Archeage
This combination delivers exceptional performance with an average of 123 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 58 | 85 | 95 |
| 1440p QHD | 69 | 101 | 148 | 166 |
| 1080p Full HD | 102 | 149 | 220 | 247 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
# Archeage Performance Analysis: AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 4070 Ti
This combination of the AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 4070 Ti delivers a broad range of frame rates across Archeage's settings and resolutions, with the data revealing a system that transitions from heavily GPU-bound at 4K Ultra to increasingly CPU-limited at 1080p Low. The measured results show averages from 39 FPS at the most demanding configuration up to 247 FPS at the least demanding, positioning this combo at rank 445 out of 3708 tested combinations.
Resolution Scaling
The frame rate behavior across resolutions demonstrates the expected inverse relationship between pixel count and performance, but the magnitude of the drops varies significantly by settings preset. At High settings, the average FPS falls from 149 at 1080p to 101 at 1440p, a 32% reduction, and then further to 58 at 4K, representing a 61% drop from the 1080p baseline. This steep decline indicates that at higher resolutions, the rendering workload scales aggressively with pixel count, which is typical for a GPU-bound scenario in this MMORPG.
Low settings show a similar pattern but with larger absolute numbers. The 1080p Low average of 247 FPS drops to 166 at 1440p (a 33% decrease) and then to 95 at 4K (a 62% decrease from 1080p). The consistency of these percentage drops across Low and High presets suggests that the resolution scaling is largely independent of the quality preset, with the GPU's fill rate and shading capacity being the primary constraints as resolution increases.
Medium settings follow the same trend: 220 FPS at 1080p, 148 at 1440p (down 33%), and 85 at 4K (down 61%). Ultra settings, however, show a more dramatic scaling penalty. From 102 FPS at 1080p, the average drops to 69 at 1440p (a 32% decline) and then to 39 at 4K, a 62% drop from the 1080p result. The uniformity of these scaling ratios — all presets lose roughly 60-62% going from 1080p to 4K — strongly indicates that the limiting factor shifts entirely to the GPU at 4K, with the CPU overhead becoming proportionally less significant as resolution increases.
The 4K Ultra result of 39 FPS is particularly telling: it falls below the 4K High figure of 58 FPS by 19 FPS, showing that the Ultra preset imposes a substantial additional rendering cost beyond High. At 1080p, the gap between Ultra (102 FPS) and High (149 FPS) is 47 FPS, while at 4K that gap narrows to 19 FPS. This compression of performance differences at higher resolutions reinforces that the GPU is the dominant bottleneck when pixel counts rise, while at 1080p the CPU has more headroom to expose the GPU's full potential.
GPU Role
The NVIDIA GeForce RTX 4070 Ti, built on the Ada Lovelace architecture with a 5 nm process, brings 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. Its base clock of 2310 MHz and boost clock of 2610 MHz, combined with 7680 shading units, 240 TMUs, and 80 ROPs, produce a pixel rate of 208.8 GPixel/s and a texture rate of 626.4 GTexel/s. These specifications directly inform the resolution scaling observed: the 4K Ultra result of 39 FPS reflects the GPU's capacity limits when rendering at 3840x2160 with maximum quality effects, while the 1080p Low result of 247 FPS shows the card's raw throughput when the workload is lighter.
The memory subsystem plays a critical role in Archeage's performance consistency. With 12 GB of VRAM, the RTX 4070 Ti has ample capacity for this 2014 MMORPG at all tested settings, so memory capacity is unlikely to be a limiting factor. The 504.2 GB/s bandwidth, however, becomes more relevant at higher resolutions where texture fetch and buffer updates scale with pixel count. The 4K Medium result of 85 FPS, with a minimum of 72 and maximum of 97, shows a relatively tight frame time distribution, suggesting that memory bandwidth is sufficient to maintain stable throughput at this configuration.
The GPU's 40.09 TFLOPS of FP32 compute and 40.09 TFLOPS of FP16 (1:1 ratio) provide the arithmetic throughput needed for modern rendering techniques, but Archeage's age means it likely relies on more traditional rasterization paths. The RTX 4070 Ti's 60 RT cores and 240 tensor cores are present but may see limited utilization in this title, which predates widespread ray tracing adoption. The Passmark G3D score of 31624 and the 3DMark Steel Nomad DX12 score of 5024 place this GPU at the 84th percentile among all GPUs, and its nearest rivals include the RTX 5090 Mobile (0.8% lower average score) and the RTX A6000 (1.6% higher average score), indicating it sits in a competitive performance tier.
