Thief
This combination provides smooth gameplay with an average of 96 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 45 | 59 | 77 |
| 1440p QHD | 72 | 76 | 100 | 131 |
| 1080p Full HD | 105 | 111 | 145 | 191 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The Intel Core Ultra 7 270K Plus is a 24-core, 24-thread desktop processor based on the Arrow Lake Refresh architecture, built on a 3 nm process by TSMC. Its base clock is 3.70 GHz, with a boost clock of 5.50 GHz, and it carries a TDP of 125 W. In the context of Thief, a 2014 stealth title, this processor provides substantial headroom. The benchmark data shows that at 1080p with Low settings, the combo achieves 191 FPS, which is nearly double the 105 FPS seen at Ultra settings. This scaling indicates that at lower resolutions and settings, the CPU is capable of feeding the GPU far more frames than the graphics hardware can render, but the game’s engine does not appear to be heavily threaded, as the 24-core count likely provides no tangible benefit over a processor with fewer, faster cores for this title. The processor’s single-thread performance, as evidenced by a Cinebench R23 single-core score of 2439, is more relevant to Thief’s frame pacing than its multi-core might.
The CPU’s 36 MB of shared L3 cache and dual-channel DDR5 memory support with a bandwidth of 115.2 GB/s are notable, but the measured FPS deltas between settings suggest that the game’s bottleneck shifts quickly to the GPU as graphical load increases. In the nearestRivals data, the Core Ultra 7 270K Plus has an average benchmark score of 93785, placing it within 0% of the Intel Xeon 6520P, -1.5% of the AMD EPYC 4564P, -1.9% of the AMD EPYC 9175F, and -2.1% of the AMD EPYC 4565P. These rival comparisons are based on synthetic workloads, not gaming, and the small deltas indicate that for Thief, the CPU choice among these high-end parts would yield negligible differences in the measured FPS, as the game is not designed to exploit the massive parallel throughput these chips offer. The CPU’s 96th percentile ranking among all CPUs further underscores its capability, but the practical ceiling in this game is dictated by the GPU and the engine’s single-threaded nature.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 3060 Ti, based on the GA104 chip and Ampere architecture, is the primary driver of the measured results. It features 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. The GPU’s base clock is 1410 MHz, with a boost clock of 1665 MHz, and its memory operates at an effective 14 Gbps. With 4864 shading units, 152 TMUs, and 80 ROPs, the RTX 3060 Ti offers a pixel rate of 133.2 GPixel/s and a texture rate of 253.1 GTexel/s. For Thief, which was released in 2014, the GPU’s raw rasterization power is more critical than its ray tracing or tensor cores, as the game does not utilize DirectX 12 Ultimate features (the GPU supports DirectX 12 Ultimate, but the title predates widespread adoption of such features).
The data shows a clear GPU-bound pattern at higher resolutions. At 4K Ultra, the average FPS drops to 43, while at 1080p Ultra it reaches 105 FPS. This 59% reduction in performance from 1080p to 4K at Ultra settings is consistent with the GPU’s memory bandwidth and fill rate becoming the limiting factors. The 8 GB VRAM capacity is sufficient for Thief even at 4K Ultra, as the game’s textures from 2014 are unlikely to exceed that threshold, but the GPU’s overall compute throughput (16.20 TFLOPS FP32) is what constrains performance. The GPU’s average benchmark score is 16129, placing it in the 59th percentile of all GPUs, and its nearestRivals include the AMD Radeon RX 9060 (0.7% higher average score), AMD Radeon Pro 5600M (-1.4%), AMD Radeon RX 5700 XT (-1.4%), and AMD Radeon R9 370X (1.7%). These small deltas suggest that the RTX 3060 Ti is competitively positioned, but in Thief, the performance is what it is—solid for 1080p and 1440p, but struggling to maintain playable rates at 4K with high presets.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
Examining the measured FPS across resolutions reveals a consistent scaling pattern that identifies the GPU as the primary bottleneck, with the CPU providing diminishing returns as resolution increases. At Low settings, the average FPS drops from 191 at 1080p to 131 at 1440p (a 31.4% decrease) and further to 77 at 4K (a 41.2% decrease from 1440p). This steep decline indicates that even at the lowest graphical preset, the GPU’s rendering pipeline is overwhelmed by the pixel count. The 1080p Low result of 191 FPS suggests the CPU can handle the game’s logic and draw calls without issue, but the GPU cannot sustain that frame rate as resolution climbs.
