Archeage

The AMD Ryzen 7 5700G paired with the Intel Arc B580 delivers a playable, though not flawless, Archeage experience. The data shows a system that is clearly capable of high frame rates at standard resolutions, but one that struggles to maintain smooth performance at 4K with demanding settings. This analysis breaks down the measured results, offering a practical look at what this combination can achieve.

Resolution Scaling

The performance drop from 1080p to 4K is severe, highlighting the GPU as the primary bottleneck at higher resolutions. At 1080p with Low settings, the combo achieves an average of 124.3 FPS. Moving to 1440p at the same settings, the average falls to 83.4 FPS, a 33% reduction in frame rate. The jump to 4K is even more punishing, with the average plummeting to 48.1 FPS, which is a 61% drop from the 1080p result. This scaling pattern is characteristic of a system where the graphics card's rendering load becomes the limiting factor as pixel count increases.

The trend is consistent across all settings presets. With High settings, the frame rate goes from 77.8 FPS at 1080p, to 48.1 FPS at 1440p, and finally to 29.4 FPS at 4K. The 4K High result is just barely above the threshold for acceptable playability, indicating that this resolution is not a realistic target for a smooth experience with this hardware. The data clearly shows that the Intel Arc B580, while competent at 1080p and 1440p, does not have the raw throughput to maintain high frame rates at 4K in this MMORPG. For users prioritizing high refresh rates, 1080p is the only resolution where the system can truly stretch its legs.

CPU Role

The AMD Ryzen 7 5700G provides a solid foundation for this workload, with its 8 cores and 16 threads being more than sufficient for Archeage's demands. The benchmark data for the CPU is strong, with a Cinebench R23 multicore score of 20755, placing it in the 83rd percentile against all CPUs. Its single-threaded performance, as shown by a 3DMark single-thread score of 899, is also respectable, ensuring that the game's primary logic thread is well-served. The CPU's capabilities are not the limiting factor in this pairing, as evidenced by the resolution scaling.

The fact that frame rates drop so drastically with resolution increases points directly to the GPU being the bottleneck. The CPU is able to feed the graphics card with enough data at 1080p, where the 124.3 FPS Low result shows it is not holding the system back. Even at 1440p, the CPU is likely keeping up, as the 83.4 FPS Low result is still a high frame rate. It is only when the GPU's rendering workload becomes immense at 4K that the system's performance collapses, confirming that the Intel Arc B580 is the component that determines the frame rate ceiling. The 5700G is a capable partner, providing the necessary processing power without becoming a constraint until the GPU is overwhelmed.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Archeage?

A: The measured data indicates that 1080p is the optimal resolution. It is the only resolution where the system achieves consistently high frame rates across all settings, from 124.3 FPS on Low to 49.8 FPS on Ultra, allowing for a smooth experience even with maximum visual fidelity.

Q: Is 4K gaming viable with this setup?

A: No. The performance at 4K is too low for a consistent experience. The best result at 4K is 48.1 FPS on Low settings, and this drops to a marginal 29.4 FPS on High and an unplayable 17.6 FPS on Ultra. The GPU lacks the power to handle this resolution effectively in Archeage.

Q: How does the Arc B580 compare to a card like the RTX 4060?

A: Based on the average benchmark scores, the Intel Arc B580 is very closely matched with the NVIDIA GeForce RTX 4060. The data shows the RTX 4060 has an average score of 23181, which is only 0.7% higher than the Arc B580's score, indicating they are performance peers in general compute tasks.

Q: Is the Ryzen 7 5700G a strong processor for gaming?

A: Yes. The Ryzen 7 5700G is a strong processor, with its average benchmark score of 25626 placing it in the 83rd percentile of all CPUs. Its 8-core, 16-thread configuration and solid single-core performance ensure it won't bottleneck a mid-range graphics card like the Arc B580 in most gaming scenarios.

Q: What is the worst-performing setting preset at 1080p?

A: The Ultra preset is the worst performer at 1080p, delivering an average of 49.8 FPS. This is significantly lower than the High preset's 77.8 FPS, suggesting that the jump to Ultra settings has a disproportionately high performance cost.

Q: What kind of performance difference is there between Medium and Low settings at 1440p?

A: The difference is noticeable. The Low preset achieves an average of 83.4 FPS, while the Medium preset achieves 75.6 FPS. This represents a 9.4% performance advantage for the Low preset, which may be a worthwhile trade-off for players seeking higher refresh rates.

Settings Recommendations

For the best balance of visual quality and performance, the High preset at 1080p is the standout choice. It delivers an average of 77.8 FPS, which is well within the smooth range for most monitors, while still providing a significant visual upgrade over the Medium preset. The data shows that the jump from Medium to High costs about 32 FPS (from 109.7 to 77.8), but the visual improvements are typically worth it for a game like Archeage. If you have a high refresh rate monitor, the Medium preset at 1080p is an excellent option, offering a very playable 109.7 FPS average.

At 1440p, the High preset becomes a compromise. It produces an average of 48.1 FPS, which is playable but not ideal for fast-paced combat. The Medium preset at 1440p provides a much better experience at 75.6 FPS, and is the recommended choice for this resolution. The Low preset at 1440p is also viable at 83.4 FPS if maximum frame rates are the priority. The Ultra preset should be avoided entirely at every resolution, as its performance cost is too high; even at 1080p it only manages 49.8 FPS, which is lower than the High preset at 1440p. For 4K, only the Low preset is playable, but at 48.1 FPS it is not a recommended experience.

How This Combo Ranks

This specific combination of the AMD Ryzen 7 5700G and Intel Arc B580 ranks 1346 out of 1727 tested combos in Archeage. This places it in the lower 22% of all hardware pairings evaluated, indicating that while it can run the game, many other systems deliver superior performance. This ranking is a reflection of the GPU's limitations at higher resolutions and the game's demanding Ultra preset, which drags down the overall average across all tested scenarios. The system is clearly capable at 1080p, but the 4K results and the poor Ultra performance hurt its overall standing.

The ranking is a holistic measure, and the system's performance in the more common 1080p and 1440p scenarios is more competitive than the raw rank suggests. The CPU is a strong performer, but the Arc B580, while a good match for the 5700G, is not a high-end card. The results show that this is a mainstream combo that excels at 1080p and handles 1440p well with adjusted settings, but it is not designed for 4K gaming. Users should interpret the rank as a warning against pushing this system to its limits at 4K, rather than as a statement on its general playability.

Measured FPS Breakdown

The following data represents the measured average frame rates for this hardware combination.

1920x1080:

• Low: 124.3 FPS
• Medium: 109.7 FPS
• High: 77.8 FPS
• Ultra: 49.8 FPS

2560x1440:

• Low: 83.4 FPS
• Medium: 75.6 FPS
• High: 48.1 FPS
• Ultra: 36.0 FPS

3840x2160:

• Low: 48.1 FPS
• Medium: 44.0 FPS
• High: 29.4 FPS
• Ultra: 17.6 FPS