Fivem

FAQ

Q: What is the measured performance of the AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5060 combo in Fivem?

A: The combo achieves its highest average of 202.5 FPS at 1920x1080 on Low settings, while the most demanding configuration, 3840x2160 on Ultra, yields 32.5 FPS. The data covers 12 measured scenarios across four resolutions and four quality presets.

Q: How does the Ryzen 5 3600 compare to its nearest CPU rivals?

A: The Ryzen 5 3600 has an avgBenchmarkScore of 18129, placing it within 0.3% of the Intel Core i5-11400 (18150, deltaPct -0.1%) and the AMD EPYC 9274F (18189, deltaPct -0.3%). It sits slightly above the AMD Ryzen 5 7535HS (18101, deltaPct 0.2%) and the AMD Ryzen 5 1600 (18158, deltaPct -0.2%).

Q: What is the GPU's benchmark standing relative to its nearest rivals?

A: The RTX 5060 scores an avgBenchmarkScore of 30109, which is statistically tied with the AMD Radeon RX 7700 XT (30097, deltaPct 0%) and within 0.6% of the NVIDIA GeForce RTX 5070 Mobile (29928, deltaPct 0.6%). It also sits near the AMD Radeon RX 570 (30158, deltaPct -0.2%) and NVIDIA Tesla M60 (29969, deltaPct 0.5%).

Q: How many cores and threads does the CPU have, and what are its clock speeds?

A: The AMD Ryzen 5 3600 has 6 cores and 12 threads, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. It features 32 MB of shared L3 cache and supports dual-channel DDR4 memory with 51.2 GB/s bandwidth.

Q: What are the GPU's memory specifications and core clocks?

A: The RTX 5060 has 8 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth. Its base clock is 2280 MHz, boost clock is 2497 MHz, and memory runs at 1750 MHz (28 Gbps effective). The GPU includes 3840 shading units, 120 TMUs, and 48 ROPs.

Q: What is the combo's rank among all tested configurations in Fivem?

A: This combo ranks 895 out of 1792 tested combos in Fivem, placing it in the middle of the database. The dataIsMeasured field confirms these are measured results, not estimates.

Settings Recommendations

The measured FPS data shows a clear pattern: for the best balance of visual quality and smooth gameplay, the Medium preset is the sweet spot. At 1920x1080, Medium delivers 160.2 FPS average, which is 37.7 FPS higher than High (125.5 FPS) and only 42.3 FPS below Low (202.5 FPS). The jump from Medium to High costs 34.7 FPS at 1080p, while the visual difference between these presets is typically less dramatic than the frame rate gap.

At 2560x1440, Medium maintains a playable 102.6 FPS average, comfortably above the 60 FPS threshold. High at this resolution drops to 83.5 FPS, and Ultra falls to 65.8 FPS. For 1440p users, Medium provides the headroom needed for consistent performance, especially in multiplayer scenarios where Fivem's simulation load can spike.

At 3840x2160, no preset achieves 60 FPS. Medium manages 58.9 FPS, which is borderline, while High drops to 42.4 FPS and Ultra falls to 32.5 FPS. For 4K, Low is the only preset that breaks 60 FPS, hitting 71.4 FPS. Given that Fivem is a multiplayer title where frame consistency matters, 4K users should accept Low settings or consider a lower resolution.

The data indicates that Ultra presets are disproportionately expensive: at 1080p, Ultra (97.7 FPS) is 62.5 FPS slower than Medium (160.2 FPS), yet the visual uplift from Medium to Ultra is often marginal in real gameplay. For most users, Medium at 1080p or 1440p delivers the best combination of smoothness and fidelity. If competitive play is the priority, Low at 1080p (202.5 FPS) provides maximum responsiveness.

CPU Role

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture (Matisse), built on TSMC's 7 nm process. It operates at 3.60 GHz base and 4.20 GHz boost, with 32 MB of shared L3 cache. In Fivem, a multiplayer modification that inherits Grand Theft Auto V's engine, CPU performance is critical because the game world simulation and networked entity updates are heavily single-threaded, though modern Fivem servers can utilize multiple threads.

The CPU's benchmark results indicate balanced performance: Cinebench R23 multicore scores 15045, while single-core scores 2124. The 3DMark single-thread score is 696, and 2-thread score is 1361, showing scaling across two cores. The 4-thread score (2579) and 8-thread score (3844) demonstrate that the 6-core/12-thread configuration handles moderate thread counts efficiently, which suits Fivem's hybrid workload of physics, scripting, and rendering tasks.

The CPU's percentileVsAllCpus of 76 means it outperforms 76% of all CPUs in the database. Its nearest rival, the Intel Core i5-11400, is effectively identical in avgScore (18150 vs 18129, deltaPct -0.1%). This places the Ryzen 5 3600 in a competitive position for Fivem, where the game's single-thread sensitivity means the 4.20 GHz boost clock is more relevant than raw core count.

