Doom

The AMD Ryzen 5 7500F paired with the Intel Arc B570 produces a combination that ranks 2332 out of 2930 tested combos in Doom, placing it in the 21st percentile of all tested systems. This is a mid-to-low tier ranking that reflects a pairing where the GPU is the primary constraint at higher resolutions, while the CPU demonstrates ample headroom. The benchmark data shows a system capable of smooth 1080p play at high settings, but one that struggles to maintain playable frame rates at 4K with maximum quality presets. The measured results indicate a balanced pairing at 1440p, where the Arc B570's 10 GB of VRAM and 380.0 GB/s of bandwidth are sufficient to deliver a solid experience without the CPU becoming a bottleneck.

How This Combo Ranks

The combo’s rank of 2332 out of 2930 places it in the lower 21% of all tested configurations for Doom. This does not mean the experience is poor, but rather that many other CPU-GPU pairings achieve higher average frame rates in this specific title. The ranking is heavily influenced by the GPU's performance ceiling; the Arc B570 sits in the 65th percentile among all GPUs based on its average benchmark score of 20556. In contrast, the Ryzen 5 7500F is in the 77th percentile among all CPUs, with an average score of 24964. This discrepancy suggests the GPU is the limiting factor in most scenarios, dragging the overall combo rank down relative to what the CPU alone might achieve.

Looking at the CPU’s nearest rivals provides context for its performance tier. The Ryzen 5 7500F scores 0.1% higher than the Intel Core i7-11850H and 0.2% higher than the Intel Core i7-13620H, while trailing the AMD Ryzen 5 8400F by 0.2%. These margins are negligible, confirming that the processor is competitive with mid-range laptop and desktop chips from recent generations. However, in Doom, the CPU's strong single-threaded performance does not translate into a top-tier combo rank because the game's frame rate is more dependent on GPU throughput at the tested settings. The data shows that even at 1080p Low, the system reaches 164 FPS, which is high but not exceptional compared to top-tier combos that likely exceed 200 FPS.

The combo’s rank is further contextualized by the GPU’s nearest rivals. The Arc B570 scores 0.1% higher than the NVIDIA GeForce RTX 3070 Mobile and 0.4% higher than the NVIDIA Quadro M4000M, while being 0.1% lower than the Intel Arc A750 and 0.5% lower than the AMD Radeon R9 M390X. This places the GPU in a performance band where it trades blows with older and mobile parts, which explains why the overall combo rank is not higher. For Doom, a game from 2016, the Arc B570's architecture is capable, but the measured FPS data shows it falls short of the highest refresh rate experiences at 4K.

Settings Recommendations

The measured FPS data suggests that the optimal balance between visual quality and performance is achieved at Medium settings across all resolutions. At 1080p, Medium delivers an average of 143 FPS with a minimum of 121 FPS, which is well above the 60 FPS threshold for smooth gameplay and close to the 144 Hz refresh rate common on modern monitors. High settings at 1080p reduce the average to 121 FPS, which is still excellent, but the minimum frame rate is not recorded in the data, making Medium the safer choice for consistent performance. At 1440p, Medium produces an average of 92 FPS with a minimum of 79 FPS, which is ideal for 60 Hz or 75 Hz displays and provides a comfortable margin above the minimum for demanding scenes.

Ultra settings are the most demanding preset, and the data shows they push the system to its limits. At 1440p Ultra, the average drops to 64 FPS, which is playable but leaves little headroom for frame time spikes. The minimum frame rate at this setting is not recorded, but the average suggests that 4K Ultra would be a poor experience. Indeed, at 4K Ultra, the average falls to 35 FPS, which is below the standard for smooth gameplay. Low settings offer the highest frame rates, with 164 FPS at 1080p and 106 FPS at 1440p, but they sacrifice visual fidelity significantly. For a game like Doom, where fast-paced action benefits from high frame rates, Medium at 1080p or 1440p is the recommended sweet spot, offering a 143 FPS or 92 FPS average respectively while maintaining reasonable visual quality.

Resolution Scaling

The FPS drop from 1080p to 4K reveals a clear GPU-bound scenario. At Medium settings, the average frame rate declines from 143 FPS at 1080p to 92 FPS at 1440p, a 36% reduction, and then to 50 FPS at 4K, a further 46% reduction from 1440p. This scaling pattern is typical of a GPU-limited system, where the CPU has sufficient headroom but the graphics card cannot keep up with the increasing pixel count. The fact that the frame rate nearly halves from 1440p to 4K indicates that the Arc B570's rendering throughput is the primary constraint, as the 4K resolution quadruples the pixel count compared to 1080p, requiring far more GPU work.

