Fivem

The pairing of the AMD Ryzen 5 2600 with the AMD Radeon RX 9060 presents a specific set of performance characteristics in Fivem, a multiplayer title where frame rates are highly sensitive to both CPU and GPU load. The benchmark data reveals a combo that is capable of high refresh rate gaming at 1080p but begins to show its limitations as resolution increases, with the CPU emerging as a significant factor in determining overall playability. This analysis breaks down the measured FPS across resolutions and settings to provide a clear picture of what this hardware combination delivers.

Resolution Scaling

The measured FPS data shows a clear and predictable trend: as resolution increases from 1920x1080 to 3840x2160, average frame rates drop significantly across all settings. This scaling is critical for understanding where the bottleneck lies in this system.

At 1920x1080 with Low settings, the combo achieves an average of 175 FPS. Moving to 2560x1440 at the same settings drops this to 115 FPS, a reduction of 60 FPS. At 3840x2160, the average falls further to 64 FPS. This pattern indicates that the GPU is being increasingly taxed at higher resolutions, which is expected, but the magnitude of the drop from 1080p to 1440p (a 34% reduction) suggests that the RX 9060 is working hard to fill the extra pixels.

However, the scaling behavior at Ultra settings is more telling. At 1080p Ultra, the combo produces 86 FPS. At 1440p Ultra, this drops to 56 FPS, and at 4K Ultra, it falls to 31 FPS. The 4K Ultra result is particularly low, nearly halving the 1440p figure. This steep decline at the highest settings and resolution strongly suggests that the GPU is the primary limiting factor at 4K Ultra, as the rendering load becomes too heavy for the RX 9060 to maintain a smooth frame rate.

The situation inverts when looking at lower settings. At 1080p Low, the 175 FPS result is very high, but the scaling to 1440p Low (115 FPS) and 4K Low (64 FPS) still shows a substantial drop. This indicates that even at Low settings, the GPU's rendering capabilities are still being scaled with resolution, though the CPU's ability to feed it frames becomes more relevant. The data shows that the 1080p Low result is the only configuration that truly breaks past the 144 FPS mark, suggesting that for maximum refresh rates, this resolution and settings combination is the only viable path.

The presence of min and max FPS data for Medium settings provides additional insight. At 1080p Medium, the frame rate ranges from 117 to 159 FPS, with an average of 138. At 1440p Medium, the range is 77 to 105 FPS, and at 4K Medium, it is 43 to 58 FPS. These ranges show that the frame pacing is relatively stable, but the lower bounds at 4K (43 FPS) are getting close to the territory where gameplay can feel less fluid, especially in a multiplayer environment where quick reactions are key.

Overall, the resolution scaling analysis points to a system that is well-suited for 1080p gaming, capable of delivering high frame rates across most settings. At 1440p, the combo can still provide playable performance, but users will need to adjust settings to maintain a high refresh rate experience. At 4K, the system struggles to maintain 60 FPS even on Low settings, and the Ultra preset is essentially unplayable for competitive play.

How This Combo Ranks

In the broader context of all tested hardware combinations for Fivem, this specific pairing of the Ryzen 5 2600 and RX 9060 ranks at position 1714 out of 3005 total combos. This places it in the lower-middle portion of the performance spectrum, meaning that while it is not a bottom-tier setup, it is also far from the top-performing configurations.

This rank of 1714 out of 3005 indicates that roughly 57% of the tested combinations deliver higher average frame rates in Fivem. This is a significant data point for potential users, as it suggests that while this combo is competent, there are many other CPU and GPU pairings that will yield better overall performance in this specific game. The rank is a holistic measure that considers all the measured FPS data points, and the result is that this system is a solid mid-pack performer.

The ranking is particularly relevant when considering the age of the CPU. The Ryzen 5 2600, with its 6 cores and 12 threads, is a capable processor, but its single-thread performance is not class-leading. Benchmark data shows its Geekbench single-core score is 1154 and its Passmark single-thread score is 2239. In a game like Fivem, which is often sensitive to single-thread performance, this can hold back the overall combo, especially when paired with a modern GPU like the RX 9060 that is capable of producing high frame rates. The combo's rank reflects this potential imbalance, where the CPU may not be able to fully feed the GPU at lower resolutions and settings.

