Fivem
This combination provides smooth gameplay with an average of 71 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 35 | 44 | 52 |
| 1440p QHD | 48 | 60 | 76 | 96 |
| 1080p Full HD | 71 | 89 | 117 | 144 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fivem with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 2060, In-Depth Analysis
Resolution Scaling
The measured FPS data for Fivem reveals a pronounced sensitivity to resolution changes with this AMD Ryzen 5 2600 + NVIDIA GeForce RTX 2060 combination. Moving from 1920x1080 to 2560x1440 at High settings, the average frame rate drops from 89.3 FPS to exactly 60 FPS, a substantial 33% reduction. The scaling continues at 3840x2160, where the same High preset yields only 35.1 FPS, representing a further 41% decline from the 1440p figure. This pattern strongly indicates that at 1080p, the system is likely balanced, but as resolution climbs, the RTX 2060's 6 GB GDDR6 memory and 192-bit bus become the primary constraint.
The gap between Low and Ultra settings widens significantly at higher resolutions. At 1080p, the difference between Low (143.8 FPS) and Ultra (71.1 FPS) is 72.7 FPS. At 4K, that gap narrows to just 27.1 FPS (51.8 FPS on Low versus 24.7 FPS on Ultra). This compression of the settings range at 4K is a classic symptom of GPU-bound operation; the graphics card is saturated regardless of the quality preset, so lowering settings yields diminishing returns. Conversely, at 1080p the large spread between presets suggests the CPU, with its 6 cores and 12 threads, can still feed frames quickly enough to let the GPU differences show.
Interestingly, the RTX 2060's performance ceiling appears to be hit around 143.8 FPS at 1080p Low. This figure is close to what many would consider a high-refresh-rate threshold, yet it is not exceptionally high, hinting that the Ryzen 5 2600's Zen architecture and 16 MB shared L3 cache may be holding back the GPU in lighter scenes. The data cannot isolate this definitively, but the fact that 1440p Low (96.3 FPS) is only 33% slower than 1080p Low, while 1080p High (89.3 FPS) is already below that, suggests that geometric and draw-call complexity in Fivem's multiplayer environments scales heavily with CPU load, not just pixel count.
How This Combo Ranks
This specific pairing sits in the 1450th position out of 1792 tested combinations for Fivem, placing it in the lower third of all systems benchmarked. The percentile rank of the CPU itself is 77th percentile compared to all processors, while the GPU sits at the 58th percentile versus all graphics cards. This mismatch — a relatively strong CPU paired with a mid-tier GPU — explains the ranking. The combo's overall position in the 1450-1792 range suggests that while the CPU is capable, the GPU's absolute performance, as reflected in its average benchmark score of 16074, drags the system down in a game that appears to favor graphics throughput.
Looking at the nearest rivals for the CPU, the Ryzen 5 2600's average benchmark score of 19616 is nearly identical to the Intel Core i5-1345U (19691, deltaPct -0.4%) and the AMD Ryzen 5 7530U (19508, deltaPct 0.6%). This means the CPU is not a weak link; it is competitive with much newer mobile silicon. However, the GPU's nearest rivals, such as the AMD Radeon RX 7600S (15996, deltaPct 0.5%) and AMD Radeon Pro 5600M (16351, deltaPct -1.7%), show that the RTX 2060 is statistically indistinguishable from these other mid-range options. The combination of a 77th-percentile CPU with a 58th-percentile GPU results in a system that ranks poorly among the 1792 combos because many tested configurations likely pair higher-end GPUs with similar or better CPUs.
The rank of 1450 out of 1792 means roughly 81% of tested combos outperform this one in Fivem. This is not a reflection of a broken setup but rather a consequence of the GPU's age (released January 2019) and the game's tendency to scale with graphics hardware. The data suggests that users with this combo will need to make peace with 1080p gaming if they want high refresh rates, as the 4K Ultra result of 24.7 FPS is simply not competitive.
Settings Recommendations
Based on the measured frame rates, the optimal experience for this Ryzen 5 2600 + RTX 2060 combo is the Medium preset at 1920x1080. This yields 116.6 FPS, which is a 27.3 FPS improvement over High settings (89.3 FPS) while only sacrificing visual quality that is often imperceptible during fast-paced Fivem multiplayer action. The jump from Medium to Low at 1080p does provide a further boost to 143.8 FPS, but that 27.2 FPS gain comes with noticeable visual degradation; for most players, Medium offers the best balance between fluidity and fidelity.
