Fivem

Fivem, released in 2017, presents a unique challenge for hardware evaluation due to its multiplayer focus and reliance on both CPU and GPU resources. The measured data for the AMD Ryzen AI Max+ 395 paired with the NVIDIA GeForce RTX 5050 provides a detailed look at how this combination handles the game's demands across resolutions and settings. The data indicates a system capable of high refresh rate gameplay at 1080p, but one that faces significant limitations as resolution and graphical fidelity increase.

Resolution Scaling

The performance trajectory from 1080p to 4K clearly illustrates where the bottleneck lies for this combo. At 1920x1080 with High settings, the combo achieves an average of 88 FPS. Moving to 2560x1440 High, the average drops to 58 FPS, a reduction of 34%. The climb to 3840x2160 High further reduces the average to 32 FPS, which is a 64% drop from the 1080p figure. This scaling pattern is steep, indicating that the render resolution has a profound impact on frame rates.

This behavior points directly to the GPU as the primary limiting factor at higher resolutions. The RTX 5050, with its 8 GB of VRAM and 128-bit memory bus, is being tasked with an increasing number of pixels. The 320.0 GB/s of memory bandwidth becomes a critical constraint. At 4K, the GPU must process four times the pixels of 1080p, and the data shows it cannot keep up, resulting in sub-60 FPS averages even on Low settings. The CPU, while powerful, is not the primary constraint here, as evidenced by the fact that lowering settings at 4K yields significant gains (from 32 FPS at High to 51 FPS at Low), which would not occur if the CPU were the bottleneck.

However, the scaling is not perfectly linear, which suggests a mixed workload. For instance, at 1440p, the drop from Low (91 FPS) to High (58 FPS) is a 36% reduction. At 4K, the same settings change results in a 37% reduction (51 to 32 FPS). This consistency suggests that while the GPU is the main constraint, the CPU's role in handling the game's multiplayer logic and physics is still a constant factor. The system is well-balanced for 1080p, where the CPU can feed the GPU effectively, but the GPU's capabilities are exhausted as resolution climbs, making the frame rate drop rapidly.

How This Combo Ranks

In the grand scheme of tested configurations for Fivem, this combination of CPU and GPU holds a specific position. The data places this combo at rank 2387 out of 3005 tested combos. This percentile placement, roughly in the 21st percentile from the top, indicates that while the system is functional, it is not a top-tier performer for this specific game. The ranking suggests that a significant majority of other CPU/GPU pairings deliver higher average frame rates.

The ranking is likely dragged down by the GPU's performance relative to other components. The RTX 5050's average benchmark score places it in the 66th percentile of all GPUs, which is a middle-of-the-pack position. Its nearest rivals, such as the AMD Radeon RX 5600 XT (1.6% higher score) and the AMD Radeon RX Vega M GL (-0.6% lower score), are not known for high-end 4K performance. This aligns with the measured FPS data, which shows the combo struggling at 4K. The CPU, on the other hand, is a high performer, sitting in the 95th percentile of all CPUs. The disparity in their individual rankings—a strong CPU paired with a mid-range GPU—means the system is not optimized for maximum Fivem performance, as the GPU is the limiting factor in many scenarios. This pairing results in a system that is far more capable in CPU-bound tasks than in GPU-bound gaming at high resolutions.

FAQ

Q: What is the highest average frame rate this combo can achieve in Fivem?

A: The highest measured average frame rate is 139 FPS, which is achieved at 1920x1080 resolution with Low settings.

Q: Can this system handle 4K gaming in Fivem?

A: At 3840x2160, the system produces an average of 32 FPS on High settings and 25 FPS on Ultra. Even on Low settings, it only reaches an average of 51 FPS, indicating that 4K gameplay is not a smooth experience.

Q: How does the CPU's performance compare to its rivals?

A: The AMD Ryzen AI Max+ 395 has an average benchmark score of 77740. This places it 1.6% ahead of the AMD Ryzen Threadripper PRO 9945WX and the AMD EPYC Embedded 8224P, and 1.7% behind the Intel Core i9-14900K.

Q: What is the impact of changing settings from High to Ultra at 1440p?

A: At 2560x1440, moving from High to Ultra settings reduces the average frame rate from 58 FPS to 45 FPS, a 22% decrease in performance.

Q: What is the GPU's benchmark percentile ranking?

A: The NVIDIA GeForce RTX 5050 is in the 66th percentile of all GPUs based on its average benchmark score.

Q: Is there a significant difference between Low and Medium settings at 1080p?

A: Yes, the difference is notable. At 1920x1080, Low settings yield an average of 139 FPS, while Medium settings yield an average of 109 FPS. This represents a 22% drop in frame rate for the visual quality increase.