At Medium settings, the pattern is similar but with more pronounced absolute drops: 145 FPS at 1080p, 100 FPS at 1440p (a 31.0% decrease), and 59 FPS at 4K (a 41.0% decrease from 1440p). The min FPS at Medium also scales proportionally, from 123 at 1080p to 85 at 1440p to 50 at 4K, showing that frame pacing remains stable relative to the average. At High settings, the FPS drops from 111 at 1080p to 76 at 1440p (a 31.5% decrease) and to 45 at 4K (a 40.8% decrease from 1440p). At Ultra settings, the pattern holds: 105 FPS at 1080p, 72 FPS at 1440p (a 31.4% decrease), and 43 FPS at 4K (a 40.3% decrease from 1440p).
The consistency of the percentage drops—roughly 31% from 1080p to 1440p and 40-41% from 1440p to 4K—across all settings is a strong indicator that the GPU is the limiting component. If the CPU were the bottleneck, we would expect to see smaller percentage drops at lower settings (where the CPU has more influence) and larger drops at higher settings. The data does not show that; instead, the uniform scaling suggests that the RTX 3060 Ti’s fill rate and bandwidth are the constraints. The CPU’s 24 cores and high boost clock are not the issue; the game simply cannot push more frames through the GPU at higher resolutions.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. At 1080p, all presets deliver playable performance, but the Medium preset stands out as the best balance. It achieves an average of 145 FPS with a minimum of 123 FPS, which is well above the 60 FPS threshold for smooth gameplay. High settings at 1080p offer 111 FPS average, and Ultra offers 105 FPS, but the jump from Medium to High costs 34 FPS (a 23.4% decrease) for what is likely a marginal visual improvement in a game from 2014. Low settings at 1080p reach 191 FPS, but this is unnecessary for most displays and sacrifices visual fidelity for no practical benefit.
At 1440p, Medium is again the recommended preset. It delivers an average of 100 FPS with a minimum of 85 FPS, which remains comfortably above 60 FPS. High settings at 1440p drop to 76 FPS, and Ultra drops to 72 FPS, both of which are still playable but with less headroom for demanding scenes. Low settings at 1440p reach 131 FPS, but the visual compromise is significant. For a stealth game where environmental detail and lighting are crucial for immersion, Medium provides the best experience without dipping below 60 FPS.
At 4K, the situation is more constrained. Medium settings yield an average of 59 FPS with a minimum of 50 FPS, which is borderline for smooth gameplay. High settings drop to 45 FPS, and Ultra drops to 43 FPS, both of which are below the ideal 60 FPS target. Low settings at 4K reach 77 FPS, which is the only preset that provides a comfortably playable experience at this resolution. However, the visual quality at Low is a significant downgrade. If 4K is a priority, Medium is the highest preset that approaches playability, but users should expect occasional dips below 60 FPS. For the best experience across all resolutions, Medium is the recommended preset, as it offers the highest settings that maintain an average above 60 FPS at 1080p and 1440p, and is the only preset above Low that comes close at 4K.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the Intel Core Ultra 7 270K Plus and the NVIDIA GeForce RTX 3060 Ti ranks 1241 out of 2851 tested combos in Thief. This places it in the 43.5th percentile of all configurations tested for this game, meaning it outperforms roughly 43.5% of other combos but is outclassed by the majority. Given the CPU’s high synthetic benchmark standing (96th percentile among all CPUs) and the GPU’s mid-range position (59th percentile among all GPUs), this ranking is indicative of a system where the GPU is the limiting factor. The CPU is far more powerful than the GPU relative to their respective market positions, and in a game like Thief that is not heavily multithreaded, the GPU’s performance dictates the overall result.
The rank of 1241 suggests that many other tested combos feature more powerful GPUs paired with slower CPUs, which is a more balanced or GPU-heavy configuration for gaming. For instance, a combo with a mid-range CPU and a higher-tier GPU would likely rank higher in Thief despite having a weaker processor, because the game’s frame rate is primarily limited by graphics processing. The data supports this interpretation: the FPS at 4K Ultra (43) is less than half of the FPS at 1080p Low (191), showing that the GPU cannot keep up with the CPU’s output. The combo’s ranking is not a reflection of the CPU’s capability but rather of the GPU’s mid-range positioning. In the context of all tested combos, the 270K Plus + RTX 3060 Ti is a competent but not top-tier setup for this title, with the GPU acting as the bottleneck that prevents it from breaking into the upper quartile of rankings.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the Low preset achieves an average of 191 FPS, with no minimum or maximum reported. The Medium preset at 1080p yields an average of 145 FPS, with a minimum of 123 FPS and a maximum of 167 FPS. High settings at 1080p produce an average of 111 FPS, and Ultra settings produce an average of 105 FPS, with neither reporting min or max values. The spread from Low to Ultra at 1080p is 86 FPS, or a 45.0% reduction in performance from the lowest to highest preset.
