Fivem

Fivem is a multiplayer modification platform that stresses both CPU and GPU depending on the active server scripts and the chosen visual settings. This analysis pairs the AMD Ryzen 5 4600G (a 6-core, 12-thread Zen 2 processor) with the NVIDIA GeForce RTX 5060 (an 8 GB GDDR7 card from the Blackwell 2.0 generation). The measured data covers three resolutions (1080p, 1440p, 4K) across four quality presets (Low, Medium, High, Ultra), providing a complete picture of how this combination scales under load. The benchmark results indicate a system that is capable of high refresh rate play at 1080p, but which becomes increasingly GPU-bound at higher resolutions, with the CPU's 8 MB of shared L3 cache and PCIe Gen 3 interface acting as potential long-term bottlenecks in specific scenarios.

FAQ

Q: What is the overall performance rank of this CPU and GPU combination in Fivem?

A: The combination of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5060 ranks 864th out of 1792 tested combos for this game, placing it in the middle of the database. This rank reflects the balance between the CPU's 75th percentile score against all CPUs and the GPU's 73rd percentile score against all GPUs.

Q: How does the RTX 5060 compare to its closest competitors in raw GPU compute benchmarks?

A: The RTX 5060's average benchmark score of 30109 is virtually identical to the AMD Radeon RX 7700 XT, which scores 30097 with a 0% delta. It is also marginally ahead of the NVIDIA Tesla M60 by 0.5% and the RTX 5070 Mobile by 0.6%, while being 0.2% behind the older AMD Radeon RX 570, an unusual grouping that suggests the 5060 sits at a specific performance tier.

Q: Is the Ryzen 5 4600G a strong performer relative to its direct rivals?

A: The data shows the 4600G's average benchmark score of 17489 is essentially neck-and-neck with the AMD Ryzen 3 PRO 5355GE (17482, 0% delta) and the Intel Core i5-12450H (17475, 0.1% delta). It trails the Intel Core i3-14100T by 0.8% and the Core i3-13100F by 1%, indicating that this 2020 processor still holds its own against newer budget and mobile parts.

Q: What is the maximum FPS achievable at 1080p with this setup?

A: The highest measured average FPS is 202.1, achieved at 1920x1080 with the Low preset. This drops to 160.3 on Medium and 122.7 on High, showing a clear progression of performance cost as visual fidelity increases.

Q: Can this system handle 4K gaming in Fivem?

A: At 3840x2160, the average FPS is 73.7 on Low, but this falls to 55.1 on Medium, 45 on High, and a demanding 33.4 on Ultra. The data suggests that 4K is only playable at the Low preset, and even then, the frame rate is below what high-refresh monitors require.

Q: How much does the GPU's memory bandwidth impact 1440p performance?

A: The RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, delivering a bandwidth of 448.0 GB/s. At 2560x1440, the system achieves 133.7 FPS on Low and 85.1 FPS on High, indicating that the memory subsystem is sufficient for these frame rates, though the 8 GB capacity may limit texture quality in heavily modded servers.

GPU Role

The NVIDIA GeForce RTX 5060 is the primary driver of Fivem's visual output, and its specifications directly determine the scaling of frame rates across settings. The GPU's base clock is set at 2280 MHz, boosting up to 2497 MHz, with memory running at 1750 MHz (28 Gbps effective). These clocks, combined with 3840 shading units and 120 texture mapping units, produce a texture rate of 299.6 GTexel/s and a pixel rate of 119.9 GPixel/s, which are the raw throughput figures that govern how quickly the card can fill frames at high resolutions.

The 8 GB GDDR7 memory pool, connected via a 128-bit bus for 448.0 GB/s bandwidth, is a critical factor. In Fivem, where user-generated content and high-resolution texture packs are common, this capacity can become a limiting factor at 4K Ultra settings, where the measured FPS drops to 33.4. The GPU's 30 RT cores and 120 Tensor cores are present, but Fivem's legacy rendering pipeline does not heavily leverage ray tracing or DLSS, meaning the card's rasterization performance—its FP32 throughput of 19.18 TFLOPS—is what matters most. The GPU's 73rd percentile ranking against all GPUs, with an average benchmark score of 30109, places it in the same performance class as the RX 7700 XT, confirming it is a solid mid-range part.