Measured FPS Breakdown

The measured frame rate data provides a comprehensive view of the system's performance across all settings and resolutions.

At 1920x1080, the combo is most comfortable. With Low settings, the average FPS is 139. Medium settings produce an average of 109 FPS, with a minimum of 93 and a maximum of 126 FPS. High settings yield an average of 88 FPS. The most demanding preset, Ultra, still manages an average of 68 FPS. This shows that at 1080p, the system can deliver a smooth experience on all presets, with even the highest quality settings remaining playable.

Moving to 2560x1440, the performance drops are more pronounced. Low settings average 91 FPS, which is still very smooth. Medium settings average 72 FPS, with a range of 61 to 83 FPS. High settings drop to a 58 FPS average. Ultra settings push the system to a 45 FPS average, which begins to feel less fluid for fast-paced multiplayer action.

At 3840x2160, the system's limitations are fully exposed. Low settings average 51 FPS, which is marginal for a multiplayer title. Medium settings average 40 FPS, with a minimum of 34 and a maximum of 46 FPS. High settings drop to 32 FPS. Ultra settings are the most demanding, yielding an average of just 25 FPS. These numbers indicate that 4K gaming is not a viable option for this combo if a consistent high frame rate is desired.

CPU Role

The AMD Ryzen AI Max+ 395 is a 16-core, 32-thread processor based on the Zen 5 architecture. Its base clock is 3.00 GHz, with a boost clock of 5.10 GHz. This high core count and thread count, combined with a 64 MB shared L3 cache, position it as a formidable processor for multi-threaded workloads. Its benchmark results reflect this, with a Cinebench R23 multi-core score of 35314 and a Geekbench multi-core score of 20992. The CPU's 95th percentile ranking among all CPUs confirms its high-end status.

In Fivem, the CPU's role is to manage the game's simulation, including player positions, physics, and network data. The data suggests that this CPU is not the primary bottleneck for this combo, especially at higher resolutions. This is evidenced by the fact that at 4K, reducing the graphics settings from High to Low increases the average frame rate from 32 FPS to 51 FPS. If the CPU were the limiting factor, this settings change would have little to no effect on the frame rate. The CPU provides a strong foundation that allows the GPU to be the deciding factor in performance. The CPU's high performance ensures that even with a mid-range GPU, the system can achieve high frame rates at lower resolutions where the GPU is not fully saturated.

Settings Recommendations

Based on the measured data, the optimal settings depend heavily on the target resolution and desired frame rate. For players with a 1080p monitor, the High preset is an excellent choice, delivering an 88 FPS average. This provides a great balance between visual fidelity and performance. For those seeking the highest possible frame rates for competitive play, the Low preset at 139 FPS is the best option, though it sacrifices visual quality. The Medium preset at 109 FPS is a strong middle ground for 1080p.

At 1440p, the recommendation becomes more nuanced. The High preset at 58 FPS is playable but might not be ideal for fast-paced scenarios. The Medium preset at 72 FPS is a better option for maintaining a smoother experience, while the Low preset at 91 FPS is the best choice for competitive play. The Ultra preset at 45 FPS is not recommended due to its lower frame rate.

At 4K, the data shows that no setting provides a consistently smooth experience. The Low preset at 51 FPS is the only option that approaches playability, but it still has moments of frame rate dips. For a more consistent experience at this resolution, players would need to consider lowering the resolution or accepting a lower frame rate. The Medium preset at 40 FPS is the best visual quality to performance ratio, but it falls below the 60 FPS threshold. In summary, the system is best utilized at 1080p or 1440p with Medium to High settings.

GPU Role

The NVIDIA GeForce RTX 5050 is a discrete graphics card based on the Blackwell 2.0 architecture. It features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 320.0 GB/s. The GPU has a base clock of 2317 MHz and a boost clock of 2572 MHz. Its compute capabilities are defined by 2560 shading units, 80 TMUs, and 32 ROPs. The card's average benchmark score places it in the 66th percentile of all GPUs, and its performance is closely matched by the AMD Radeon RX 5600 XT, which has a 1.6% higher average score.

The GPU is the dominant factor in the performance of this combo in Fivem, particularly at high resolutions. The 8 GB VRAM is a potential constraint at 4K, where high-resolution textures can consume a significant amount of memory. However, the more pressing limitation is the memory bandwidth. The 320.0 GB/s bandwidth is insufficient for the demands of 4K rendering, which requires the GPU to move a massive amount of pixel data. This is clearly reflected in the steep frame rate drops observed when moving from 1440p to 4K. The GPU's performance scales as expected with settings changes, but its absolute performance ceiling is the key limiting factor for this system. The RTX 5050 is a capable card for 1080p and 1440p gaming, but it is not equipped for high-refresh-rate 4K gaming in a demanding multiplayer title like Fivem.