At 2560x1440, the Low preset delivers an average of 131 FPS, with no min or max reported. Medium settings at 1440p achieve an average of 100 FPS, with a minimum of 85 FPS and a maximum of 115 FPS. High settings at 1440p result in an average of 76 FPS, and Ultra settings yield an average of 72 FPS. The spread from Low to Ultra at 1440p is 59 FPS, or a 45.0% reduction, which is consistent with the 1080p scaling pattern. The minimum FPS at Medium (85) is above the 60 FPS threshold, indicating stable frame pacing.
At 3840x2160, the Low preset achieves an average of 77 FPS, with no min or max reported. Medium settings at 4K deliver an average of 59 FPS, with a minimum of 50 FPS and a maximum of 67 FPS. High settings at 4K produce an average of 45 FPS, and Ultra settings produce an average of 43 FPS. The spread from Low to Ultra at 4K is 34 FPS, or a 44.2% reduction, which is slightly less than at lower resolutions due to the absolute FPS values compressing. The minimum FPS at Medium (50) is below the 60 FPS target, indicating that 4K Medium is not a fully smooth experience. The data shows that the RTX 3060 Ti is best suited for 1080p and 1440p gaming, with 4K requiring a reduction to Low settings for consistent 60+ FPS performance.
FAQ
Q: What is the maximum average FPS achievable at 1080p with this combo?
A: The highest average FPS at 1080p is 191, achieved with the Low settings preset. The Medium preset offers 145 FPS, High offers 111 FPS, and Ultra offers 105 FPS.
Q: How does the combo perform at 4K with the Ultra preset?
A: At 4K with Ultra settings, the average FPS is 43. This is the lowest average FPS recorded across all tested resolutions and settings, indicating that the RTX 3060 Ti is not capable of delivering smooth performance at this configuration.
Q: Is the CPU or GPU the limiting factor in this game?
A: The data indicates the GPU is the limiting factor. The average FPS drops by approximately 31% from 1080p to 1440p and by 40-41% from 1440p to 4K across all settings. This uniform scaling pattern is characteristic of a GPU bottleneck, as the CPU’s performance headroom (evidenced by the 191 FPS at 1080p Low) is not the constraint.
Q: What is the best settings preset for a 60 FPS experience at 1440p?
A: The Medium preset at 1440p delivers an average of 100 FPS with a minimum of 85 FPS, which is well above the 60 FPS target. High settings at 1440p drop to 76 FPS, which is still above 60, but Medium provides more headroom for demanding scenes.
Q: How does this combo rank against all other tested combinations in Thief?
A: This combo ranks 1241 out of 2851 tested combinations, placing it in the 43.5th percentile. This ranking is primarily due to the GPU’s mid-range performance, as the CPU is in the 96th percentile of all CPUs.
Q: Does the CPU’s 24-core count provide any advantage in this game?
A: No, the benchmark results do not indicate any advantage from the 24-core configuration. The game’s performance scales consistently with GPU load, and the high FPS at 1080p Low (191) suggests that even a fraction of the CPU’s cores would suffice. The game is not designed to utilize such a high thread count.
Hardware Specifications
Intel Core Ultra 7 270K Plus
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 3060 Ti in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 77.0 |
| 3840x2160 | Medium | 59.0 |
| 3840x2160 | High | 45.0 |
| 3840x2160 | Ultra | 43.0 |
| 2560x1440 | Low | 131.0 |
| 2560x1440 | Medium | 100.0 |
| 2560x1440 | High | 76.0 |
| 2560x1440 | Ultra | 72.0 |
| 1920x1080 | Low | 191.0 |
| 1920x1080 | Medium | 145.0 |
| 1920x1080 | High | 111.0 |
| 1920x1080 | Ultra | 105.0 |
Thief with iUltra 7 270K Plus + Other GPUs
See how Thief performs with the same CPU but different graphics cards.
Thief with RTX 3060 Ti + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with iUltra 7 270K Plus + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.