FAQ
Q: What is the highest average frame rate measured for this combo?
A: The highest average FPS is 247, achieved at 1920x1080 with Low settings. The next highest is 220 FPS at 1080p Medium, followed by 166 FPS at 1440p Low.
Q: Can this system maintain 60 FPS at 4K?
A: At 4K High settings, the average is 58 FPS, slightly below the 60 FPS threshold. At 4K Medium, the average rises to 85 FPS, which does exceed 60 FPS. The 4K Low preset averages 95 FPS, and 4K Ultra averages only 39 FPS.
Q: How does the Ultra preset compare to High at 1440p?
A: At 2560x1440, High averages 101 FPS while Ultra averages 69 FPS, a difference of 32 FPS. The Ultra preset costs roughly 32% of the High preset's performance, making it a significant visual quality investment.
Q: What is the frame time consistency at Medium settings?
A: At Medium settings, the minimum and maximum FPS are recorded. At 1080p, the range is 187 to 253 FPS (average 220). At 1440p, the range is 126 to 170 FPS (average 148). At 4K, the range is 72 to 97 FPS (average 85). The spread widens at lower resolutions, indicating more variance in frame times.
Q: How does this combo rank among all tested combinations?
A: This specific CPU-GPU pairing ranks 445th out of 3708 tested combos for Archeage, placing it in the top 12% of all configurations.
Q: Is the GPU or CPU more likely to bottleneck at 1080p Low?
A: At 1080p Low, the 247 FPS average suggests the CPU is playing a larger role in limiting performance, as the GPU has relatively light work. The Ryzen 9 9900X3D's strong single-thread performance of 1269 in 3DMark single-thread and 4646 in Passmark single-thread helps sustain these high frame rates.
Settings Recommendations
The measured data supports a clear tiered recommendation based on resolution priorities. For players targeting 4K, the Medium preset at 85 FPS offers the best balance of visual quality and smoothness, as High drops to 58 FPS and Ultra falls to 39 FPS, both of which risk perceptible stutter on standard 60 Hz displays. The 4K Medium minimum of 72 FPS ensures that even the worst-case frames remain above the 60 FPS threshold, providing a consistent experience.
At 1440p, the High preset at 101 FPS is the recommended choice for most users, as it delivers a smooth frame rate while preserving visual fidelity. Those with high-refresh-rate monitors (144 Hz or above) could consider Medium at 148 FPS, which offers a 47 FPS advantage over High but sacrifices some quality. The Ultra preset at 69 FPS is only advisable for players who prioritize maximum visuals over frame rate, given that it still clears the 60 FPS bar but leaves little headroom for demanding scenes.
For 1080p, the Medium preset at 220 FPS is the standout recommendation, providing a high frame rate that exceeds most high-refresh displays' capabilities while maintaining a minimum of 187 FPS. The Low preset at 247 FPS offers marginal gains over Medium (27 FPS) and may be preferable for competitive play, but the medium preset's minimum of 187 FPS is already well above typical display refresh rates. The High preset at 149 FPS is a solid middle ground, and Ultra at 102 FPS remains playable but represents a significant drop from the other presets. The data shows that Ultra consistently costs roughly 50-60% of the High preset's performance across all resolutions, making it a demanding choice.
Measured FPS Breakdown
At 1920x1080, the Low preset delivers an average of 247 FPS, with no minimum or maximum recorded. Medium settings average 220 FPS, with a recorded range of 187 to 253. High settings average 149 FPS, and the Ultra preset averages 102 FPS. The progression from Low to Ultra shows a monotonic decrease, with each step up in quality costing a substantial fraction of performance: Low to Medium costs 27 FPS, Medium to High costs 71 FPS, and High to Ultra costs 47 FPS.
Moving to 2560x1440, the Low preset averages 166 FPS, a drop of 81 FPS from 1080p Low. Medium settings average 148 FPS, with a range of 126 to 170. High settings average 101 FPS, and Ultra averages 69 FPS. The deltas between presets compress somewhat compared to 1080p: Low to Medium is 18 FPS, Medium to High is 47 FPS, and High to Ultra is 32 FPS.
