Evolve

Resolution Scaling

The measured FPS data for Evolve shows a steep, consistent performance curve as resolution climbs from 1920x1080 to 3840x2160, with the RTX 2060 clearly becoming the limiting factor at higher pixel counts. At 1080p Low settings, the combo produces 148.2 FPS, but dropping to 1440p Low reduces that to 96.8 FPS, and 4K Low yields 55.4 FPS. This represents a 62.6% performance loss from 1080p to 4K at Low settings, which is a typical pattern for a mid-range GPU where pixel throughput becomes the dominant constraint.

The scaling pattern becomes more dramatic at higher quality presets. At Ultra settings, the frame rate falls from 61.3 FPS at 1080p to 42.4 FPS at 1440p, then to 25.5 FPS at 4K — a cumulative 58.4% reduction. High settings show similar behavior: 87.8 FPS at 1080p, 58.6 FPS at 1440p, and 31.7 FPS at 4K. The fact that 4K Ultra lands below 30 FPS confirms that this resolution/preset combination is not viable for smooth gameplay, while 4K High at 31.7 FPS is borderline at best.

What this scaling reveals about the limiting component is instructive. The gap between Low and Ultra at 1080p is 86.9 FPS (148.2 vs. 61.3), which demonstrates that the GPU is heavily engaged even at lower resolutions. The Ryzen 5 2600, with its 6 cores and 12 threads, has enough headroom to feed the RTX 2060 at 1080p, as evidenced by the high frame rates at Low settings. However, the fact that 1080p Ultra still achieves 61.3 FPS suggests the CPU is not the primary bottleneck even in the most demanding preset at that resolution — the GPU's 6 GB of GDDR6 memory and 192-bit bus width become the constraining factor as texture and shader complexity increases.

FAQ

Q: Can this combo run Evolve at 4K smoothly?

A: Only at Low settings, where it achieves 55.4 FPS. Medium dips to 40.5 FPS, High to 31.7 FPS, and Ultra falls to 25.5 FPS, which is below the generally accepted threshold for smooth play.

Q: What is the best resolution for this combination?

A: 1080p is clearly the sweet spot. All four presets exceed 60 FPS there, with Low hitting 148.2 FPS and Medium at 113.4 FPS. At 1440p, only Low (96.8 FPS) and Medium (75.5 FPS) remain comfortably above 60 FPS.

Q: How does the Ryzen 5 2600's 6-core/12-thread configuration affect performance in Evolve?

A: The CPU's multi-threaded capability appears sufficient for this title. The PassMark multithread score of 13160 and Cinebench R23 multicore score of 11186 indicate solid parallel processing power, and the measured frame rates at 1080p suggest no CPU-induced ceiling.

Q: Is the RTX 2060's 6 GB VRAM enough for Evolve at high settings?

A: Based on the measured results, yes at 1080p and 1440p. The High preset delivers 87.8 FPS at 1080p and 58.6 FPS at 1440p. At 4K, the VRAM capacity and memory bandwidth (336.0 GB/s) appear insufficient for Ultra settings, given the 25.5 FPS result.

Q: What FPS can players expect at 1440p with Medium settings?

A: 75.5 FPS average. This is the highest preset that remains comfortably playable at 1440p, with High dropping to 58.6 FPS and Ultra to 42.4 FPS.

Q: How does this combo rank among all tested configurations for Evolve?

A: It ranks 1409 out of 1695 tested combos, placing it in the lower portion of the field. This reflects the age of both components relative to the broader test pool.

How This Combo Ranks

The AMD Ryzen 5 2600 + NVIDIA GeForce RTX 2060 combination ranks 1409 out of 1695 tested combos in Evolve, placing it in the bottom 17% of all configurations. This low ranking is somewhat surprising given the playable frame rates measured at 1080p, but it reflects the fact that the benchmark database includes many newer, higher-end pairings that push far beyond this combo's capabilities.

The CPU's percentile position of 77 out of 100 against all processors shows it outperforms the majority of CPUs in general compute tasks, yet its nearest rivals in average benchmark score include the Intel Core i5-1345U (0.4% higher score), the AMD Ryzen 5 7530U (0.6% lower), and the Intel Core i7-10700F (0.7% higher). These are all modern processors with similar or better multi-threaded performance, but none of them are paired with GPUs in the 2060's class in this game's results.

The GPU's percentile of 58 against all GPUs places it just above the median, with its nearest rivals being the AMD Radeon RX 7600S (0.5% higher score) and the AMD Radeon Pro W5500 (1.8% lower). This mid-pack GPU positioning, combined with a CPU that is now several generations old, explains the overall low combo rank. The measured data suggests that while this pairing delivers acceptable 1080p performance in Evolve, it simply cannot compete with the high-end configurations that dominate the top of the rankings.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results across all presets. Low settings produce 148.2 FPS, which drops to 113.4 FPS at Medium, 87.8 FPS at High, and 61.3 FPS at Ultra. The gap between Low and Ultra is 86.9 FPS, indicating that the GPU's shading units (1920) and texture mapping units (120) are heavily taxed by the highest quality settings.

Moving to 2560x1440, the frame rates show a predictable decline. Low settings yield 96.8 FPS, Medium 75.5 FPS, High 58.6 FPS, and Ultra 42.4 FPS. The transition from 1080p to 1440p costs approximately 35% performance across all presets, which aligns with the increased pixel count of 1.78x. Notably, High and Ultra at 1440p fall below the 60 FPS threshold, making them less desirable for competitive play.

