Fivem

# How This Combo Ranks

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce GTX 1080 Ti sits at rank 1061 out of 1792 tested combos in Fivem, placing it in the lower-middle portion of the database. This ranking reflects a system that is capable of smooth playable frame rates at most settings, but falls well short of the top-tier configurations that dominate this multiplayer title. The combo's position indicates that while neither component is a bottleneck in absolute terms, the pairing doesn't unlock the kind of high-refresh-rate performance that competitive Fivem players often seek.

The CPU's average benchmark score of 24993 places it in the 82nd percentile among all processors, which is a strong showing for a mid-range chip. However, the GPU's average benchmark score of 19402 puts it in only the 61st percentile among all graphics cards, dragging the overall combo ranking down. This disparity suggests that the Ryzen 5 7500F has more headroom than the GTX 1080 Ti can exploit in Fivem's CPU-bound scenarios, but the GPU becomes the limiting factor as resolution and settings increase. The measured FPS data confirms this: at 1080p Low, the combo delivers 179.3 FPS, showing the CPU can push high frame rates, but at 4K Ultra, it drops to 29.3 FPS, a figure that clearly indicates GPU saturation.

# GPU Role

The GTX 1080 Ti operates with a base clock of 1481 MHz and a boost clock of 1582 MHz, built on the 16 nm Pascal architecture with the GP102 chip. Its 11 GB of GDDR5X memory runs at 1376 MHz with an effective speed of 11 Gbps, delivering a memory bandwidth of 484.4 GB/s across a 352-bit bus. These specifications are substantial for a card from the GeForce 10-series, and the data shows they matter most at higher resolutions.

In Fivem, the GPU's role becomes increasingly dominant as resolution climbs. At 1080p, the combo achieves 179.3 FPS on Low settings, 141.3 FPS on Medium, 113 FPS on High, and 85.7 FPS on Ultra. Moving to 1440p, the frame rates drop to 120.3, 93.1, 73.8, and 57 FPS respectively. At 4K, the GTX 1080 Ti's limitations become stark: it manages 66.2 FPS on Low, 49.7 FPS on Medium, 41.8 FPS on High, and just 29.3 FPS on Ultra. The gap between Low and Ultra settings at 4K is 36.9 FPS, showing how much headroom the Pascal architecture has when shading units are relieved of heavy effects work.

The GPU's 3584 shading units, 224 texture mapping units, and 88 ROPs produce a pixel rate of 139.2 GPixel/s and a texture rate of 354.4 GTexel/s. Its FP32 performance of 11.34 TFLOPS is respectable but dated by modern standards. Compared to its nearest rivals, the GTX 1080 Ti is essentially tied with the GTX 780 (0% delta), slightly behind the Radeon Pro 560X (-0.1%), and roughly 1.1% ahead of the TITAN Xp. This clustering indicates that in Fivem, the card performs as expected for its class — not exceptional, not deficient.

# FAQ

Q: What is the best resolution to play Fivem with this combo?

A: At 1080p, the combo delivers between 85.7 FPS on Ultra and 179.3 FPS on Low, making it playable at all settings. At 1440p, frame rates range from 57 FPS on Ultra to 120.3 FPS on Low, which remains smooth for most users. At 4K, only Low settings (66.2 FPS) approach playable territory, while Ultra drops to 29.3 FPS.

Q: How does the GTX 1080 Ti compare to its nearest GPU rivals in this game?

A: The GTX 1080 Ti's average benchmark score of 19402 is essentially identical to the GTX 780 (19405, 0% delta), slightly behind the Radeon Pro 560X (19426, -0.1%), and ahead of the NVIDIA TITAN Xp (19184, 1.1% delta). This means the card performs in line with its peers, with no significant advantage or disadvantage.

Q: Is the Ryzen 5 7500F a strong CPU for this game?

A: The CPU's average benchmark score of 24993 places it in the 82nd percentile, with nearest rivals including the Intel Core i7-11850H (0.1% ahead), AMD Ryzen 7 2700X (0.3% behind), AMD Ryzen 5 8400F (0.3% behind), and AMD Ryzen 9 6900HX (0.4% ahead). This indicates the 7500F is well above average and unlikely to bottleneck in Fivem's CPU-heavy scenarios.

Q: What settings should I use for 60 FPS gameplay?

A: At 1080p, all settings exceed 60 FPS, with Ultra hitting 85.7 FPS. At 1440p, High (73.8 FPS) and Medium (93.1 FPS) clear 60 FPS, while Ultra (57 FPS) falls just short. At 4K, only Low (66.2 FPS) reaches 60 FPS; Medium (49.7 FPS) and above do not.