When compared to the GPU's own performance percentile, the combo's rank is notably lower. The RX 9060 sits in the 59th percentile of all GPUs, suggesting it is a reasonably strong performer on its own. However, the combo's rank in Fivem is in the 43rd percentile (1714/3005), which implies that the CPU is dragging the overall performance down in this specific game. This is a classic case of a CPU bottleneck, where the processor cannot keep up with the GPU's frame generation capabilities at certain settings and resolutions.

The data shows that this combo is not a top-tier pairing for Fivem. Users seeking the highest possible frame rates would need to look at configurations higher up the rank list. However, for a 1080p gaming setup, this rank is not a cause for alarm, as it still places the system in a position where it can deliver a playable experience, as evidenced by the measured FPS figures.

FAQ

Q: What is the best resolution to play Fivem with this CPU and GPU combo?

A: Based on the measured FPS, 1920x1080 is the optimal resolution. The data shows the combo can achieve an average of 138 FPS on Medium settings and 111 FPS on High settings at this resolution, which is well-suited for smooth gameplay. At 2560x1440, performance drops, with High settings averaging 73 FPS, and at 3840x2160, even Low settings only average 64 FPS.

Q: Can this system handle 1440p gaming in Fivem?

A: Yes, it can, but with caveats. At 2560x1440, the Medium preset delivers an average of 91 FPS, which is playable. The High preset drops to 73 FPS, and Ultra falls to 56 FPS. For a competitive edge, the Low preset at 1440p yields 115 FPS, but users should be aware that the experience is not as consistently high as at 1080p.

Q: How does the Ryzen 5 2600's CPU performance affect the gaming experience?

A: The CPU has 6 cores and 12 threads with a boost clock of 3.90 GHz. Its single-thread performance, as indicated by a Geekbench single-core score of 1154, is likely a limiting factor. In Fivem, this can prevent the system from reaching its full potential at 1080p, where the GPU might be capable of higher frame rates than the CPU can provide.

Q: Is the RX 9060 a good match for the Ryzen 5 2600?

A: The data suggests it is a somewhat unbalanced pairing. The RX 9060 has a Passmark G3D score of 17631 and sits in the 59th percentile of GPUs, indicating it is a capable card. However, the combo's rank of 1714 out of 3005 in Fivem suggests the CPU is holding back the GPU's performance, especially in a game that is seemingly sensitive to single-thread CPU speed.

Q: What frame rates can be expected at 4K with this combo?

A: 4K performance is generally poor. At 3840x2160, the Low preset averages 64 FPS, which is the only playable option. The Medium preset averages 50 FPS, High averages 40 FPS, and Ultra averages only 31 FPS. For a consistent 60 FPS experience, 4K is not recommended with this hardware.

Q: By how much does the Ultra preset improve visual quality compared to the performance cost?

A: The Ultra preset comes with a significant performance penalty. At 1920x1080, moving from High (111 FPS) to Ultra (86 FPS) costs 25 FPS, a 23% drop. At 2560x1440, the drop is from 73 FPS to 56 FPS, and at 3840x2160, it drops from 40 FPS to 31 FPS. The visual upgrade is typically not worth such a large reduction in frame rate for a multiplayer game.

Measured FPS Breakdown

The following data presents the exact average FPS measurements for the AMD Ryzen 5 2600 and AMD Radeon RX 9060 combination in Fivem. All figures are directly from the benchmark results.

1920x1080 (1080p)

• Low: The average frame rate is 175 FPS. This is the highest score recorded for this combo, indicating the system is heavily CPU-bound at this point.
• Medium: The average frame rate is 138 FPS. The minimum FPS recorded is 117, and the maximum is 159, showing a stable frame delivery.
• High: The average frame rate is 111 FPS. This represents a solidly playable experience for high-refresh-rate monitors.
• Ultra: The average frame rate is 86 FPS. This is a significant drop from High, showing the cost of the highest settings.