At 3840x2160, the results become marginal. Low settings achieve 55.4 FPS, Medium 40.5 FPS, High 31.7 FPS, and Ultra 25.5 FPS. None of these presets reach 60 FPS, and only Low is consistently playable. The 4K-to-1080p performance ratio ranges from 2.67x (Low) to 2.40x (Ultra), showing that the GPU's 6 GB memory buffer and 192-bit bus width become severe constraints at this resolution.

The overall pattern shows that the RTX 2060 performs best when the pixel workload is moderate, and the Ryzen 5 2600 has sufficient compute to keep up at 1080p. The data indicates a balanced pairing at lower resolutions, with the GPU becoming the clear bottleneck as resolution increases.

CPU Role

The AMD Ryzen 5 2600 brings 6 cores and 12 threads based on the Zen+ architecture, manufactured on a 12 nm process at GlobalFoundries. Its base clock of 3.40 GHz and boost clock of 3.90 GHz provide the compute foundation for Evolve, which is a multiplayer FPS that relies on consistent frame delivery rather than extreme single-thread performance.

Benchmark data shows the CPU achieves a Cinebench R23 multicore score of 11186 and a single-core score of 1579, with a PassMark multithread score of 13160. These numbers indicate solid multi-threaded capability, which is relevant for Evolve's game logic and physics calculations that can utilize multiple threads. The 16 MB shared L3 cache and 46.9 GB/s memory bandwidth (dual-channel DDR4) provide adequate data throughput for feeding the RTX 2060.

The CPU's percentile ranking of 77 against all processors places it above average, and its nearest rivals in average benchmark score are all within 0.7% of its performance. This suggests that in terms of raw compute, the 2600 is not the limiting factor in this combo. The measured frame rates at 1080p Low (148.2 FPS) and Medium (113.4 FPS) indicate the CPU can sustain high input rates without becoming a bottleneck. However, at 4K Ultra (25.5 FPS), the GPU is clearly saturated, and the CPU's role diminishes as the pixel workload dominates.

The lack of integrated graphics on this CPU means the RTX 2060 handles all rendering tasks exclusively. The CPU's 65 W TDP and unlocked multiplier suggest it operates efficiently and can be overclocked for additional headroom, though the measured data reflects stock settings.

Settings Recommendations

For 1080p gameplay, the data clearly supports Ultra settings as the best experience-to-performance tradeoff. At 61.3 FPS, Ultra remains above the 60 FPS threshold while delivering the highest visual quality. Players prioritizing maximum frame rates can select Low for 148.2 FPS, but the jump to Medium (113.4 FPS) offers a substantial visual improvement with a modest 34.8 FPS cost.

At 1440p, Medium settings provide the best balance at 75.5 FPS. This stays comfortably above 60 FPS while offering better visual fidelity than Low (96.8 FPS). High settings at 58.6 FPS are borderline, and Ultra at 42.4 FPS is not recommended for smooth gameplay. The data suggests that 1440p Medium is the optimal configuration for this resolution.

For 4K, only Low settings at 55.4 FPS are viable for consistent play. Medium at 40.5 FPS and High at 31.7 FPS are playable but may feel sluggish in fast-paced FPS action, while Ultra at 25.5 FPS is below acceptable thresholds. Given the significant performance drop at 4K, players should consider whether the visual benefits justify the frame rate penalty.

Across all resolutions, the pattern is clear: Medium settings offer the best frame rate-to-quality ratio, with the caveat that 1080p is the only resolution where all presets exceed 60 FPS. The measured data does not include min or max FPS values, so recommendations are based solely on average frame rates.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with the TU106 chip, manufactured on a 12 nm process at TSMC. Its base clock of 1365 MHz and boost clock of 1680 MHz drive 1920 shading units, 120 TMUs, and 48 ROPs, producing 6.451 TFLOPS of FP32 compute. The 6 GB of GDDR6 memory on a 192-bit bus delivers 336.0 GB/s bandwidth, which is sufficient for 1080p and 1440p gaming but becomes a constraint at 4K.

The GPU's percentile ranking of 58 against all GPUs places it just above the median, with nearest rivals including the AMD Radeon RX 7600S (0.5% higher score) and AMD Radeon Pro 5600M (1.7% lower). Its PassMark G3D score of 14111 and Geekbench OpenCL score of 71278 indicate solid compute performance for its class.

In Evolve, the GPU's role is dominant at resolutions above 1080p. The 4K results show a clear memory bandwidth limitation: even at Low settings, the GPU only manages 55.4 FPS, which is 37.4 FPS lower than at 1080p Low. The 192-bit bus width and 336.0 GB/s bandwidth are insufficient for the pixel throughput required at 3840x2160, particularly with higher quality textures and effects.

At 1080p, the RTX 2060 demonstrates its strength. The 148.2 FPS at Low settings and 61.3 FPS at Ultra show that the GPU can handle the full range of visual presets at this resolution. The 30 RT cores and 240 tensor cores present in this Turing GPU are not specifically leveraged by Evolve, but the standard rasterization performance is clearly adequate for the game's 2015-era graphics requirements.

The GPU's 160 W TDP and dual-slot cooler design suggest it can maintain boost clocks under sustained load, though the measured data does not include clock behavior during gameplay. The 1x 8-pin power connector and 450 W suggested PSU indicate this is a power-efficient card for its performance class.