The relationship between the GPU and the Ryzen 5 4600G is also defined by the PCIe interface. The RTX 5060 uses a PCIe 5.0 x8 connection, but the 4600G only supports PCIe Gen 3 with 20 lanes. This means the GPU will run at PCIe 3.0 x8 speeds, which can theoretically reduce data transfer rates between the CPU and GPU. In practice, the benchmark results show this does not cripple performance at 1080p, where the system still hits 202.1 FPS on Low, but it may contribute to the CPU bottleneck observed at lower resolutions.

Settings Recommendations

The measured FPS data provides a clear hierarchy for optimal playability. For competitive or high-refresh-rate gaming at 1920x1080, the Low preset delivers 202.1 FPS, which is ideal for a 144Hz or 165Hz monitor. However, the Medium preset at 160.3 FPS still offers excellent smoothness while likely improving visual fidelity over Low. The High preset at 122.7 FPS is also viable for 120Hz displays, but it represents a significant 23% drop from Medium, suggesting that the jump to High is costly for the GPU.

At 2560x1440, the Low preset again leads with 133.7 FPS, which is playable on high-refresh monitors, but dropping to Medium reduces the average to 101.7 FPS, which is still smooth for most users. The High preset at 85.1 FPS is acceptable for 60-75Hz displays, but it is a 16% drop from Medium, indicating that users should prefer Medium for a balance of quality and speed. The Ultra preset at 66.5 FPS is playable but not ideal for fast-paced multiplayer scenarios.

For 3840x2160, the recommendations become stricter. The Low preset at 73.7 FPS is the only setting that approaches playable frame rates, while Medium at 55.1 FPS and High at 45 FPS are below the 60 FPS threshold for smooth gameplay. Ultra at 33.4 FPS is effectively a slideshow and should be avoided. The data shows that for this CPU-GPU combo, the best experience across all resolutions is achieved by using the Low or Medium presets, with High reserved for 1080p users who prioritize visuals over frame rate.

Measured FPS Breakdown

At 1920x1080, the performance envelope is wide. The Low preset yields an average of 202.1 FPS, which is the highest measured result across the entire test matrix. Moving to Medium, the average drops to 160.3 FPS, a decrease of approximately 21%. High settings produce 122.7 FPS, and Ultra brings the average down to 97.9 FPS. This progression shows a 104.2 FPS difference between Low and Ultra, demonstrating that the RTX 5060 is the scaling factor, but the CPU allows for very high ceilings at lower settings.

At 2560x1440, the results scale down proportionally. Low settings average 133.7 FPS, Medium drops to 101.7 FPS, High reaches 85.1 FPS, and Ultra falls to 66.5 FPS. The delta between Low and Ultra is 67.2 FPS, which is a smaller absolute difference than at 1080p, but the percentage drop from Low to Ultra is roughly 50%, similar to the 1080p result. This indicates that the GPU is becoming more of a limiting factor as pixel count increases.

At 3840x2160, the performance takes a significant hit. Low settings average 73.7 FPS, Medium drops to 55.1 FPS, High falls to 45 FPS, and Ultra bottoms out at 33.4 FPS. The gap between Low and Ultra is 40.3 FPS, and the percentage drop is about 55%, which is the steepest decline among all resolutions. This trend confirms that 4K is heavily GPU-bound, with the RTX 5060's 8 GB memory and 128-bit bus struggling to maintain frame rates.

Resolution Scaling

The FPS drop from 1080p to 4K is stark and informative. At Low settings, the average FPS falls from 202.1 at 1080p to 133.7 at 1440p (a 34% reduction) and then to 73.7 at 4K (a 64% reduction from 1080p). This scaling pattern is consistent across all presets, with the percentage loss from 1080p to 4K being approximately 60-65% for Medium, High, and Ultra settings. For example, Ultra drops from 97.9 FPS at 1080p to 33.4 FPS at 4K, a 66% reduction.

This data suggests that the limiting component shifts with resolution. At 1080p, the Ryzen 5 4600G's single-thread performance (3dmark_single_thread score of 726) and 8 MB L3 cache are more likely to constrain the frame rate, as the GPU has headroom to render frames quickly. The fact that Low settings at 1080p exceed 200 FPS indicates that the GPU is not the bottleneck. However, as resolution increases to 4K, the GPU's raw fill rate and memory bandwidth become the primary constraint, as evidenced by the steep drop-off in FPS. The 4K Ultra result of 33.4 FPS is below playable thresholds, confirming that this combo is best suited for 1080p and 1440p gaming, with 4K reserved for Low settings only. The data indicates a balanced system at 1440p, where both components are sufficiently loaded, but at 1080p, the CPU is the ceiling, and at 4K, the GPU is the ceiling.