Archeage

The AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 5070 combination delivers a playable but demanding experience in Archeage, with performance scaling that clearly shows the GPU as the primary bottleneck at higher resolutions. The data indicates this is a pairing that excels at 1080p and 1440p, while 4K Ultra pushes the limits of what the RTX 5070 can handle in this MMORPG.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent, revealing a GPU-bound scenario at higher resolutions. At High settings, the average frame rate falls from 136 FPS at 1920x1080 to 92 FPS at 2560x1440, a 32% reduction. Moving to 3840x2160, the average drops further to 52 FPS, which is 62% below the 1080p result. This pattern indicates that the RTX 5070’s rendering throughput is the limiting factor as pixel count increases.

The scaling is even more pronounced at Ultra settings. The 1080p Ultra average of 93 FPS drops to 62 FPS at 1440p, and then plummets to 36 FPS at 4K. The 4K Ultra result is a 61% decrease from the 1080p figure, showing that the highest quality preset combined with 4K resolution places an overwhelming load on the GPU. This is not a CPU limitation; the Ryzen 9 9900X3D’s strong single-thread performance is more than sufficient to feed the GPU at these settings.

Low settings tell a different story. At 1080p Low, the combo achieves 225 FPS, which drops to 151 FPS at 1440p and 87 FPS at 4K. The 4K Low result is still higher than the 4K High result, confirming that the GPU is the bottleneck. If the CPU were the limiting factor, the frame rate would remain relatively flat across resolutions at the same settings. The data shows a clear and substantial drop, which is the signature of a GPU-bound workload.

The Medium settings results provide a middle ground. At 4K Medium, the average is 77 FPS with a minimum of 66 FPS and a maximum of 89 FPS. This is a playable experience, but the gap between 4K Medium and 4K High is only 25 FPS, suggesting that the GPU is already working hard. At 1080p Medium, the average is 200 FPS, which is close to the Low setting’s 225 FPS, indicating that the CPU can handle the additional visual effects without a major performance hit.

How This Combo Ranks

This specific combination of the Ryzen 9 9900X3D and RTX 5070 ranks 536 out of 2761 tested combos in Archeage. This places it in the top 19% of all tested systems, which is a strong showing. The data indicates that this combo outperforms the vast majority of alternatives, though it is not at the very top of the charts.

The ranking reflects a balanced system that is well-suited for this game. The high percentile of the CPU (91st) and the solid percentile of the GPU (82nd) contribute to a configuration that is capable of delivering high frame rates at mainstream resolutions. However, the 4K Ultra result of 36 FPS shows that it is not an absolute top-tier 4K system. The rank of 536 suggests that there are 535 other combinations that achieve higher average performance in this specific game, likely featuring more powerful GPUs.

This rank is a global metric for the game. It is important to note that the data is measured, not estimated, which adds confidence to the ranking. The combination’s position in the top 20% indicates that a user can expect a smooth experience at 1080p and 1440p, with some compromises needed at 4K. The ranking is a useful reference point for comparing this specific hardware pairing against all others in the database.

CPU Role

The AMD Ryzen 9 9900X3D is a 12-core, 24-thread processor based on the Zen 5 architecture. It has a base clock of 4.40 GHz and a boost clock of 5.50 GHz. The processor’s 128 MB of L3 cache is a key feature for gaming, as it helps reduce memory latency and improve performance in titles that benefit from larger caches.

In Archeage, the CPU’s role is to maintain a high frame rate by feeding the GPU with draw calls and game logic. The benchmark results for this CPU are strong. The Cinebench R23 multicore score of 47737 and single-core score of 6739 indicate excellent performance in both multi-threaded and single-threaded workloads. The Geekbench single-core score of 3041 reinforces this. These scores suggest that the CPU is not a bottleneck in this game, especially at higher resolutions where the GPU is under more load.

The 3DMark results show a clear scaling pattern. The 2-thread score is 2512, the 4-thread score is 4885, the 8-thread score is 9002, and the max-thread score is 13795. This indicates that the processor scales well with additional threads, which is beneficial for modern games that can utilize multiple cores. However, Archeage, being an MMORPG from 2014, may not fully utilize all 24 threads. The strong single-thread performance is likely more critical for maintaining high frame rates in crowded areas or during complex combat scenarios.

The CPU’s average benchmark score is 54762, which places it in the 91st percentile of all CPUs. This is a very high ranking. When compared to its nearest rivals, the Intel Core Ultra 5 245KF has an average score of 55093, which is 0.6% higher. The Intel Core Ultra 5 245K is 1.3% lower, and the Intel Xeon 6505P is 2% lower. The data shows that the Ryzen 9 9900X3D is competitive with these alternatives, with the differences being small in real-world terms. This means the CPU provides a solid foundation for the RTX 5070 in this game.

