Fivem

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4060 combination ranks 1,993 out of 3,707 tested combos in Fivem, placing it in the 46th percentile of all system pairings. This mid-pack standing indicates a balanced pairing that lands squarely in the upper-middle tier of performance, though it is not a top-tier contender for this particular multiplayer title. The rank suggests that while many systems outperform this combo, a significant majority of tested configurations deliver worse results, making it a dependable baseline for high-refresh-rate 1080p play.

How This Combo Ranks

The combo’s rank of 1,993 out of 3,707 places it just past the halfway point of all tested systems, yet the actual frame rates tell a more nuanced story. At 1080p, this pairing delivers an average of 189 FPS on Low settings, which is exceptional for a multiplayer title where frame time consistency often matters more than raw graphical fidelity. The rank reflects the presence of far more expensive and powerful combinations above it, but the measured data shows this CPU-GPU duo punches well above its positional standing in practical gaming scenarios.

Breaking down the rank by resolution, the combo’s standing improves as resolution decreases. At 4K, the average FPS of 44 on High settings is playable but not competitive for fast-paced multiplayer, explaining why the overall rank is not higher. The 1440p results show a stronger position, with 78 FPS on High, while the 1080p results—119 FPS on High and 149 FPS on Medium—demonstrate that this combo is optimized for the most common esports and multiplayer resolution. The gap between the combo’s mid-pack rank and its excellent 1080p performance suggests that many higher-ranked systems are configured for 4K or ultra-wide gaming, leaving this pairing as a specialist for competitive play.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process and features 8 GB of GDDR6 memory on a 128-bit bus, delivering 272.0 GB/s of bandwidth. The GPU’s boost clock of 2460 MHz and base clock of 1830 MHz are paired with 3072 shading units, 96 texture mapping units, and 48 raster output pipelines. For Fivem, a game that is often CPU-bound in populated servers, the RTX 4060’s 15.11 TFLOPS of FP32 performance provides ample headroom for the game’s moderate graphical demands.

The GPU’s memory configuration is a critical factor at higher resolutions. The 8 GB VRAM capacity is sufficient for 1080p and 1440p gameplay at all tested settings, but at 4K Ultra, the average FPS drops to 34, indicating that both memory bandwidth and capacity are stretched thin. The measured data shows a steep performance cliff between 1440p Ultra at 61 FPS and 4K Ultra at 34 FPS, a 44% reduction that points to the 128-bit memory bus as a limiting factor. The GPU’s PassMark G3D score of 19,545 places it in the 61st percentile of all GPUs, with nearest rivals including the AMD Radeon HD 7790 (0.2% slower) and AMD Radeon 780M (0.3% faster), showing that the RTX 4060 sits in a tightly contested performance band.

Settings Recommendations

The measured FPS rows provide a clear hierarchy for optimizing the Fivem experience. At 1080p, the Low preset delivers 189 FPS, while Medium drops to 149 FPS and High to 119 FPS. The step from Low to Medium costs 40 FPS (21%), while the step from Medium to High costs another 30 FPS (20%). Ultra at 1080p yields 92 FPS, which is a 23% reduction from High. For competitive multiplayer, the Medium preset at 1080p offers the best balance, providing 149 FPS with a minimum of 127 FPS and maximum of 171 FPS, ensuring smooth frame pacing during intense server activity.

At 1440p, the Medium preset delivers 98 FPS with a minimum of 83 FPS, which remains comfortably above 60 FPS for most displays. High at 1440p drops to 78 FPS, still playable but with less headroom for frame drops in crowded areas. The Low preset at 1440p provides 124 FPS, which is ideal for players with high-refresh-rate 1440p monitors who prioritize responsiveness over visual quality. At 4K, only the Low preset (69 FPS) achieves a consistently playable frame rate; Medium (54 FPS) and High (44 FPS) are borderline, while Ultra (34 FPS) is not recommended for any gameplay scenario. The data indicates that the Medium preset at 1080p or 1440p is the sweet spot for this combo, delivering high frame rates without sacrificing the visual clarity needed to spot distant objects or players.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows 1080p is the strongest resolution, with 189 FPS on Low, 149 FPS on Medium, and 119 FPS on High. At 1440p, the Medium preset still delivers 98 FPS, making it viable, but 4K performance drops significantly, with only the Low preset exceeding 60 FPS at 69 FPS.

