Fivem

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 3070 combination delivers a broad range of frame rates in Fivem, from a highly playable 107.8 FPS at 1080p Ultra to a demanding 37.9 FPS at 4K Ultra. The data indicates a system that is exceptionally capable at mainstream resolutions but begins to show its limits when pushed to 4K with maximum quality settings.

Resolution Scaling

The measured frame rates show a predictable and steep decline as resolution increases, moving from 1920x1080 to 2560x1440 and finally to 3840x2160. At the High preset, the average frame rate drops from 134.8 FPS at 1080p to 86.9 FPS at 1440p, a reduction of 47.9 FPS. The subsequent jump to 4K is even more punishing, with the average falling to 50.1 FPS, a further loss of 36.8 FPS. This scaling pattern suggests that while the CPU is strong enough to feed the GPU at lower resolutions, the rendering load at 4K begins to overwhelm the graphics card.

The trend is consistent across all settings presets. For instance, on Low settings, the system achieves 212.7 FPS at 1080p, drops to 139.3 FPS at 1440p, and then falls to 78.1 FPS at 4K. This consistent drop of roughly 34-36% when moving from 1440p to 4K across all presets points to a GPU-bound scenario at the higher resolution. The Ryzen 7 5700X3D, with its 8 cores and 16 threads, appears to provide sufficient headroom, as the frame rate decline is almost entirely dictated by the pixel count and the RTX 3070's rendering capacity.

At 1080p, the system is clearly not GPU-bound at lower settings. The massive 212.7 FPS on Low, compared to 170 FPS on Medium and 134.8 FPS on High, shows that the graphics card has significant headroom. The limiting factor at 1080p Low is likely the game's engine or CPU single-thread performance, though the 5700X3D's strong showing in single-thread benchmarks (804 in 3dmark_single_thread) suggests it is not a major bottleneck. The data indicates that for maximum frame rates at 1080p, the setting preset has a larger impact than at higher resolutions, where the GPU becomes the primary constraint.

CPU Role

The AMD Ryzen 7 5700X3D is a Zen 3 architecture processor with 8 cores and 16 threads, featuring a base clock of 3.00 GHz and a boost clock of 4.10 GHz. Its substantial 96 MB of shared L3 cache is a defining characteristic, which is particularly beneficial in games that are sensitive to memory latency. In Fivem, a multiplayer modification, the CPU's role is crucial for handling the physics, AI, and network code for numerous players and entities.

Benchmark data for the CPU shows a significant scaling from 2-thread to multi-thread workloads. The 3dmark score improves from 1575 at 2 threads to 6764 at 16 threads, indicating that the processor utilizes its additional cores effectively. This is relevant for Fivem, which can be demanding on multiple threads. The CPU's percentile rank of 82 against all CPUs places it in a strong position, and its average benchmark score of 24673 is nearly identical to its nearest rivals, such as the Intel Core i7-1360P (24627, 0.2% delta) and the AMD Ryzen 5 7600X3D (24605, 0.3% delta).

In the context of this system's Fivem performance, the CPU's strength is most evident at lower resolutions. The fact that the system can produce 212.7 FPS at 1080p Low suggests that the CPU is not a limiting factor at that resolution. However, the jump from 212.7 FPS at 1080p to 139.3 FPS at 1440p on Low settings shows that the GPU starts to take over as the primary constraint. The CPU's high multi-threaded performance, as indicated by a Cinebench R23 multi-core score of 22366, provides a solid foundation that prevents it from becoming a bottleneck in most scenarios, even when the frame rate is high.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture and features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s. Its core clocks are listed as a base of 1500 MHz and a boost of 1725 MHz. The GPU's performance in the measured Fivem data shows it to be the decisive component when resolution increases.

The RTX 3070's role is clearly demonstrated by the frame rate differences between presets at 4K. At 4K Ultra, the system averages a demanding 37.9 FPS, which increases to 50.1 FPS on High and 59.7 FPS on Medium. This progression shows the GPU's workload scaling with the quality of rendering. The 8 GB VRAM capacity is a potential point of concern for 4K Ultra textures, but the data suggests the card manages it, albeit with a significant performance cost. The GPU's percentile rank of 72 against all GPUs reflects its position in the market, and its average benchmark score of 28238 is closely matched by its rivals, with the AMD Radeon RX 6600 XT being just 0.9% behind and the NVIDIA GeForce GTX 980 Ti being 1% behind.

