Fivem

The Intel Core Ultra 7 270K Plus paired with the NVIDIA GeForce RTX 3060 Ti delivers a playable, though at times constrained, experience in Fivem. The benchmark data shows a system that scales predictably with resolution, but the relationship between CPU and GPU load becomes the defining factor in determining performance ceilings, particularly at lower resolutions where the processor's influence is most apparent.

Resolution Scaling

The measured FPS data reveals a clear and consistent scaling pattern as resolution increases from 1080p to 4K. At 1080p with Low settings, the system produces an average of 196 FPS. Moving to 1440p drops that figure to 129 FPS, a reduction of 67 FPS. At 4K, the same Low settings yield an average of 72 FPS, which represents a 124 FPS decline from the 1080p baseline. This steep drop-off indicates that the RTX 3060 Ti becomes the primary limiting factor as pixel count rises, with the GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth struggling to maintain the high frame rates seen at lower resolutions.

The scaling pattern is consistent across all settings presets. With High settings, the system delivers 124 FPS at 1080p, 81 FPS at 1440p, and 45 FPS at 4K. The Medium preset shows 155 FPS at 1080p, 102 FPS at 1440p, and 56 FPS at 4K. Ultra settings produce 96 FPS at 1080p, 63 FPS at 1440p, and 35 FPS at 4K. The percentage drop from 1080p to 4K is roughly 63-64% across all settings, suggesting that the performance bottleneck shifts uniformly to the GPU regardless of the quality preset selected.

The fact that the 1440p results sit almost exactly halfway between the 1080p and 4K figures in most cases points to a GPU that is being pushed harder as resolution climbs. However, the relatively high frame rates at 1080p, especially on Low settings where the system averages 196 FPS, indicate that the CPU is capable of feeding the GPU adequately at lower pixel counts. The data suggests that at 1080p, the system is likely CPU-bound in certain scenarios, while at 4K, the GPU's compute and memory limitations dominate the performance picture.

CPU Role

The Intel Core Ultra 7 270K Plus is a 24-core, 24-thread processor based on the Arrow Lake Refresh architecture, built on a 3 nm process by TSMC. It operates at a base clock of 3.70 GHz and boosts up to 5.50 GHz, with 36 MB of shared L3 cache. In Fivem, a multiplayer title that often involves numerous entities and scripts, the CPU's multi-threaded capabilities play a significant role in maintaining consistent frame rates.

The CPU's benchmark scores are substantial. It achieves a Cinebench R23 multi-core score of 44,253 and a single-core score of 2,439. In Passmark tests, it records a multi-thread score of 68,574 and a single-thread score of 5,068. These figures place the processor in the 96th percentile among all CPUs, indicating strong performance relative to the broader market. However, the nearest rivals listed in the data are server-class processors: the Intel Xeon 6520P (0% delta), AMD EPYC 4564P (-1.5% delta), AMD EPYC 9175F (-1.9% delta), and AMD EPYC 4565P (-2.1% delta). This comparison suggests that while the Ultra 7 270K Plus is a high-tier desktop chip, it sits in a performance bracket that includes workstation and server parts.

In Fivem, the CPU's role is most evident at 1080p where the system achieves 196 FPS on Low settings. That figure is 67 FPS higher than the 1440p Low result, and the gap between Low and Medium at 1080p is 41 FPS. The fact that the system can push past 190 FPS at 1080p indicates that the CPU is not a hard bottleneck at that resolution. The data shows the processor's multi-threading and high boost clock are sufficient to drive the RTX 3060 Ti to high frame rates in less demanding scenarios.

However, the CPU's performance in Fivem should be considered in the context of its 24 threads. Multiplayer servers can be CPU-intensive due to the number of players and scripts, but the benchmark results do not show any specific CPU-related anomalies such as frame rate collapses at higher settings. The consistent scaling from Low to Ultra suggests that the CPU maintains its throughput even as the GPU workload increases.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is an Ampere-architecture GPU with 4,864 shading units, 152 TMUs, and 80 ROPs. It operates at a base clock of 1,410 MHz and a boost clock of 1,665 MHz, with 8 GB of GDDR6 memory on a 256-bit bus. The memory runs at 1,750 MHz (14 Gbps effective), providing 448.0 GB/s of bandwidth. The GPU's FP32 performance is rated at 16.20 TFLOPS.

In terms of benchmark scores, the RTX 3060 Ti records a Passmark G3D score of 20,349 and a 3DMark Steel Nomad DX12 score of 2,626. It ranks in the 59th percentile among all GPUs, which is notably lower than the CPU's 96th percentile ranking. The nearest rivals include the AMD Radeon RX 9060 (0.7% delta), AMD Radeon Pro 5600M (-1.4% delta), AMD Radeon RX 5700 XT (-1.4% delta), and AMD Radeon R9 370X (1.7% delta). This places the GPU in a mid-range tier relative to the CPU's high-end positioning.

