Fivem

The AMD Ryzen 5 2600 paired with the AMD Radeon RX 9070 XT ranks 587th out of 1792 tested combos in Fivem. This places the combination in the 67th percentile of all tested configurations, indicating a solidly above-average result for this multiplayer title. The pairing leverages a high-end GPU with a mid-range previous-generation CPU, and the data shows that this combination produces playable frame rates across most settings and resolutions, though the CPU becomes a clear limiting factor at lower resolutions.

How This Combo Ranks

The combo rank of 587 out of 1792 tested combos puts this configuration in the upper third of all results for Fivem. This is a strong showing, driven almost entirely by the GPU's raw performance, as the CPU is a generation old and sits well below the top processors in the database. The rank indicates that this pairing delivers a competitive experience for the vast majority of players, though it is not among the elite configurations that dominate the top of the charts.

The CPU's percentile ranking of 77rd among all CPUs and the GPU's percentile ranking of 82nd among all GPUs suggest that the graphics card is the stronger component in this pairing. The data reflects this: at higher resolutions the GPU carries the load, while at 1080p the CPU's limitations become more apparent. The combination outperforms many systems with newer mid-range CPUs because the RX 9070 XT's massive compute advantage compensates for the older processor's lower per-core performance. The result is a balanced system in terms of overall ranking, but one where the bottleneck shifts depending on the resolution and preset.

GPU Role

The AMD Radeon RX 9070 XT features 16 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 644.6 GB/s. This is a substantial amount of video memory for a multiplayer game like Fivem, which typically does not require high VRAM capacity even at 4K. The GPU's memory clock runs at 2518 MHz, with an effective data rate of 20.1 Gbps, and the base clock is 1660 MHz with a boost clock of 2970 MHz. The game clock is rated at 2400 MHz, which represents the sustained clock speed expected during typical gaming loads.

The GPU's 4096 shading units and 128 ROPs deliver a pixel rate of 380.2 GPixel/s and a texture rate of 760.3 GTexel/s. These specifications translate to raw fill-rate capabilities that far exceed what Fivem demands at any settings preset. Benchmark results show the GPU scoring 26795 in Passmark G3D and 7260 in 3DMark Steel Nomad DX12, placing it in the 82nd percentile of all GPUs. The data shows that the RX 9070 XT is not the limiting factor in this pairing at any resolution tested, as frame rates scale consistently with resolution changes. The GPU's 16 GB VRAM ensures that even the Ultra preset at 4K does not encounter memory capacity issues.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound performance at higher resolutions and CPU-bound performance at 1080p. At 4K Ultra, the system averages 48.7 FPS, which scales to 61.2 FPS at High, 72.2 FPS at Medium, and 97.1 FPS at Low. This progression shows a 99% increase from Ultra to Low at 4K, indicating that the GPU is heavily loaded and that reducing graphical settings provides substantial gains.

At 1440p, the scaling is similar but the absolute numbers are higher: Ultra averages 85.3 FPS, High 107.9 FPS, Medium 133.2 FPS, and Low 170.5 FPS. The jump from 4K Ultra to 1440p Ultra is 75% higher, demonstrating that resolution is a primary factor in performance. At 1080p, the scaling compresses dramatically: Low averages 197.6 FPS, Medium 180.2 FPS, High 164.8 FPS, and Ultra 124.2 FPS. The gap between Low and Ultra at 1080p is only 59%, compared to 99% at 4K. This compression indicates that the CPU begins to limit performance at 1080p, especially at lower settings where the GPU could otherwise render more frames. The data shows that the transition from 4K to 1440p yields a 75% improvement in Ultra preset FPS, while the transition from 1440p to 1080p yields only a 46% improvement, confirming that the CPU is the bottleneck at the lowest resolution.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. The Low preset averages 197.6 FPS, which is the highest measured result across all configurations. Medium averages 180.2 FPS, High averages 164.8 FPS, and Ultra drops to 124.2 FPS. These numbers show that even at Ultra settings, the system stays well above 120 FPS, making it suitable for high-refresh-rate displays. The difference between Low and Ultra at 1080p is 73.4 FPS, a significant range that gives players flexibility.

At 2560x1440, the Low preset averages 170.5 FPS, Medium 133.2 FPS, High 107.9 FPS, and Ultra 85.3 FPS. These results indicate that 1440p High is the sweet spot for a 100+ FPS experience, while Ultra remains playable above 85 FPS. The drop from Low to Ultra at 1440p is 85.2 FPS, showing that the GPU scaling is more pronounced at this resolution than at 1080p.