The data indicates that the RTX 3070 is the primary bottleneck at 4K. The difference between 4K Low (78.1 FPS) and 4K High (50.1 FPS) is substantial, showing that the GPU's processing power is heavily taxed by the increased resolution. At 1080p, the GPU has more headroom, as evidenced by the 212.7 FPS result on Low. However, the difference between 1080p Medium (170 FPS) and 1080p High (134.8 FPS) is still noticeable, indicating that the GPU is still the main driver of performance even at this resolution. The card's 20.31 TFLOPS of FP32 performance and 46 RT cores are not necessarily the primary factors in Fivem's non-ray-traced rendering, but its raw pixel throughput is what determines the scaling seen in the data.

Settings Recommendations

Based on the measured data, the optimal settings for this hardware depend heavily on the target resolution and desired frame rate. For players with high-refresh-rate 1080p monitors, the High preset offers an excellent balance, delivering 134.8 FPS. This is well above the standard 60 FPS threshold and provides a smooth experience. The Medium preset, at 170 FPS, is the better choice for competitive play where maximum frame rates are prioritized, as the visual fidelity difference is often less important than the responsiveness.

At 1440p, the High preset delivers a very good 86.9 FPS, which is suitable for most gaming scenarios. This is the recommended preset for 1440p, as it maintains a high level of visual quality while keeping the frame rate comfortably above 60 FPS. The Medium preset at 112.3 FPS is an alternative for those who want an even smoother experience, but the High preset's visual uplift is generally worth the frame rate trade-off. The Ultra preset at 67.9 FPS is also viable, but it brings the system closer to the edge of its performance envelope.

At 4K, the choices become more constrained. The High preset, at 50.1 FPS, is the best option for a balance of quality and performance, though it falls short of a locked 60 FPS. The Medium preset at 59.7 FPS is the closest to achieving a 60 FPS target, and it is recommended for those who prioritize frame rate over maximum visual detail. The Ultra preset at 37.9 FPS is not recommended for a smooth experience, as it drops below the playable threshold for many users. The Low preset at 78.1 FPS is surprisingly playable, but it sacrifices significant visual fidelity. For the best overall 4K experience, the Medium preset provides the highest frame rate that remains close to a target of 60 FPS.

FAQ

Q: Can this system run Fivem at 1440p with high settings?

A: Yes. The measured data shows an average frame rate of 86.9 FPS at 2560x1440 with the High preset, indicating a smooth and playable experience.

Q: What is the maximum frame rate achievable at 1080p?

A: The highest average frame rate recorded is 212.7 FPS, which is achieved at 1920x1080 with the Low preset. With the High preset, the system still delivers a very high 134.8 FPS.

Q: Is the CPU or GPU the main bottleneck at 4K resolution?

A: The data indicates the GPU is the limiting factor at 3840x2160. Frame rates decline sharply from 78.1 FPS on Low to 37.9 FPS on Ultra, showing the graphics card's rendering capacity is the primary constraint at this resolution.

Q: How does the CPU's performance compare to its closest rivals?

A: The AMD Ryzen 7 5700X3D has an average benchmark score of 24673. This is 0.2% higher than the Intel Core i7-1360P's score of 24627 and 0.3% higher than the AMD Ryzen 5 7600X3D's score of 24605. It is 0.6% behind the AMD Ryzen AI Max 385, which scores 24811.

Q: What is the recommended preset for a stable 60 FPS experience at 4K?

A: The Medium preset is the most appropriate for targeting 60 FPS at 3840x2160, as it delivers an average of 59.7 FPS. The High preset is slightly lower at 50.1 FPS, while the Ultra preset falls to 37.9 FPS.

Q: What is the framerate difference between 1080p and 4K on the High preset?

A: The average frame rate drops from 134.8 FPS at 1920x1080 to 50.1 FPS at 3840x2160 on the High preset. This represents a significant reduction of 84.7 FPS when moving to 4K resolution.