The memory bandwidth of 51.2 GB/s on dual-channel DDR4 is adequate for Fivem's data streaming. The CPU's PCIe Gen 4 support (16 lanes) is sufficient for the RTX 5060's PCIe 5.0 x8 interface, though the GPU will run at Gen 4 speeds. In practice, this doesn't bottleneck Fivem, as the game's asset streaming is more dependent on storage and memory latency than bus bandwidth.

How This Combo Ranks

The combo ranks 895 out of 1792 tested combos in Fivem, placing it in the 50th percentile of all configurations in the database. This mid-pack ranking reflects a balanced pairing: the Ryzen 5 3600 (76th percentile among CPUs) and RTX 5060 (73rd percentile among GPUs) both sit slightly above average, but the combination doesn't break into the upper echelon.

The rank suggests that this system will handle Fivem at mainstream settings but won't dominate at high resolutions. At 1080p Medium, the combo achieves 160.2 FPS, which is strong for most multiplayer scenarios. However, the 895th rank out of 1792 indicates that many combos with newer CPUs or higher-tier GPUs will outperform it, particularly at 4K where the GPU becomes the limiting factor.

The GPU's nearest rival, the AMD Radeon RX 7700 XT, has an identical avgBenchmarkScore (30097 vs 30109, deltaPct 0%), suggesting that swapping to that GPU would yield similar Fivem performance. The CPU's closest competitor, the Intel Core i5-11400, is also a near-exact match. This means the combo's mid-pack rank is not due to a weak pairing but rather the natural position of two mid-range components.

For context, the combo's 1080p Low result (202.5 FPS) is 105 FPS higher than the 4K Ultra result (32.5 FPS), showing how resolution scaling affects the overall ranking. Users targeting 1080p will find this combo more than adequate, while 4K users will need to accept Low settings or upgrade.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with the GB206 chip, fabricated on TSMC's 5 nm process. It features 8 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth, which is a moderate capacity for modern games but sufficient for Fivem's textures at 1080p and 1440p.

The GPU's clock speeds are 2280 MHz base and 2497 MHz boost, with memory at 1750 MHz (28 Gbps effective). It has 3840 shading units, 120 TMUs, and 48 ROPs, delivering 19.18 TFLOPS of FP32 performance. The pixel rate is 119.9 GPixel/s and texture rate is 299.6 GTexel/s.

In Fivem, the GPU's role becomes dominant at higher resolutions. At 4K, the RTX 5060's 8 GB VRAM and 128-bit bus are limiting factors, as evidenced by the 4K Medium result of 58.9 FPS versus 1440p Medium at 102.6 FPS. The 448.0 GB/s bandwidth is adequate for 1080p but struggles with 4K texture streaming.

The GPU's benchmark scores show strong DirectX 11 performance (Passmark DX11 score of 200) but weaker DirectX 12 (score of 77), which is relevant since Fivem primarily uses DirectX 11. The OpenCL score of 120785 and Vulkan score of 116626 indicate compute headroom, but Fivem doesn't heavily utilize these APIs.

The RTX 5060's percentileVsAllGpus of 73 places it above the median. Its nearest rival, the RX 7700 XT, is a statistical tie, meaning users should expect similar Fivem frame rates from either card. The GPU's 145 W TDP and 300 W suggested PSU make it efficient, but the 8 GB VRAM is the primary constraint for 4K gaming.

Measured FPS Breakdown

1920x1080: Low settings produce 202.5 FPS average, the highest measured result across all configurations. Medium drops to 160.2 FPS, a 42.3 FPS decrease. High yields 125.5 FPS, and Ultra falls to 97.7 FPS. The spread from Low to Ultra is 104.8 FPS, showing significant scaling with quality presets.

2560x1440: Low achieves 128.6 FPS average, which is 73.9 FPS lower than 1080p Low. Medium maintains 102.6 FPS, a 57.6 FPS drop from 1080p Medium. High results in 83.5 FPS, and Ultra produces 65.8 FPS. The resolution increase from 1080p to 1440p costs roughly 36-38% performance across all settings.

3840x2160: Low delivers 71.4 FPS average, just above the 60 FPS threshold. Medium drops to 58.9 FPS, which is borderline for smooth gameplay. High yields 42.4 FPS, and Ultra falls to 32.5 FPS. The jump from 1440p to 4K is severe: Medium loses 43.7 FPS, and High loses 41.1 FPS.

The data shows that the combo is best suited for 1080p and 1440p gaming. At 1080p, even Ultra (97.7 FPS) stays above 60 FPS, making this resolution the safest choice for consistent performance. At 1440p, Medium (102.6 FPS) is the recommended preset, while Ultra (65.8 FPS) is playable but leaves little headroom. At 4K, only Low (71.4 FPS) is viable, and users seeking higher quality should consider lowering resolution or upgrading the GPU.