At 3840x2160, the Low preset averages 95 FPS, representing a 71 FPS drop from 1440p Low. Medium settings average 85 FPS, with a range of 72 to 97. High settings average 58 FPS, and Ultra averages 39 FPS. The preset gaps narrow further: Low to Medium is 10 FPS, Medium to High is 27 FPS, and High to Ultra is 19 FPS. The 4K Ultra result of 39 FPS is the lowest measured average in the entire dataset, and the 4K High result of 58 FPS is the only other sub-60 FPS average.
CPU Role
The AMD Ryzen 9 9900X3D, featuring 12 cores and 24 threads on the Zen 5 architecture (Granite Ridge), provides substantial processing headroom for Archeage. Its base clock of 4.40 GHz and boost clock of 5.50 GHz, combined with a 128 MB L3 cache, deliver strong single-thread performance that is critical for an MMORPG's game logic and rendering thread. The CPU's 3DMark single-thread score of 1269 and Passmark single-thread score of 4646 place it at the 91st percentile among all CPUs, and its Cinebench R23 single-core score of 6739 confirms its capability for lightly-threaded workloads.
The multi-threaded results show equally robust performance: Cinebench R23 multicore scores 47737, Geekbench multicore scores 22884, and 3DMark max threads reaches 13795. The Passmark multithread score of 56154 and the CPU's average benchmark score of 54762 indicate that the 9900X3D sits in a competitive position, with its nearest rival the Intel Core Ultra 5 245KF at a 0.6% higher average score and the Intel Core i7-14700F at 2.1% lower.
In Archeage, the CPU's role becomes most apparent at 1080p Low, where the 247 FPS average suggests the rendering pipeline is not fully GPU-bound. The CPU's 24 threads allow it to handle game server communications, physics, and AI calculations simultaneously without bottlenecking the GPU. The 128 MB L3 cache is particularly beneficial for MMORPGs, which often have large working sets of game state data that benefit from fast on-die storage. The 89.6 GB/s memory bandwidth from dual-channel DDR5 support ensures that the CPU can feed data to the GPU without starvation, though at 4K the GPU's own 504.2 GB/s bandwidth becomes the more relevant constraint.
How This Combo Ranks
This AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 4070 Ti combination ranks 445th out of 3708 tested combos for Archeage, placing it in the top 12% of all configurations. This ranking reflects the system's ability to deliver high frame rates across most settings and resolutions, with the primary exception being 4K Ultra where the 39 FPS average falls below the 60 FPS threshold.
The GPU's position at the 84th percentile among all GPUs, with an average benchmark score of 44795, places it slightly below the RTX 5090 Mobile (0.8% lower average score) and AMD Radeon Pro 5500 XT (1.3% lower), while the RTX A6000 sits 1.6% higher. The CPU's 91st percentile ranking, with an average benchmark score of 54762, shows it outperforming the Intel Core Ultra 5 245K by 1.3% and the Intel Xeon 6505P by 2%, while sitting 0.6% below the Intel Core Ultra 5 245KF.
The rank of 445 suggests that while this combination is strong, it is not at the very top of the leaderboard, indicating that other pairings with more powerful GPUs or CPUs achieve higher frame rates in Archeage. The data shows that the 4K Ultra result of 39 FPS and the 4K High result of 58 FPS are the weakest points, suggesting that players seeking 4K performance would need to step up to a higher-tier GPU. Conversely, the 1080p and 1440p results are generally strong, with the 1440p High average of 101 FPS and 1080p Medium average of 220 FPS providing smooth experiences for most display configurations.
Hardware Specifications
AMD Ryzen 9 9900X3D
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 4070 Ti in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 95.0 |
| 3840x2160 | Medium | 85.0 |
| 3840x2160 | High | 58.0 |
| 3840x2160 | Ultra | 39.0 |
| 2560x1440 | Low | 166.0 |
| 2560x1440 | Medium | 148.0 |
| 2560x1440 | High | 101.0 |
| 2560x1440 | Ultra | 69.0 |
| 1920x1080 | Low | 247.0 |
| 1920x1080 | Medium | 220.0 |
| 1920x1080 | High | 149.0 |
| 1920x1080 | Ultra | 102.0 |
Archeage with Ryzen 9 9900X3D + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RTX 4070 Ti + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 9 9900X3D + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.