Fivem

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3080 combination delivers a strong 1080p and 1440p experience in Fivem, but the data shows it struggles to maintain playable frame rates at 4K with higher settings. The benchmark results indicate a system where the CPU is capable enough to push very high frame rates at lower resolutions, but the GPU becomes the limiting factor as resolution and graphical load increase.

FAQ

Q: Is this combo capable of high refresh rate gaming at 1080p?

A: Yes. The measured data shows an average of 248.8 FPS on Low settings and 159.3 FPS on High settings at 1920x1080, which is well above the threshold for 144Hz displays.

Q: How does the CPU perform in synthetic multi-threaded tests?

A: The Ryzen 5 5600 scores 18,309 points in Cinebench R23 multi-core and 7,689 points in Cinebench R20 multi-core, placing it in the 79th percentile against all CPUs.

Q: What is the GPU's standing relative to other graphics cards?

A: The RTX 3080 is in the 80th percentile of all GPUs, with an average benchmark score of 35,787. Its nearest rival, the AMD Radeon RX 7900 GRE, scores 36,101, which is 0.9% higher.

Q: Can this system handle 4K gaming in Fivem?

A: The data shows it is only viable on Low settings, where it achieves 91.3 FPS. At Ultra settings, the average frame rate drops to 42.5 FPS, which is below the standard 60 FPS target.

Q: What is the performance gap between Low and Ultra settings at 1440p?

A: At 2560x1440, the average frame rate drops from 165 FPS on Low to 79.9 FPS on Ultra, a significant reduction of about 51.6% in performance.

Q: How does the CPU's single-thread performance compare to its multi-thread score?

A: The Ryzen 5 5600 achieves a single-thread score of 2,584 in Cinebench R23, while its multi-core score is 18,309, showing strong scaling across its 6 cores and 12 threads.

GPU Role

The NVIDIA GeForce RTX 3080 is the dominant component in this pairing for Fivem. Its 10 GB of GDDR6X memory on a 320-bit bus provides 760.3 GB/s of bandwidth, which is essential for handling the game's textures and draw distances at higher resolutions. The card's boost clock of 1710 MHz and base clock of 1440 MHz, combined with 8,704 shading units, deliver the raw compute power needed to drive the measured frame rates.

The GPU's role becomes increasingly critical as resolution increases. At 1920x1080, the graphics card is not fully taxed, allowing the CPU to push frame rates to 248.8 FPS on Low settings. However, at 3840x2160, the GPU's workload expands dramatically. The data shows the frame rate at Ultra settings plummets to 42.5 FPS, indicating the RTX 3080 is saturated. The performance scaling from Low to Ultra at 4K is steep: 91.3 FPS to 42.5 FPS, a 53.4% drop, which highlights the card's limitations under extreme pixel counts.

The GPU's benchmark scores corroborate its strong mid-to-high-end positioning. It achieves a Passmark G3D score of 25,086 and a Geekbench OpenCL score of 167,014. Its nearest rival, the AMD Radeon Pro Duo, has an average score of 35,860, which is just 0.2% higher, showing the RTX 3080 is competitive with top-tier hardware from the same era. The 80th percentile ranking confirms that while it is not the absolute fastest, it sits comfortably above the majority of GPUs tested.

CPU Role

The AMD Ryzen 5 5600 provides a solid foundation for this combination. With 6 cores and 12 threads based on the Zen 3 architecture, it offers a base clock of 3.50 GHz and a boost clock of 4.40 GHz. These specifications are well-suited for Fivem, which is a multiplayer mod that often relies on single-thread performance for game logic and physics.

The CPU's benchmark results show it is a capable processor for gaming. Its Cinebench R23 single-core score of 2,584 is strong, and its multi-core score of 18,309 demonstrates good scaling across all threads. In Passmark, it scores 3,256 in single-thread tests and 21,541 in multi-thread tests. These numbers place it in the 79th percentile of all CPUs, with an average benchmark score of 21,765.

The data suggests the CPU is not the primary bottleneck in most scenarios tested. At 1080p with Low settings, the system achieves 248.8 FPS, a figure that is likely near the CPU's maximum output for this game. However, at 4K Ultra, the frame rate drops to 42.5 FPS, which is far below what the CPU can deliver, confirming that the GPU is the limiting factor at higher resolutions. The CPU's performance is sufficient to keep up with the GPU at 1080p and 1440p, as evidenced by the high frame rates at those resolutions.