Measured FPS Breakdown

The measured FPS data provides a detailed look at how the combo performs across different resolutions and settings. At 1920x1080, the Low setting achieves an average of 225 FPS, which is the highest result in the entire dataset. The Medium setting is close behind at 200 FPS, with a minimum of 170 FPS and a maximum of 230 FPS. The High setting drops to 136 FPS, and the Ultra setting is the lowest at 1080p with 93 FPS. This shows a clear progression where higher quality presets cost a significant number of frames.

At 2560x1440, the performance scales down accordingly. The Low setting averages 151 FPS, the Medium setting averages 135 FPS (with a minimum of 115 FPS and a maximum of 155 FPS), the High setting averages 92 FPS, and the Ultra setting averages 62 FPS. The 1440p High result is a 32% decrease from the 1080p High result, which is a typical drop for this resolution change. The 1440p Ultra result of 62 FPS is still playable, but it is close to the edge of what many users would consider smooth.

At 3840x2160, the GPU is under maximum strain. The Low setting achieves 87 FPS, which is the only 4K result above 60 FPS. The Medium setting averages 77 FPS with a minimum of 66 FPS, which is a playable result. The High setting drops to 52 FPS, and the Ultra setting falls to 36 FPS. The 4K Ultra result is the lowest in the dataset and is likely too choppy for a competitive or fast-paced experience. The 4K Medium result is the sweet spot for 4K gaming on this combo, offering a balance between visual quality and frame rate.

The data shows that the combo is best suited for 1080p and 1440p gaming. At 1080p, even the Ultra setting is above 90 FPS, which is smooth. At 1440p, the High setting is above 90 FPS, and the Medium setting is well above 120 FPS. For 4K, users will need to use Medium settings or lower to maintain a playable frame rate.

GPU Role

The NVIDIA GeForce RTX 5070 is based on the Blackwell 2.0 architecture and features 12 GB of GDDR7 memory on a 192-bit bus. The memory bandwidth is 672.0 GB/s, which is substantial for a card in this class. The GPU has a base clock of 2325 MHz and a boost clock of 2512 MHz. It has 6144 shading units, 192 TMUs, and 80 ROPs.

In Archeage, the GPU’s role is to render the game world, including characters, textures, and effects. The benchmark results show that the RTX 5070 is a capable card, with a 3DMark Steel Nomad DX12 score of 5077. The Geekbench Vulkan score of 178923 and OpenCL score of 172660 indicate strong compute performance. The Passmark G3D score of 29137 is also respectable.

The GPU’s average benchmark score is 40377, which places it in the 82nd percentile of all GPUs. This is a solid ranking. Its nearest rivals include the AMD Radeon Pro 580, which has an average score of 40318 (0.1% lower), and the AMD Radeon Pro WX 7100, which has an average score of 40063 (0.8% lower). The NVIDIA RTX A500 Mobile has a score of 39568, which is 2% lower. The data shows that the RTX 5070 is competitive with these workstation-class GPUs, though it is a consumer gaming card.

The 12 GB of VRAM is sufficient for Archeage at all tested resolutions and settings. The game is from 2014, and its texture requirements are not as high as modern titles. The 4K Ultra setting does not appear to exceed the VRAM capacity, as the card is able to complete the benchmark, albeit at a low frame rate. The GPU’s TDP is 250 W, and it requires a 600 W power supply, which is a consideration for system builders. The card’s dual-slot design and 245 mm length make it a standard size that fits in most cases.

FAQ

Q: What is the best resolution and settings combination for this hardware in Archeage?

A: The data shows that 2560x1440 with High settings is a strong choice, averaging 92 FPS. For a higher frame rate, 1920x1080 with Medium settings averages 200 FPS. At 4K, Medium settings are the most playable, with an average of 77 FPS.

Q: How does this combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo averages only 36 FPS. This is the lowest result in the dataset and is likely not smooth enough for most users.

Q: Is the CPU or GPU the main bottleneck in this game?

A: The resolution scaling data indicates the GPU is the bottleneck. At High settings, the average FPS drops from 136 at 1080p to 52 at 4K, which is a GPU-bound pattern. The CPU’s strong single-thread performance is sufficient for this game.

Q: How does this combo rank compared to other tested systems?

A: This combination ranks 536 out of 2761 tested combos in Archeage, placing it in the top 19% of all systems in the database.

Q: What are the CPU’s key specifications for gaming?

A: The AMD Ryzen 9 9900X3D has 12 cores and 24 threads with a boost clock of 5.50 GHz. It features 128 MB of L3 cache, which is designed to improve gaming performance.

Q: What is the GPU’s memory configuration?

A: The NVIDIA GeForce RTX 5070 has 12 GB of GDDR7 memory on a 192-bit bus, with a memory bandwidth of 672.0 GB/s. This is sufficient for Archeage at all tested settings.