with a game clock of 2495 MHz, are aggressive figures for the RDNA 2.0 architecture. The 40 ray accelerators and 2560 shading units provide the compute backbone, with FP32 throughput rated at 13.31 TFLOPS. In Overpower, these resources translate to a clear scaling pattern: at 1080p Low the combo hits 160.8 FPS, but at 4K Ultra it drops to 57.5 FPS. The 73.6 FPS at 4K High is notable because it shows the GPU can sustain near-60 FPS at the highest resolution with moderate settings, a signal of the 12 GB frame buffer and 432.0 GB/s bandwidth handling 4K asset loads without stuttering. The GPU’s percentile rank of 79 versus all GPUs, combined with its proximity to the RTX 3080 (1.3% slower in average score), suggests the RX 6750 XT is doing heavy lifting here, but the data also shows it is not invincible — the 4K Ultra result dips below 60 FPS, indicating the card’s limits under maximum load.

Resolution Scaling

The FPS progression across resolutions reveals a GPU-bound scenario at higher settings, but a CPU-leaning profile at lower ones. At 1080p Low, the combo produces 160.8 FPS, which drops to 144.9 FPS at 1440p Low and 124.3 FPS at 4K Low — a 22.7% reduction from 1080p to 4K when settings are minimized. That relatively modest decline suggests the CPU is still feeding frames efficiently even at 4K with low details, as the Ryzen 5 5600’s 6 cores and 12 threads can keep up with the GPU’s output. However, the picture changes dramatically when settings rise. At 1080p Ultra, the average is 79.9 FPS, falling to 72.6 FPS at 1440p Ultra and 57.5 FPS at 4K Ultra. The drop from 1080p to 4K at Ultra is 28.0%, a steeper curve that points squarely at the GPU struggling with the increased pixel count and shading work. The data implies a crossover point: at Low settings, the CPU and GPU balance each other, but at Ultra, the RX 6750 XT becomes the limiting factor, particularly at 4K where it cannot maintain 60 FPS. The 4K High result of 73.6 FPS versus 4K Medium’s 78.5 FPS highlights that even small setting changes have outsized effects at high resolutions, a sign that the memory bandwidth and shader throughput are being taxed near their ceiling.

FAQ

Q: How does this combo rank among all tested systems in Overpower?

A: It ranks 838th out of 1744 combos, placing it in the lower-middle portion of the database — a competitive but not exceptional standing for the game.

Q: What is the best resolution for this combo to maintain high frame rates?

A: At 1080p, the combo delivers 160.8 FPS on Low and 95.5 FPS on High, while 1440p High yields 82.4 FPS. The data suggests 1080p or 1440p are ideal, as 4K drops below 60 FPS on Ultra.

Q: Is the CPU or GPU more important for this game’s performance?

A: The scaling from Low to Ultra settings indicates the GPU is the primary bottleneck at high presets. At 4K Ultra, the frame rate falls to 57.5 FPS, while 1080p Low reaches 160.8 FPS, showing the GPU’s limits under load.

Q: How does the GPU compare to its nearest rivals?

A: The RX 6750 XT’s average benchmark score of 35327 is 0.2% higher than the AMD Radeon RX 5600M and 0.3% lower than the NVIDIA GeForce RTX 5070 Ti Mobile. It trails the RTX 3080 by 1.3%.

Q: Does the CPU show any weakness in this pairing?

A: The Ryzen 5 5600’s 6 cores and 12 threads, boosting to 4.40 GHz, provide strong single-thread performance. Its nearest rival, the Intel Core i7-11700F, has a 0.9% higher average score, but the difference is negligible in gaming.

Q: What is the impact of ray tracing on this GPU?