The data also shows that the CPU is not a bottleneck at any resolution. At 1080p Low, the system achieves 164 FPS, which is a high frame rate that would stress a weaker CPU, but the Ryzen 5 7500F with its 5.00 GHz boost clock and 6 cores / 12 threads handles this without issue. The frame rate at 1080p Low is only 15% higher than at 1080p Medium, suggesting that the GPU is already near its limit even at the lowest settings. This is further confirmed by the 4K results, where the difference between Low (57 FPS) and Medium (50 FPS) is just 12%, indicating that the GPU's compute and memory bandwidth are the limiting factors rather than any CPU-related constraint.

The scaling from 1080p to 4K at High settings shows a similar pattern: 121 FPS at 1080p drops to 78 FPS at 1440p (36% reduction) and then to 42 FPS at 4K (46% reduction from 1440p). This consistent drop-off across settings confirms that the GPU is the dominant bottleneck in this pairing. The Ryzen 5 7500F's 32 MB of L3 cache and dual-channel DDR5 memory bandwidth of 83.2 GB/s are more than adequate for feeding the GPU, but the Arc B570's 10 GB of VRAM and 160-bit memory bus become strained at higher resolutions, particularly at 4K where the frame rates fall below 60 FPS even on Low settings.

Measured FPS Breakdown

At 1080p, the system delivers its best performance. Low settings produce an average of 164 FPS, Medium produces 143 FPS with a minimum of 121 FPS and a maximum of 164 FPS, High produces 121 FPS, and Ultra produces 99 FPS. These numbers show a smooth progression where each step up in quality costs roughly 20-25 FPS. The minimum frame rate at Medium (121 FPS) is identical to the average at High, indicating that even in demanding scenes, the frame rate stays high. This resolution is clearly where the combo is most comfortable, offering playable frame rates even at Ultra.

At 1440p, the performance drops but remains respectable. Low settings average 106 FPS, Medium averages 92 FPS with a minimum of 79 FPS and a maximum of 106 FPS, High averages 78 FPS, and Ultra averages 64 FPS. The minimum frame rate at Medium (79 FPS) is above the 60 FPS threshold, making this a viable resolution for smooth gameplay. The gap between Low and Ultra is 42 FPS, which is a significant range, but all settings except Ultra deliver frame rates above 75 FPS. Ultra at 64 FPS is still playable, but it lacks the headroom for consistent 60 FPS in the most intense combat scenarios.

At 4K, the system struggles. Low settings produce an average of 57 FPS, Medium averages 50 FPS with a minimum of 43 FPS and a maximum of 58 FPS, High averages 42 FPS, and Ultra averages 35 FPS. Only Low settings approach the 60 FPS target, and even then, the average is below it. Medium settings dip to a minimum of 43 FPS, which will be noticeable in fast-paced gameplay. The data clearly indicates that 4K is not a practical resolution for this combination if the goal is a smooth experience, as even the lowest settings fail to maintain a consistent 60 FPS. The Ultra preset at 4K is essentially unplayable for competitive or fast-paced play, with an average of 35 FPS.

GPU Role

The Intel Arc B570 is the defining component in this pairing, and its specifications explain the measured results. With 10 GB of GDDR6 memory on a 160-bit bus, the GPU provides 380.0 GB/s of bandwidth. This is sufficient for 1080p and 1440p gaming, but at 4K, the high-resolution textures and increased pixel count strain the memory subsystem. The GPU's 2304 shading units and 80 ROPs deliver a pixel rate of 200.0 GPixel/s and a texture rate of 360.0 GTexel/s, which are middle-of-the-road figures for a modern GPU. The FP32 performance of 11.52 TFLOPS places it in a competitive band, as evidenced by its benchmark scores.

The GPU's clock speed is fixed at 2500 MHz for both base and boost, which is a modest clock for a 5 nm process. The 3DMark Steel Nomad DX12 score of 2649 and the Passmark G3D score of 14195 reflect its performance in synthetic tests, but the Doom results are more telling. The GPU's average benchmark score of 20556 puts it at 65th percentile among all GPUs, and its nearest rivals include the RTX 3070 Mobile and the Arc A750, which are both capable parts. The fact that the Arc B570 is within 0.5% of these rivals shows that it is a well-positioned mid-range GPU, but it lacks the raw power to push 4K frame rates above 60 FPS in a demanding title like Doom.