At 2560x1440, the Medium preset delivers 75.7 FPS, which is playable but not ideal for competitive play. High at 1440p drops to exactly 60 FPS, which is acceptable for casual sessions but leaves no headroom for frame drops in busy city areas. For 1440p users, Medium is the recommended choice, as it stays above the 60 FPS threshold with a comfortable margin. The Ultra preset at 1440p (48.3 FPS) is too demanding for this hardware, as is any preset at 3840x2160, where even Low only manages 51.8 FPS.
For players with a 4K monitor, the data suggests avoiding this resolution entirely. The best 4K result is Low at 51.8 FPS, which is below the 60 FPS target and will feel stuttery in action. Given that 1080p Medium offers more than double the frame rate of 4K Medium (43.6 FPS), the sensible recommendation is to prioritize resolution scaling down to 1080p or 1440p rather than chasing 4K with this hardware.
Measured FPS Breakdown
At 1920x1080, the full range of settings produces a wide spread of results. Low settings yield 143.8 FPS, Medium drops to 116.6 FPS, High manages 89.3 FPS, and Ultra falls to 71.1 FPS. The step from Low to Medium is a 27.2 FPS loss (18.9% reduction), while Medium to High costs another 27.3 FPS (23.4% reduction). High to Ultra is a gentler 18.2 FPS decline (20.4% reduction). These numbers indicate that the RTX 2060 is sensitive to the quality presets at 1080p, with each tier having a meaningful impact on frame rate.
At 2560x1440, the pattern continues but with lower absolute values. Low produces 96.3 FPS, which is the only preset at this resolution that exceeds 90 FPS. Medium delivers 75.7 FPS, High hits exactly 60 FPS, and Ultra drops to 48.3 FPS. The relative penalties are similar to 1080p, but the absolute losses are smaller because the GPU is already working harder. For example, the Low-to-Medium gap at 1440p is 20.6 FPS, compared to 27.2 FPS at 1080p.
At 3840x2160, the results are uniformly low. Low settings produce 51.8 FPS, Medium drops to 43.6 FPS, High falls to 35.1 FPS, and Ultra bottoms out at 24.7 FPS. The difference between Low and Ultra at 4K is only 27.1 FPS, which is less than the difference between Low and Medium at 1080p alone. This demonstrates that the GPU is the dominant bottleneck at 4K, and no amount of settings reduction can bring the frame rate to a smooth 60 FPS.
FAQ
Q: Can this combo run Fivem at 4K 60 FPS?
A: No. The best 4K result is 51.8 FPS on Low settings, and Ultra drops to 24.7 FPS. All 4K presets fall well below the 60 FPS target.
Q: What is the highest frame rate achievable with this hardware?
A: The maximum measured average is 143.8 FPS, achieved at 1920x1080 with Low settings. This is the only tested configuration that exceeds 140 FPS.
Q: Is the CPU or GPU the limiting factor at 1080p?
A: The data suggests a balance at 1080p. The CPU ranks in the 77th percentile, and the large spread between Low (143.8 FPS) and Ultra (71.1 FPS) indicates the GPU can still be taxed by quality presets, but the CPU's Zen architecture prevents higher frame rates beyond 143.8 FPS.
Q: How does this combo compare to other tested systems in Fivem?
A: It ranks 1450th out of 1792 combinations, meaning about 81% of tested systems perform better. This is despite the CPU being competitive with rivals like the Intel Core i5-1345U (deltaPct -0.4%).
Q: What settings should I use for a smooth 1440p experience?
A: Medium settings at 2560x1440 produce 75.7 FPS, which is the best balance above 60 FPS. High settings drop to exactly 60 FPS, leaving no margin for frame dips.
Q: Is the RTX 2060's 6 GB VRAM sufficient for Fivem?
A: The measured results do not show a hard VRAM cap, but the GPU's absolute performance (58th percentile, average score 16074) is the primary constraint at 4K, where even Low only reaches 51.8 FPS.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 2060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 2060 in Fivem
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 51.8 |
| 3840x2160 | Medium | 43.6 |
| 3840x2160 | High | 35.1 |
| 3840x2160 | Ultra | 24.7 |
| 2560x1440 | Low | 96.3 |
| 2560x1440 | Medium | 75.7 |
| 2560x1440 | High | 60.0 |
| 2560x1440 | Ultra | 48.3 |
| 1920x1080 | Low | 143.8 |
| 1920x1080 | Medium | 116.6 |
| 1920x1080 | High | 89.3 |
| 1920x1080 | Ultra | 71.1 |
Fivem with Ryzen 5 2600 + Other GPUs
See how Fivem performs with the same CPU but different graphics cards.
Fivem with RTX 2060 + Other CPUs
See how Fivem performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 2060
Explore FPS benchmarks for other games using this same hardware combination.