How This Combo Ranks

In the database of tested combinations, this pairing of the Ryzen 5 5600 and RTX 3080 ranks 559th out of 1,792 combos for Fivem. This places it in the top third of all tested systems, indicating a strong overall performance profile. The rank reflects a balance between the CPU's high multi-threaded capabilities and the GPU's substantial rasterization power.

The ranking suggests that while this combo is not at the very top of the leaderboard, it outperforms a significant majority of other configurations. The CPU's 79th percentile standing and the GPU's 80th percentile standing combine to create a system that is well-matched for high-refresh-rate gaming at 1080p and 1440p. The 559th rank out of 1,792 combos means this setup is ahead of roughly 68.8% of all tested combinations, a solid result for a mid-range CPU paired with a high-end GPU.

Resolution Scaling

The measured FPS data reveals a clear trend: performance degrades significantly as resolution increases, but the rate of degradation varies by settings preset. At Low settings, the average frame rate drops from 248.8 FPS at 1080p to 165 FPS at 1440p, and then to 91.3 FPS at 4K. This represents a 63.3% drop from 1080p to 4K, indicating the GPU is heavily loaded even on Low at high resolutions.

At Ultra settings, the scaling is more dramatic. The system achieves 123.7 FPS at 1080p, but this falls to 79.9 FPS at 1440p and 42.5 FPS at 4K. The percentage drop from 1080p to 4K is 65.6%, which is slightly steeper than at Low settings. This pattern suggests that at 1080p, the CPU is the primary limiter, as the frame rates are very high and the GPU has headroom. As resolution climbs, the GPU becomes the bottleneck, and the frame rates converge toward what the RTX 3080 can physically render.

The data points to a system that is balanced for 1440p gaming. At 2560x1440, the High preset delivers 100.9 FPS, which is excellent for a smooth experience. At 4K, only the Low preset exceeds 60 FPS, making it the only viable option for playable frame rates at that resolution.

Measured FPS Breakdown

The following table summarizes the average FPS for each resolution and settings combination:

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 1920x1080 | Low | 248.8 |

| 1920x1080 | Medium | 196.1 |

| 1920x1080 | High | 159.3 |

| 1920x1080 | Ultra | 123.7 |

| 2560x1440 | Low | 165.0 |

| 2560x1440 | Medium | 126.9 |

| 2560x1440 | High | 100.9 |

| 2560x1440 | Ultra | 79.9 |

| 3840x2160 | Low | 91.3 |

| 3840x2160 | Medium | 72.5 |

| 3840x2160 | High | 55.2 |

| 3840x2160 | Ultra | 42.5 |

At 1080p, the system delivers exceptional performance, with all presets above 120 FPS. The jump from Low to Ultra costs 125.1 FPS, showing the significant impact of graphical settings. At 1440p, the High preset provides a very playable 100.9 FPS, while Ultra still maintains a respectable 79.9 FPS. The 4K results are more challenging; only Low and Medium presets exceed 60 FPS, and High dips to 55.2 FPS, which may be acceptable for some users but is not ideal for competitive play.

Settings Recommendations

For a smooth and visually appealing experience, the data points to the High preset at 2560x1440 as the optimal choice. It delivers 100.9 FPS, which is well above the 60 FPS standard and provides a good balance between visual fidelity and performance. The Ultra preset at 1440p is also viable at 79.9 FPS for those who prioritize image quality over maximum frame rate.

At 1920x1080, the High preset is recommended for most users, as it achieves 159.3 FPS while offering better visuals than Medium. The Ultra preset at 1080p is still very playable at 123.7 FPS and can be used if the display supports it. For users with 4K monitors, the Low preset is the only option that consistently stays above 60 FPS, with an average of 91.3 FPS. The Medium preset at 4K provides 72.5 FPS, which is borderline acceptable, but the High and Ultra presets fall below the 60 FPS threshold. The benchmark results clearly indicate that this combination is best suited for 1080p and 1440p gaming, where it excels across all settings.