Outriders

Outriders

AVERAGE FPS
93
good

This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 39 52 72
1440p QHD 54 75 100 137
1080p Full HD 86 119 158 200

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 72
3840x2160 Medium 52
3840x2160 High 39
3840x2160 Ultra 28
2560x1440 Low 137
2560x1440 Medium 100
2560x1440 High 75
2560x1440 Ultra 54
1920x1080 Low 200
1920x1080 Medium 158
1920x1080 High 119
1920x1080 Ultra 86

Outriders with AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5050, In-Depth Analysis

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 5050 combination delivers a highly variable experience in Outriders, with performance scaling that shifts dramatically based on resolution and quality settings. The measured data reveals a system that excels at high refresh rates in 1080p but struggles to maintain playable frame rates at 4K, making it a pairing that demands careful settings management depending on the target display.

Resolution Scaling

The FPS drop from 1080p to 4K in Outriders is steep and telling, indicating that the NVIDIA GeForce RTX 5050 becomes the primary limiting factor at higher resolutions. At High settings, the average frame rate falls from 119 FPS at 1920x1080 to 75 FPS at 2560x1440, a reduction of 44 FPS, and then plummets further to just 39 FPS at 3840x2160. This progression shows a clear pattern: the GPU's rendering load increases exponentially with pixel count, and the RTX 5050's 8 GB of GDDR6 memory and 320.0 GB/s bandwidth are insufficient to maintain fluid performance at 4K.

The scaling behavior is even more pronounced when examining the Low preset. At 1080p Low, the system achieves a very high 200 FPS average, which drops to 137 FPS at 1440p and finally to 72 FPS at 4K. The percentage reduction from 1080p to 4K at Low settings is approximately 64%, while at High settings it is roughly 67%. This consistency suggests that the GPU is the bottleneck across all settings, rather than the CPU, which would typically show less variation with resolution changes.

Analyzing the Medium preset provides the most complete picture, as it includes minimum and maximum frame rate data. At 1080p Medium, the average is 158 FPS with a minimum of 135 FPS and a maximum of 182 FPS, showing a tight frame time distribution. Moving to 1440p Medium, the average drops to 100 FPS with a minimum of 85 FPS and a maximum of 115 FPS. At 4K Medium, the average falls to 52 FPS with a minimum of 44 FPS and a maximum of 60 FPS, revealing that even the minimum frame rate at 4K is below the 60 FPS threshold for smooth gameplay.

The Ultra preset presents the most demanding scenario, with the system managing only 86 FPS at 1080p, 54 FPS at 1440p, and a marginal 28 FPS at 4K. The gap between High and Ultra at each resolution is substantial, indicating that Ultra settings impose a significant additional rendering burden, likely through increased shadow quality, particle effects, and draw distances that overwhelm the RTX 5050's 2560 shading units and 32 ROPs.

Settings Recommendations

For 1080p displays, the data strongly supports High settings as the optimal balance between visual quality and performance. The 119 FPS average at High is well above the 60 FPS standard, and the jump to Ultra only yields 86 FPS, which is a notable decrease for presumably marginal visual gains. The Low preset at 200 FPS is unnecessary for most monitors, though it could benefit competitive players seeking maximum responsiveness.

At 1440p, Medium settings provide the best experience, with a 100 FPS average that comfortably exceeds the 60 FPS target. The High preset at 75 FPS is still playable, but the Medium preset's minimum of 85 FPS offers a more consistent frame pacing, as evidenced by the 85-115 FPS range. The Ultra preset at 54 FPS falls below the 60 FPS threshold, making it unsuitable for smooth gameplay, and the Low preset at 137 FPS sacrifices too much visual fidelity for the incremental performance gain.

For 4K resolution, the situation is challenging. The Medium preset achieves 52 FPS on average with a minimum of 44 FPS, which is technically playable but may exhibit noticeable stuttering during intense combat sequences. The High preset at 39 FPS is borderline, while the Low preset at 72 FPS is the only 4K option that maintains a consistently playable frame rate. Given the data, 4K users should prioritize the Low preset for playability, as the visual quality trade-off is preferable to the sub-45 FPS minimums seen at Medium.