The GPU's 18 RT cores are irrelevant for this game, as Doom does not use ray tracing, but the 144 TMUs and 80 ROPs are directly relevant to the rasterization performance measured in the FPS data. The memory bandwidth of 380.0 GB/s is a key factor in the 4K results, as the game's textures and geometry at that resolution require rapid data transfer. The GPU's 150 W TDP and 450 W suggested PSU indicate it is an efficient part, but the benchmark data shows that its performance ceiling is reached at 1440p High, where it averages 78 FPS, and it falls short at 4K.

FAQ

Q: What is the best resolution for this combo in Doom?

A: The data shows that 1080p is the best resolution, with an average of 143 FPS at Medium settings and 121 FPS at High. 1440p is also viable, with 92 FPS at Medium, but 4K is not recommended as the average frame rate drops to 50 FPS at Medium and 35 FPS at Ultra.

Q: Is the CPU or GPU the limiting factor at 4K?

A: The GPU is the limiting factor at 4K. The frame rate drops from 57 FPS at Low to 50 FPS at Medium and 42 FPS at High, showing that the GPU's rendering power is the bottleneck. The CPU, with its high single-threaded score of 3218 in Cinebench R23, has ample headroom.

Q: How does the Arc B570 compare to its nearest GPU rivals?

A: The Arc B570 scores 0.1% higher than the NVIDIA GeForce RTX 3070 Mobile and 0.4% higher than the NVIDIA Quadro M4000M, while being 0.1% lower than the Intel Arc A750 and 0.5% lower than the AMD Radeon R9 M390X. These margins are minimal, indicating similar performance levels.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 1440p, Low settings average 106 FPS, while Ultra settings average 64 FPS, a difference of 42 FPS. Medium settings sit in between at 92 FPS, making it the best compromise between visual quality and performance.

Q: Does the Ryzen 5 7500F bottleneck the Arc B570 in Doom?

A: No, the data suggests the CPU does not bottleneck. At 1080p Low, the system reaches 164 FPS, which would expose a weak CPU, but the Ryzen 5 7500F maintains this frame rate. The CPU's 6 cores and 12 threads, with a boost clock of 5.00 GHz, are sufficient for the game's demands.

Q: Is the Arc B570's 10 GB of VRAM enough for Doom at high settings?

A: Yes, 10 GB is sufficient for 1080p and 1440p, as shown by the 121 FPS and 78 FPS averages at High settings respectively. At 4K, the VRAM capacity is not the primary issue; the GPU's compute power is the limiting factor, as evidenced by the 42 FPS average at High.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, manufactured on a 5 nm process by TSMC. Its base clock of 3.70 GHz and boost clock of 5.00 GHz provide strong single-threaded performance, which is critical for Doom's game logic and physics. The CPU’s benchmark results confirm its capability: a Cinebench R23 single-core score of 3218 and a multi-core score of 22799. These scores place it in the 77th percentile among all CPUs, with an average benchmark score of 24964. The nearest rivals, including the Intel Core i7-11850H and the AMD Ryzen 5 8400F, are within 0.2% of its score, showing that the 7500F is competitively positioned.

In Doom, the CPU's role is to feed the GPU with draw calls and process game state, and the data shows it performs this task admirably. At 1080p Low, the system achieves 164 FPS, which is a high frame rate that would bottleneck a slower CPU. The fact that the frame rate drops to 143 FPS at Medium and 121 FPS at High indicates that the GPU is the limiting factor, not the CPU. The CPU's 32 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s of bandwidth ensure that data is delivered to the GPU efficiently. The 7500F's 65 W TDP and 5 nm process node make it an efficient part, but its performance in this game is more than adequate, as evidenced by the fact that it does not constrain frame rates even at 1440p.

The CPU's single-threaded performance, as measured by a 3DMark single-thread score of 974 and a Passmark single-thread score of 3841, is particularly relevant for Doom, which relies on a single main game thread. The high boost clock of 5.00 GHz ensures that this thread executes quickly, preventing CPU-bound frame rate drops. The data shows that at 4K, the frame rates are determined entirely by the GPU, as the CPU has no trouble keeping up with the lower FPS demands. The Ryzen 5 7500F is a capable partner for the Arc B570, but the combo's overall rank is limited by the GPU's performance, not the CPU's.