2560x1440 (1440p)

• Low: The average frame rate is 115 FPS. This is still a high score, but it is 60 FPS lower than the 1080p Low result.
• Medium: The average frame rate is 91 FPS. The minimum FPS is 77, and the maximum is 105, indicating a wider variance than at 1080p.
• High: The average frame rate is 73 FPS. This is at the lower edge of what is considered smooth for fast-paced gaming.
• Ultra: The average frame rate is 56 FPS. This result suggests that 1440p Ultra is not ideal for competitive play.

3840x2160 (4K)

• Low: The average frame rate is 64 FPS. This is the only 4K setting that comes close to a 60 FPS baseline.
• Medium: The average frame rate is 50 FPS. The minimum FPS is 43, and the maximum is 58, showing that the system is struggling to maintain a high frame rate.
• High: The average frame rate is 40 FPS. This is not a smooth experience for most users.
• Ultra: The average frame rate is 31 FPS. This is the lowest recorded score and is not recommended for gameplay.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, based on the Zen+ architecture. It has a base clock of 3.40 GHz and a boost clock of 3.90 GHz. While it has a respectable multi-threaded capability, its single-thread performance is the key factor in Fivem. The CPU's Geekbench single-core score is 1154, and its Passmark single-thread score is 2239. These figures are modest by modern standards and play a crucial role in the measured frame rates.

In a game like Fivem, which is a multiplayer modification for Grand Theft Auto V, the CPU is often the primary bottleneck. The game's engine is known to be heavily dependent on a single main thread for processing game logic and network data. The Ryzen 5 2600's relatively low single-core performance means it cannot always feed the RX 9060 with enough data to keep it fully occupied, especially at 1080p where the GPU is less taxed.

This is evident in the 1080p Low result of 175 FPS. The GPU could likely render frames faster than this, but the CPU is reaching its limit. The fact that the 1080p Low score (175 FPS) is significantly higher than the 1440p Low score (115 FPS) shows that the GPU is still scaling with resolution, but the CPU's frame generation is capped. The CPU's performance is also reflected in the combo's overall rank of 1714 out of 3005, which suggests that pairing this CPU with a faster GPU would not yield proportional gains in this game.

The CPU's 16 MB of shared L3 cache and dual-channel DDR4 memory support with a bandwidth of 46.9 GB/s are adequate, but they do not compensate for the single-thread limitation. For users of this combo, understanding that the CPU is the limiting factor is crucial. Upgrading the CPU would likely provide a more substantial FPS boost in Fivem than upgrading the GPU, particularly at 1080p and 1440p resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the user's target resolution and refresh rate. The goal is to maintain a frame rate that is both smooth and responsive, particularly in a multiplayer environment.

For users with a 1080p monitor with a 144Hz refresh rate, the High preset is the best choice. It delivers an average of 111 FPS, which is close to the 144 FPS target and is a clear upgrade over the Medium preset's 138 FPS in visual quality. The Ultra preset at 86 FPS is not worth the frame rate loss for the marginal visual improvement. The Low preset at 175 FPS is only useful for users with a 165Hz or higher refresh rate monitor who are chasing maximum frame rates.

For users with a 1440p monitor, the Medium preset is the recommended choice. It provides an average of 91 FPS, which is a playable and smooth experience for most gamers. The High preset at 73 FPS is also viable, but it is on the lower end for fast-paced action. The Ultra preset at 56 FPS should be avoided for competitive play, as it is below the 60 FPS threshold. The Low preset at 115 FPS is the best option for users who prioritize frame rate over visual fidelity at this resolution.

At 4K, the options are limited. The Low preset is the only setting that achieves a near-60 FPS average (64 FPS). This is the only recommended setting for 4K play. The Medium preset at 50 FPS is playable but not ideal, and the High and Ultra presets are not recommended due to their low frame rates. Given the hardware, 4K gaming is not the intended use case for this combo.

In summary, the best experience is found at 1080p with the High preset, offering a balance of visual quality and performance. At 1440p, the Medium preset is the sweet spot. For 4K, users should stick to the Low preset if they must play at that resolution. The data strongly suggests that this combo is best suited for high-refresh-rate 1080p gaming.