Q: How much does the CPU's single-thread performance matter here?

A: The Ryzen 5 7500F scores 974 in 3DMark single-thread and 3218 in Cinebench R23 single-core, both strong figures. In Fivem, a multiplayer title with many AI and physics calculations, this single-thread strength helps maintain high frame rates at lower resolutions, as evidenced by 179.3 FPS at 1080p Low.

Q: Is this combo better suited for 1080p or 1440p gaming?

A: The data shows 1080p is the sweet spot, with all settings producing frame rates above 85 FPS. At 1440p, the combo remains playable on Low through High settings (57–120.3 FPS), but Ultra dips to 57 FPS, which is borderline for fast-paced multiplayer. 4K is only viable on Low settings.

# Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance. Low settings produce an average of 179.3 FPS, which is more than double the 85.7 FPS seen at Ultra. Medium settings hit 141.3 FPS, while High settings reach 113 FPS. The scaling from Low to Ultra represents a 93.6 FPS drop, indicating that Fivem's visual effects at higher presets heavily tax the GTX 1080 Ti's shading units and ROPs.

At 2560x1440, the frame rates remain respectable but show clear GPU pressure. Low settings yield 120.3 FPS, falling to 93.1 FPS at Medium, 73.8 FPS at High, and 57 FPS at Ultra. The delta between Low and Ultra here is 63.3 FPS, a smaller absolute drop than at 1080p but a larger percentage decline (47.4% versus 52.2% at 1080p). This suggests the GPU's memory bandwidth of 484.4 GB/s starts to become a limiting factor at this resolution.

At 3840x2160, the GTX 1080 Ti struggles to maintain playable frame rates except on the lowest preset. Low settings average 66.2 FPS, which is technically smooth, but Medium drops to 49.7 FPS, High to 41.8 FPS, and Ultra to 29.3 FPS. The 36.9 FPS gap between Low and Ultra at 4K is the smallest of any resolution, indicating that the GPU is already near its limits even on Low settings. The 11 GB frame buffer is sufficient for 4K textures, but the Pascal architecture's raw compute power (11.34 TFLOPS FP32) cannot keep up with the pixel workload.

Comparing resolutions at the same settings, the drop from 1080p to 1440p is roughly 33% across all presets, while the drop from 1440p to 4K is approximately 45% on Low and Medium, but only 43% on High and 49% on Ultra. This non-linear scaling highlights how the GPU's fillrate and bandwidth interact with Fivem's rendering demands.

# CPU Role

The AMD Ryzen 5 7500F brings six cores and twelve threads based on the Zen 4 architecture, manufactured on TSMC's 5 nm process. Its base clock of 3.70 GHz boosts up to 5.00 GHz, and it draws a 65 W TDP. The CPU's cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3, which is ample for Fivem's asset streaming and entity management.

In Fivem, which is known for its CPU sensitivity in multiplayer scenarios, the 7500F's strong single-thread performance is crucial. Its 3DMark single-thread score of 974 and Cinebench R23 single-core score of 3218 are both high, enabling the CPU to handle the game's main simulation thread efficiently. The multi-thread results are equally strong: Cinebench R23 multicore scores 22799, and Geekbench multicore hits 12686. These figures explain why the combo can achieve 179.3 FPS at 1080p Low — the CPU is feeding the GPU enough data to saturate its rendering pipeline.

The CPU's nearest rivals in the database include the Intel Core i7-11850H (0.1% ahead), AMD Ryzen 7 2700X (0.3% behind), AMD Ryzen 5 8400F (0.3% behind), and AMD Ryzen 9 6900HX (0.4% ahead). This tight clustering means the 7500F is perfectly average for its performance class, neither excelling nor lagging behind expectations. Its 82nd percentile ranking among all CPUs confirms this is a solid mid-range choice.

The memory bandwidth of 83.2 GB/s from dual-channel DDR5 support is another factor in the CPU's favor. Fivem's open-world environment constantly streams textures and geometry, and the 7500F's memory subsystem ensures data flows quickly to the GPU. The CPU's PCIe Gen 5 support with 24 lanes provides ample bandwidth for the GTX 1080 Ti, though the card's PCIe 3.0 x16 interface does not fully utilize this capability. Overall, the Ryzen 5 7500F is not the limiting factor in this combo; the GTX 1080 Ti is, particularly at higher resolutions and settings.