Fivem

Fivem, a multiplayer modification platform, presents a unique performance profile that depends heavily on both CPU and GPU resources. The measured data for the AMD Ryzen 5 7500F and AMD Radeon RX 7600 XT combination reveals a system that is capable of high frame rates at mainstream resolutions, but which shows clear scaling limitations as resolution and graphical fidelity increase. The following analysis breaks down the measured FPS data, contextualizes the performance against other tested combinations, and examines the individual roles of the processor and graphics card in shaping this experience.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 clearly illustrates where this combination's strengths and weaknesses lie. At 1920x1080 with Low settings, the system produces an average of 166 FPS. Moving to 2560x1440 at the same Low settings drops this to 111.8 FPS, a reduction of approximately 32%. The jump to 3840x2160 Low yields 59.8 FPS, which is nearly half of the 1440p result. This steep decline indicates that the GPU is becoming a more significant bottleneck as pixel count increases.

The scaling pattern under High settings tells a similar story, though from a lower starting point. The combo achieves 103.6 FPS at 1080p High, falls to 67.3 FPS at 1440p, and then drops sharply to 38.9 FPS at 4K. This represents a 62% total reduction from 1080p to 4K. The data suggests that at 1080p, the CPU is likely doing more of the heavy lifting, as the frame rates are high enough that the graphics card is not saturated. As resolution climbs, the GPU's workload expands, and the frame rate falls in a way that points to the RX 7600 XT being the primary limiting factor at 4K.

Ultra settings provide the clearest evidence of GPU limitation. The frame rate at 1080p Ultra is 80.7 FPS, which is still playable, but 1440p Ultra drops to 52.5 FPS and 4K Ultra produces just 28.3 FPS. The scaling from 1080p to 4K at Ultra is a 65% performance loss. This data points to a system that is well-suited for high-refresh-rate gaming at 1080p, capable of solid performance at 1440p with adjusted settings, but not a candidate for smooth 4K gaming at high detail levels.

How This Combo Ranks

Within the comprehensive database of tested hardware combinations, this pairing of the Ryzen 5 7500F and RX 7600 XT holds a specific standing for Fivem. The combo ranks at position 1152 out of 1792 total tested combinations. This places it in the lower-middle portion of the field, indicating that while it is not a bottom-tier performer, a substantial number of other CPU-GPU pairings deliver higher frame rates in this specific game.

The rank is a composite measure that reflects the balance of the processor and graphics card. The CPU itself sits at the 82nd percentile against all CPUs in the database, suggesting strong processing capability. The GPU, however, is at the 63rd percentile against all GPUs. The combination of a high-percentile CPU with a more mid-range GPU likely contributes to the relatively modest overall combo rank, as the graphics card may not allow the processor to fully stretch its legs in Fivem's multiplayer environments. This suggests that the pairing is well-balanced for some titles but leaves performance on the table in a game like Fivem, which can be sensitive to both single-threaded CPU speed and raw GPU throughput.

GPU Role

The AMD Radeon RX 7600 XT is built on the RDNA 3.0 architecture and features 16 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 288.0 GB/s. The card's boost clock is rated at 2755 MHz, with a game clock of 2470 MHz. These specifications indicate a card designed for high-resolution texture workloads, and the 16 GB frame buffer is a notable asset in modern titles.

In Fivem, the GPU's memory capacity is unlikely to be a limiting factor, as the game's art style and typical modded content rarely exceed 8 GB of VRAM even at 4K. Instead, the raw compute performance and memory bandwidth are more relevant. The measured FPS data shows the card's limits clearly at 4K, where it averages 38.9 FPS on High settings. The 128-bit memory bus, while paired with fast GDDR6, may constrain performance in scenarios with heavy texture streaming, which is common in Fivem's open-world multiplayer servers. The card's PassMark G3D score of 17132 and its 3DMark Steel Nomad DX12 score of 2348 provide a general indication of its rasterization performance, which aligns with the measured frame rates in this game. The GPU's 22.57 TFLOPS of FP32 compute is respectable, but the data shows it is not enough to maintain high frame rates at 4K Ultra, where it falls to 28.3 FPS.

Measured FPS Breakdown

The complete set of measured average frame rates provides a detailed picture of performance across all settings and resolutions. At 1920x1080, the system delivers its best results: Low settings achieve 166 FPS, Medium produces 130.2 FPS, High yields 103.6 FPS, and Ultra results in 80.7 FPS. These numbers show a clear and consistent progression, with a 51% performance gap between Low and Ultra settings at this resolution.