A: The RX 6750 XT includes 40 ray accelerators, but the measured FPS data does not include ray tracing results. The 4K Ultra score of 57.5 FPS suggests that enabling ray tracing would likely push it below playable levels.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor from the 5000 series, built on the Zen 3 architecture with a 7 nm process. Its base clock of 3.50 GHz and boost clock of 4.40 GHz provide solid per-core performance, which is critical for Overpower’s action-oriented gameplay. The CPU’s 32 MB of shared L3 cache helps reduce memory latency, and its dual-channel DDR4 support with 51.2 GB/s bandwidth ensures data flows efficiently to the GPU. Benchmark data shows the CPU achieves a single-thread score of 882 in 3dmark and 2584 in Cinebench R23, while multi-thread scores reach 5659 in 3dmark max threads and 18309 in Cinebench R23. These figures place the CPU at the 79th percentile versus all CPUs, with an average benchmark score of 21765. Its nearest rivals include the Intel Xeon D-1746TER (0.6% faster) and the AMD EPYC 9554P (0.6% slower), indicating the Ryzen 5 5600 is performing at a level that does not bottleneck the RX 6750 XT in most scenarios. The data supports this: at 1080p Low, the combo hits 160.8 FPS, which is high enough that the CPU is not holding back the GPU. However, at 4K Ultra, the frame rate drops to 57.5 FPS, and while this is primarily a GPU limitation, the CPU’s 6 cores may also struggle with the increased draw calls at higher resolutions. The boost clock of 4.40 GHz is particularly relevant for Overpower, as the game likely benefits from high single-thread performance in physics and AI computations.

Settings Recommendations

The measured FPS data provides a clear hierarchy for optimal settings. At 1080p, the Ultra preset delivers 79.9 FPS, which is playable but not smooth on high-refresh-rate monitors. The High preset at 1080p yields 95.5 FPS, a 19.5% improvement over Ultra, while Medium reaches 102.8 FPS and Low tops out at 160.8 FPS. For a balance of visual fidelity and performance, the High preset at 1080p is the sweet spot, offering nearly 100 FPS without sacrificing too much detail. At 1440p, the High preset produces 82.4 FPS, which is still above 60 FPS and suitable for most displays, while Ultra drops to 72.6 FPS. The Medium preset at 1440p yields 87.6 FPS, making it a viable alternative if High is too demanding. At 4K, the situation becomes more constrained: High delivers 73.6 FPS, Medium 78.5 FPS, and Low 124.3 FPS, but Ultra falls to 57.5 FPS. For 4K users, the Medium preset is the best choice, as it provides a 36.5% improvement over Ultra while maintaining a playable frame rate above 60 FPS. The Low preset at 4K is an outlier, achieving 124.3 FPS, but it sacrifices too much visual quality for most players. The data suggests that the combo is best utilized at 1080p High or 1440p Medium, where it can maintain frame rates above 80 FPS with reasonable visual settings.

Measured FPS Breakdown

The measured FPS data spans three resolutions and four settings presets, offering a complete picture of the combo’s performance in Overpower. At 1920x1080, the average frame rates are: Low 160.8 FPS, Medium 102.8 FPS, High 95.5 FPS, and Ultra 79.9 FPS. The progression from Low to Ultra shows a 50.3% reduction in frame rate, with the largest single drop occurring between Low and Medium (36.1%). At 2560x1440, the results are: Low 144.9 FPS, Medium 87.6 FPS, High 82.4 FPS, and Ultra 72.6 FPS. The drop from Low to Medium at this resolution is 39.5%, indicating that the GPU is more sensitive to setting changes at higher pixel counts. At 3840x2160, the averages are: Low 124.3 FPS, Medium 78.5 FPS, High 73.6 FPS, and Ultra 57.5 FPS. The transition from Low to Medium at 4K is 36.8%, but the Medium to High drop is only 6.3%, suggesting diminishing returns on quality settings. The Ultra preset at 4K is the only configuration that falls below 60 FPS, making it the sole unplayable option in the dataset. Across all resolutions, the Low preset consistently outperforms the others, with the 1080p Low result of 160.8 FPS being the highest recorded value. The data reveals that the combo is most efficient at 1080p, where even Ultra maintains 79.9 FPS, while 4K requires a compromise between quality and frame rate.