Q: How does the Ultra preset compare to High at 1440p?

A: At 1440p, the High preset averages 78 FPS, while Ultra drops to 61 FPS, a 22% reduction. The Ultra preset’s lower frame rate may introduce noticeable stutter in fast-paced scenarios, making High the better choice for maintaining smooth gameplay.

Q: Is the RTX 4060’s 8 GB VRAM sufficient for Fivem?

A: The measured results show that 8 GB is adequate for 1080p and 1440p across all settings, with the 4K Ultra preset (34 FPS) being the only configuration that appears to strain the memory subsystem. At 4K Low, the combo still achieves 69 FPS, indicating the VRAM capacity is not a hard bottleneck until very high settings are combined with 4K resolution.

Q: How does this combo rank compared to other tested systems?

A: The combination ranks 1,993 out of 3,707 tested combos, placing it in the 46th percentile. This mid-pack standing is driven by strong 1080p performance (189 FPS on Low) but weaker 4K results (44 FPS on High), which pull the overall rank down.

Q: What is the frame time consistency at 1080p Medium?

A: The Medium preset at 1080p shows a minimum of 127 FPS and a maximum of 171 FPS, with an average of 149 FPS. This 44 FPS spread indicates good consistency, though the Low preset’s 189 FPS average likely provides even tighter frame pacing for competitive play.

Q: Does the CPU or GPU limit performance at 4K?

A: The 4K results show a steep drop from Low (69 FPS) to Medium (54 FPS) to High (44 FPS), a pattern that indicates the GPU is the primary limiter at this resolution. The RTX 4060’s 128-bit memory bus and 272.0 GB/s bandwidth are insufficient to maintain high frame rates as texture and shading demands increase.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern across resolutions. Moving from 1080p to 1440p at the High preset reduces the average from 119 FPS to 78 FPS, a 34% drop. The subsequent step from 1440p to 4K at High brings the average down from 78 FPS to 44 FPS, another 44% reduction. This compounding decline indicates that the GPU becomes increasingly stressed as pixel count rises, with the 4X pixel count of 4K (compared to 1080p) overwhelming the RTX 4060’s bandwidth and compute resources.

The scaling behavior differs by preset. At Low settings, the frame rate drops from 189 FPS at 1080p to 124 FPS at 1440p (34% decrease) and then to 69 FPS at 4K (44% decrease from 1440p). The proportional drops are nearly identical across presets, suggesting that the GPU’s memory bandwidth is the consistent limiting factor. At Medium settings, the 1080p to 1440p drop is from 149 FPS to 98 FPS (34%), and the 1440p to 4K drop is from 98 FPS to 54 FPS (45%). This uniformity indicates that the RTX 4060’s 128-bit bus is the primary constraint, as doubling resolution consistently halves the achievable frame rate regardless of graphical complexity.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael, manufactured on TSMC’s 5 nm process. With a base clock of 3.70 GHz and a boost clock of 5.00 GHz, this CPU delivers strong single-thread performance, as evidenced by its 3DMark single-thread score of 974 and Cinebench R23 single-core score of 3,218. The 32 MB of shared L3 cache and 65 W TDP make it an efficient choice for gaming, where it ranks in the 77th percentile of all CPUs with an average benchmark score of 24,964.

In Fivem, the CPU’s role is critical because the game’s multiplayer servers often have many players interacting with complex scripts, which can create CPU bottlenecks independent of GPU load. The Ryzen 5 7500F’s multi-threaded performance, shown by its Cinebench R23 multi-core score of 22,799 and PassMark multithread score of 26,825, provides sufficient headroom for these server-side computations. The measured FPS data supports this, as the 1080p Low preset achieves 189 FPS, a result that would be impossible if the CPU were severely limiting. The CPU’s nearest rivals include the Intel Core i7-11850H (0.1% faster), AMD Ryzen 5 8400F (0.2% slower), and Intel Core i7-13620H (0.2% faster), showing that the 7500F is competitively positioned against mobile and desktop parts alike. At 4K, where the GPU becomes the bottleneck, the CPU’s performance headroom means it does not compound the frame rate drops, allowing the RTX 4060 to operate as the sole limiter.