At 3840x2160, the Low preset averages 97.1 FPS, Medium 72.2 FPS, High 61.2 FPS, and Ultra 48.7 FPS. This is the only resolution where the system falls below 60 FPS on the Ultra preset, and even High settings hover just above 60 FPS. The data shows that 4K gaming is possible with this combo, but only at Low or Medium settings for a smooth experience. The scaling from Low to Ultra at 4K is 48.4 FPS, indicating that the GPU is the primary bottleneck at this resolution.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. It belongs to the Zen+ architecture, built on a 12 nm process at GlobalFoundries, and supports DDR4 memory with a dual-channel bus. The CPU has 16 MB of shared L3 cache and a memory bandwidth of 46.9 GB/s. Its Passmark single-thread score is 2239, and its multithread score is 13160, with a Cinebench R23 multi-core score of 11186.

The CPU's percentile ranking of 77rd places it above average, but its single-thread performance is modest by modern standards. In Fivem, which is a multiplayer modification of Grand Theft Auto V, the game engine relies heavily on CPU performance for physics, AI, and network code. The data shows that at 1080p Low, the system averages 197.6 FPS, but at 1080p Ultra it drops to 124.2 FPS, a 37% decrease. This drop is larger than the GPU scaling alone would suggest, indicating that the CPU's limited single-thread performance becomes a constraint as the game's draw calls increase with higher settings. The CPU's boost clock of 3.90 GHz is modest, and the data shows that this processor prevents the RX 9070 XT from reaching its full potential at 1080p. At higher resolutions, the CPU overhead is smaller relative to the GPU workload, allowing the system to scale more predictably.

Settings Recommendations

For 1080p gaming, the data shows that the Ultra preset is the best choice for visual quality while still maintaining an average of 124.2 FPS, which is well above the 60 FPS threshold and suitable for competitive play. The High preset at 164.8 FPS offers a 33% performance increase over Ultra with minimal visual degradation, making it the recommended choice for players who prefer smoother motion. The Low preset at 197.6 FPS is only recommended for extreme competitive scenarios where maximum frame rate is the sole priority.

At 1440p, the High preset averages 107.9 FPS, which is the best balance of visual fidelity and performance. The Medium preset at 133.2 FPS provides a 23% boost over High and is a viable alternative for players with 144 Hz displays. The Ultra preset at 85.3 FPS remains playable but starts to show the GPU's limits. For 4K gaming, the Low preset at 97.1 FPS is the only configuration that maintains a smooth experience above 90 FPS. The Medium preset at 72.2 FPS is acceptable for slower-paced gameplay, while High at 61.2 FPS is borderline and Ultra at 48.7 FPS is not recommended for smooth play. The data suggests that players should prioritize resolution over settings: 1440p High provides a better experience than 4K Low in terms of visual quality and frame rate consistency.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Fivem?

A: The data shows that 1440p High provides the best balance, averaging 107.9 FPS. This gives a smooth experience above 100 FPS while retaining high visual quality. 1080p Ultra also works well at 124.2 FPS, but 1440p uses the GPU more effectively.

Q: Can this system handle 4K gaming in Fivem?

A: Yes, but only at lower settings. The Low preset averages 97.1 FPS at 4K, while Medium averages 72.2 FPS. The High preset at 61.2 FPS is playable, but Ultra drops to 48.7 FPS, which is below the ideal smoothness threshold.

Q: Which component limits performance at 1080p?

A: The CPU is the limiting factor at 1080p. The Ryzen 5 2600's single-thread score of 2239 and boost clock of 3.90 GHz prevent the GPU from reaching its full potential, as shown by the compressed scaling between Low (197.6 FPS) and Ultra (124.2 FPS) at this resolution.

Q: How does the RX 9070 XT compare to its nearest rivals?

A: The RX 9070 XT has an average benchmark score of 39647, which is 0.1% lower than the AMD Radeon Pro 575 (39703) and 0.2% higher than the NVIDIA RTX A500 Mobile (39568). It sits in the 82nd percentile of all GPUs.

Q: Is the Ryzen 5 2600 a bottleneck for the RX 9070 XT?

A: The data indicates that the CPU becomes a bottleneck at 1080p, especially at lower settings. At 4K, the GPU dominates the workload, and the system scales more predictably. At 1440p, the balance is more even, with the CPU limiting performance less than at 1080p.

Q: What settings preset gives the highest frame rate?

A: The Low preset at 1080p gives the highest average frame rate at 197.6 FPS. This is the maximum measured result across all resolutions and settings. The Medium preset at 1080p follows at 180.2 FPS.