Moving to 2560x1440, the averages are 111.8 FPS for Low, 84 FPS for Medium, 67.3 FPS for High, and 52.5 FPS for Ultra. The gap between Low and Ultra narrows to 53%, which is a similar ratio to 1080p. However, the absolute numbers are lower, reflecting the increased pixel workload. The 1440p results suggest that players seeking 100+ FPS will need to use Low or Medium settings, while those with 60 Hz monitors can comfortably use High settings.

At 3840x2160, the performance takes a significant hit. Low settings produce 59.8 FPS, Medium drops to 48.2 FPS, High falls to 38.9 FPS, and Ultra sinks to 28.3 FPS. None of these results are ideal for smooth gameplay, and even Low settings at 4K fall below the 60 FPS threshold. This data confirms that 4K gaming in Fivem is not a strength for this combination, and users would need to consider lower resolutions or significant graphical compromises to achieve playable frame rates.

FAQ

Q: What is the best resolution for this combo to achieve 60+ FPS in Fivem?

A: The data shows that 60+ FPS is achievable at 1920x1080 on all settings, with a minimum of 80.7 FPS on Ultra. At 2560x1440, only Low and Medium settings (111.8 and 84 FPS) exceed the 60 FPS threshold, while High (67.3 FPS) also passes, but Ultra (52.5 FPS) falls short. At 3840x2160, only Low settings (59.8 FPS) come close to 60 FPS.

Q: How much performance is lost when moving from 1080p to 4K?

A: The loss varies by settings. At Low settings, the drop is from 166 FPS to 59.8 FPS, a 64% reduction. At High settings, it falls from 103.6 FPS to 38.9 FPS, a 62% reduction. At Ultra, the decline is from 80.7 FPS to 28.3 FPS, which is a 65% reduction.

Q: Is the 16 GB VRAM on the RX 7600 XT useful for Fivem?

A: The 16 GB memory is a large frame buffer, but the measured FPS data does not show any specific VRAM-related bottlenecks in Fivem. The performance drops at higher resolutions are more consistent with raw GPU compute and bandwidth limitations rather than memory capacity issues, as the game likely does not exceed the available VRAM even at 4K.

Q: How does this combo rank compared to all other tested combinations?

A: This pairing ranks 1152 out of 1792 tested combinations for Fivem. This places it in the lower-middle range, indicating that many other CPU and GPU pairings produce higher frame rates in this specific game.

Q: What are the FPS numbers for 1440p Ultra settings?

A: At 2560x1440 with Ultra settings, the average FPS is 52.5. This is below the 60 FPS mark, suggesting that players using this resolution and settings will experience some stutter or may need to adjust settings for smoother gameplay.

Q: Does the CPU or GPU limit performance more at 1080p?

A: The data suggests the CPU is more relevant at 1080p, as the frame rates are high (up to 166 FPS on Low), which puts more pressure on the processor to feed frames. As resolution increases to 4K, the GPU becomes the clear limiting factor, as evidenced by the sharp drop in frame rates regardless of settings.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. It has 32 MB of shared L3 cache and supports DDR5 memory. This CPU is a strong performer, as indicated by its 82nd percentile ranking against all CPUs and its Cinebench R23 multicore score of 22799 and single-core score of 3218.

In Fivem, the CPU's role is significant due to the game's multiplayer nature. Fivem servers often involve many players and scripts, which can create heavy single-threaded workloads. The 7500F's high boost clock and strong single-core performance are beneficial here. The 3DMark single-thread score of 974 and PassMark single-thread score of 3841 indicate robust per-core capability. The data shows that at 1080p Low settings, the system achieves 166 FPS, which is a high enough frame rate that the CPU is likely the primary driver. The processor's nearest rivals include the Intel Core i7-11850H and AMD Ryzen 9 6900HX, with the 7500F performing within 0.4% of these parts in average benchmark scores, confirming its competitive standing.

The CPU's 6 cores and 12 threads are sufficient for Fivem's typical workload, which does not scale perfectly across many cores. The 65W TDP suggests efficient operation, and the processor's ability to maintain high clock speeds is critical for maintaining frame rates in crowded areas of the game world. The benchmark results indicate that the Ryzen 5 7500F provides a solid foundation for this system, but the overall combo rank is held back by the GPU's performance at higher resolutions.