The Ultra preset is not recommended at any resolution above 1080p, as it produces 54 FPS at 1440p and 28 FPS at 4K, both of which are below acceptable thresholds for a looter shooter that requires quick reflexes and smooth target tracking. Even at 1080p, the 86 FPS average at Ultra is significantly lower than the High preset, making it difficult to justify the performance cost.

GPU Role

The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture with a 5 nm process from TSMC, featuring 16,900 million transistors on a 149 mm² die. Its 8 GB of GDDR6 memory operates on a 128-bit bus, providing a memory bandwidth of 320.0 GB/s, which proves to be a limiting factor in Outriders at higher resolutions. The GPU's base clock of 2317 MHz and boost clock of 2572 MHz drive its 2560 shading units, 80 TMUs, and 32 ROPs, delivering a texture rate of 205.8 GTexel/s and a pixel rate of 82.30 GPixel/s.

The RTX 5050's FP32 performance of 13.17 TFLOPS places it in the mid-range segment, and its benchmark results reflect this positioning. In 3DMark Steel Nomad DX12, it scores 2502, while its Passmark G3D score of 17326 and Geekbench OpenCL score of 90334 indicate solid overall compute capability. The GPU's percentile ranking at 66 means it outperforms roughly two-thirds of all GPUs in the database, but its nearest rivals include older and lower-tier parts like the AMD Radeon RX Vega M GL and the AMD Radeon HD 8970M, showing that it competes in the lower mid-range tier of graphics hardware.

The 8 GB VRAM capacity is particularly relevant for Outriders at 4K, where texture-heavy environments and high-resolution assets can exceed this limit. The steep FPS drop from 52 FPS at Medium 4K to 39 FPS at High 4K suggests that memory capacity and bandwidth constraints are being hit, causing the GPU to struggle with the increased data throughput required at higher resolutions. The 20 GB/s effective memory speed and 2500 MHz memory clock provide adequate bandwidth for 1080p and 1440p gaming, but the 4K results indicate that the memory subsystem becomes a bottleneck.

FAQ

*Q: What is the best resolution for this combo in Outriders?*

A: The data shows 1080p is the sweet spot, with High settings delivering 119 FPS average and even Ultra achieving 86 FPS, making it the only resolution where all presets except Low maintain playable frame rates above 60 FPS.

*Q: Can this system handle 4K gaming in Outriders?*

A: Yes, but only with significant compromises. The Low preset at 4K achieves 72 FPS average, while Medium drops to 52 FPS with a 44 FPS minimum, and High falls to 39 FPS, making Low the only consistently playable 4K option.

Q: How does the RTX 5050 compare to its nearest GPU rivals?

A: The RTX 5050 has an average benchmark score of 21035, which is 1.6% ahead of the AMD Radeon RX 5600 XT (20713) and 0.6% behind the AMD Radeon RX Vega M GL (21153), placing it in a tight competitive cluster around this performance level.

Q: Is the Ryzen 7 5800X3D a bottleneck for the RTX 5050?

A: No, the CPU's benchmark results, including a Cinebench R23 multicore score of 14317 and a Geekbench multicore score of 11765, indicate it has ample processing power, and the FPS scaling across resolutions suggests the GPU is the limiting component in Outriders.

Q: What frame rates can be expected at 1440p with High settings?

A: The measured data shows a 75 FPS average at 2560x1440 with High settings, which is playable but notably lower than the 100 FPS average at Medium settings, making Medium the preferred preset for this resolution.

Q: Does the Ultra preset provide a worthwhile performance trade-off?

A: No, the Ultra preset delivers only 86 FPS at 1080p, 54 FPS at 1440p, and 28 FPS at 4K, representing a substantial performance penalty compared to High settings across all resolutions without proportional visual improvements.