The GPU's role in Fivem is most clearly illustrated by the 4K results. At 4K Ultra settings, the system averages just 35 FPS, which is below what most players would consider smooth. The 4K High preset fares slightly better at 45 FPS, while Medium reaches 56 FPS. Only at 4K Low does the system achieve a playable 72 FPS. These figures show that the 8 GB VRAM and 448.0 GB/s bandwidth are insufficient for high-quality 4K gameplay in this title.

At 1440p, the GPU performs more adequately but still shows limitations. Ultra settings yield 63 FPS, High produces 81 FPS, and Medium reaches 102 FPS. The 1440p results are 30-40% higher than the 4K figures at equivalent settings, which aligns with the pixel count difference. The GPU appears to be the dominant factor in determining performance at these resolutions, as the CPU's high benchmark scores suggest it is not the primary constraint.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. At 1080p, the system is capable of high refresh rate gameplay. The Low preset delivers 196 FPS, Medium produces 155 FPS, High reaches 124 FPS, and Ultra manages 96 FPS. For competitive play on a 144Hz monitor, the Low or Medium presets are the best choices, as they maintain frame rates well above 144 FPS. The High preset is suitable for 120Hz displays, while Ultra provides a good balance for 60-100Hz screens with improved visual quality.

At 1440p, the Medium preset appears to be the sweet spot. It produces an average of 102 FPS with a minimum of 87 FPS and a maximum of 117 FPS, which is smooth for most gameplay scenarios. The High preset at 81 FPS is acceptable for 60-75Hz displays, while Ultra at 63 FPS may be borderline for those who prefer higher refresh rates. The Low preset at 129 FPS is the best option for high refresh rate 1440p monitors, but the visual quality trade-off may be significant for a game like Fivem where visibility can be important.

At 4K, the data clearly shows that the system is not suited for high frame rate gaming. The Low preset at 72 FPS is the only option that approaches a comfortable level of smoothness. Medium at 56 FPS is playable but may experience noticeable frame pacing issues, especially with the minimum of 48 FPS recorded. High at 45 FPS and Ultra at 35 FPS are below the threshold for smooth gameplay and are not recommended for anything other than static screenshots. Players targeting 4K should stick to Low settings or consider lowering the resolution to 1440p for a better experience.

FAQ

Q: What is the best resolution to play Fivem with this hardware?

A: The data indicates that 1440p with Medium settings provides the best balance, yielding an average of 102 FPS with a minimum of 87 FPS. This is smoother than any 4K preset and offers better visual quality than 1080p.

Q: Can this system handle 4K gaming in Fivem?

A: Yes, but only at Low settings, where it averages 72 FPS. The Medium preset drops to 56 FPS, and High and Ultra produce 45 FPS and 35 FPS respectively, which are below comfortable playability thresholds.

Q: How does the CPU compare to its closest rivals?

A: The Intel Core Ultra 7 270K Plus has an average benchmark score of 93,785. It is matched by the Intel Xeon 6520P (0% delta), trails the AMD EPYC 4564P by 1.5%, the AMD EPYC 9175F by 1.9%, and the AMD EPYC 4565P by 2.1%.

Q: What is the GPU's performance ranking relative to other cards?

A: The RTX 3060 Ti sits in the 59th percentile among all GPUs. Its closest rival is the AMD Radeon RX 9060, which is 0.7% faster, while the AMD Radeon Pro 5600M and AMD Radeon RX 5700 XT are 1.4% slower.

Q: Is there a significant frame rate drop between 1080p and 1440p?

A: Yes. At High settings, the average drops from 124 FPS at 1080p to 81 FPS at 1440p, a 43 FPS reduction. At Low settings, the drop is 67 FPS (from 196 to 129).

Q: What frame rate can be expected at 1080p with Ultra settings?

A: The system averages 96 FPS at 1080p with Ultra settings. This is sufficient for a 60Hz or 100Hz display but may not fully utilize a 144Hz monitor.

Measured FPS Breakdown

The following data presents the exact measured average FPS for each resolution and settings combination, as recorded in the benchmark dataset.

3840x2160 (4K):

• Low: 72 FPS average
• Medium: 56 FPS average (minimum 48, maximum 65)
• High: 45 FPS average
• Ultra: 35 FPS average

2560x1440 (1440p):

• Low: 129 FPS average
• Medium: 102 FPS average (minimum 87, maximum 117)
• High: 81 FPS average
• Ultra: 63 FPS average

1920x1080 (1080p):

• Low: 196 FPS average
• Medium: 155 FPS average (minimum 131, maximum 178)
• High: 124 FPS average
• Ultra: 96 FPS average

The data shows a consistent hierarchy across all resolutions, with Low producing the highest frame rates and Ultra the lowest. The Medium preset is the only one with recorded minimum and maximum values, indicating more variable performance. At 4K, the gap between Low and Ultra is 37 FPS, while at 1080p, that same gap is 100 FPS. This widening delta at lower resolutions further emphasizes the GPU-bound nature of the system at higher pixel counts. The overall combo rank in Fivem is 1,461 out of 3,005 tested combinations, placing this specific CPU-GPU pairing in the middle of the pack for this game.