How This Combo Ranks

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 5050 combination ranks 1823 out of 2913 tested configurations for Outriders, placing it in the lower-middle portion of the database. This rank reflects the GPU's modest performance tier rather than the CPU's capabilities, as the Ryzen 7 5800X3D's percentile ranking of 80 versus all CPUs demonstrates its strong processing performance.

The combo's ranking is likely dragged down by the 4K results, where the RTX 5050's 8 GB memory and 128-bit bus struggle to maintain playable frame rates. At 1080p, the combination performs admirably, with High settings achieving 119 FPS and Low reaching 200 FPS, which would rank much higher if the database weighted lower resolutions more heavily. However, the comprehensive ranking includes all tested resolutions and settings, and the sub-40 FPS results at 4K Ultra and High significantly penalize the overall position.

The CPU's performance in this pairing is exemplary, with its Cinebench R15 multicore score of 2413 and Passmark multithread score of 28309 showing it can feed the GPU effectively without causing bottlenecks. The RTX 5050, by contrast, shows its limitations in this game, with its Passmark G3D score of 17326 placing it in a tier that is clearly not designed for 4K gaming. The combination's rank of 1823 suggests that users with 1080p or 1440p monitors will find it a capable performer, but those expecting 4K capability will be disappointed.

CPU Role

The AMD Ryzen 7 5800X3D is a desktop processor from the 5000 series, built on the Zen 3 architecture with the Vermeer codename. It features 8 cores and 16 threads, operating at a base clock of 3.40 GHz and a boost clock of 4.50 GHz, with a TDP of 105 W. The processor's 96 MB of shared L3 cache is its standout feature, providing substantial on-die storage that benefits gaming workloads significantly.

In Outriders, the CPU's role is to feed the RTX 5050 with draw calls and game logic, and the benchmark data shows it performs this task admirably. The 3DMark 16-thread score of 7299 and the near-identical max-thread score of 7285 indicate excellent multi-threaded scaling, while the single-thread score of 884 demonstrates strong single-core performance. These results are consistent with the CPU's percentile ranking of 80 versus all CPUs, meaning it outperforms 80% of processors in the database.

The CPU's nearest rivals include the AMD Ryzen 7 6800U with an average score of 27887 (0% delta), the Intel Core i9-10900K at 27872 (0.1% ahead), and the AMD Ryzen AI 5 PRO 340 at 27932 (0.1% behind), showing that the 5800X3D is competitive with much newer and higher-tier processors. The Cinebench R23 multicore score of 14317 and Geekbench multicore score of 11765 further confirm its capability, ensuring that it does not bottleneck the RTX 5050 in Outriders, even at 1080p where CPU overhead is typically highest.

The processor's 7 nm process from TSMC and 8,850 million transistors on a 74 mm² die contribute to its efficiency, and its support for PCIe Gen 4 with 20 lanes provides sufficient bandwidth for the RTX 5050's PCIe 5.0 x8 interface. The launch MSRP was $449, positioning it as a high-end processor at its release, and its end-of-life production status means it remains a viable option for users seeking strong gaming performance without the need for a newer platform.

Hardware Specifications

AMD Ryzen 7 5800X3D

Cores / Threads 8 / 16
Base Clock 3400 MHz
Boost Clock 4500 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5050

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2572 MHz MHz
TDP 130 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5050 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 72.0
3840x2160 Medium 52.0
3840x2160 High 39.0
3840x2160 Ultra 28.0
2560x1440 Low 137.0
2560x1440 Medium 100.0
2560x1440 High 75.0
2560x1440 Ultra 54.0
1920x1080 Low 200.0
1920x1080 Medium 158.0
1920x1080 High 119.0
1920x1080 Ultra 86.0

Outriders with Ryzen 7 5800X3D + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RTX 5050 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X3D + RTX 5050

Explore FPS benchmarks for other games using this same hardware combination.