Thief
This combination provides smooth gameplay with an average of 101 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 53 | 56 | 73 | 97 |
| 1440p QHD | 91 | 95 | 115 | 127 |
| 1080p Full HD | 116 | 118 | 130 | 144 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with AMD Ryzen 5 5500X3D + AMD Radeon RX 9070, In-Depth Analysis
The AMD Ryzen 5 5500X3D and AMD Radeon RX 9070 combination delivers a distinctive performance profile in Thief, a 2014 stealth title that proves surprisingly demanding at higher resolutions. The data reveals a system where the CPU’s large cache and the GPU’s raw throughput interact in ways that shift the bottleneck depending on settings and resolution.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor built on the Zen 3 architecture, codenamed Vermeer. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, drawing 105 W TDP. While core counts and clocks are modest by modern standards, the defining feature is the 96 MB shared L3 cache, a massive pool that benefits games with repetitive data access patterns. The processor’s PassMark single-thread score of 2941 and multithread score of 20363 place it at the 85th percentile among all CPUs, indicating solid, above-average capability.
In the context of Thief, the CPU’s role appears secondary to the GPU but not irrelevant. At 1080p Low settings, the combo achieves 144 FPS, suggesting the CPU can feed the GPU adequately even at high frame rates. However, comparing the Low and Ultra settings at 1080p—144 FPS versus 116 FPS—shows only a 28 FPS drop, implying the CPU is not severely strained by the game’s logic even when graphical load increases. The 5500X3D’s nearest rivals in average benchmark score include the AMD Ryzen 5 5600F (0.2% higher), AMD Ryzen AI 7 PRO 450 (0.2% lower), Intel Core Ultra 5 225 (0.2% higher), and Intel Core i9-12900T (0.3% lower). These deltas are negligible, meaning the 5500X3D’s performance in general benchmarks is essentially tied with those parts, but its 3D V-Cache advantage may manifest specifically in gaming scenarios.
The data suggests that Thief is not a CPU-bound title for this processor. At 4K Ultra, the average FPS is 53, which is only 3 FPS lower than the 1080p Ultra result of 116 FPS when scaled proportionally—wait, that’s incorrect. Actually, the 4K Ultra is 53 FPS versus 116 at 1080p Ultra, a substantial 63 FPS difference. This gap indicates the GPU becomes the limiting factor at higher resolutions. The CPU’s job is to maintain a consistent frame delivery, and the PassMark physics score of 2282 suggests it can handle the game’s physics calculations without bottlenecking the GPU at lower resolutions. The 5500X3D’s 96 MB L3 cache likely helps maintain stable frame pacing, as evidenced by the Medium settings at 1440p, which shows a minimum FPS of 97 and maximum of 132, a range that indicates consistent performance without major stutters.
Settings Recommendations — which preset gives the best experience per the measured rows
Analyzing the measured FPS across settings and resolutions, the Medium preset emerges as the most balanced choice for this hardware combo. At 1080p, Medium delivers an average of 130 FPS with a minimum of 110 FPS and maximum of 149 FPS. This provides a smooth, high-refresh-rate experience while maintaining visual fidelity above Low. The jump from Low to Medium at 1080p costs only 14 FPS (144 to 130), which is a reasonable trade for improved graphics.
At 1440p, Medium yields an average of 115 FPS with a range of 97 to 132 FPS. This is still well above the 60 FPS threshold for smooth gameplay, and the 97 FPS minimum ensures no significant dips. The High preset at 1440p drops to 95 FPS average, which is playable but closer to the edge. The Ultra preset at 1440p averages 91 FPS, which begins to approach the point where frame drops might become noticeable on standard 60 Hz displays.
For 4K, the Medium preset is the only viable option for a consistently playable experience. It averages 73 FPS with a minimum of 62 FPS and maximum of 84 FPS. The 62 FPS minimum is just above the 60 FPS target, making it playable but with occasional dips. High at 4K averages 56 FPS, which is below the 60 FPS threshold and may result in noticeable judder. Low at 4K achieves 97 FPS, but the visual compromise is severe. Ultra at 4K averages 53 FPS, which is too low for smooth gameplay.
The data clearly indicates that Medium is the sweet spot for this combo across all resolutions. It offers the best balance between visual quality and frame rate, with the 4K Medium result of 73 FPS being particularly impressive for a 2014 title. The 1440p Medium at 115 FPS is ideal for high-refresh-rate monitors, while 1080p Medium at 130 FPS is excellent for competitive play.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS scaling from 1080p to 4K reveals a classic GPU-bound scenario. At Low settings, the average FPS drops from 144 at 1080p to 127 at 1440p, then to 97 at 4K. This represents a 33% reduction from 1080p to 4K (144 to 97). At Medium settings, the drop is from 130 at 1080p to 115 at 1440p, then to 73 at 4K—a 44% reduction. At High settings, the drop is from 118 at 1080p to 95 at 1440p, then to 56 at 4K—a 53% reduction. At Ultra settings, the drop is from 116 at 1080p to 91 at 1440p, then to 53 at 4K—a 54% reduction.
The pattern shows that higher settings exacerbate the resolution scaling penalty. This is because the GPU’s workload increases disproportionately with both resolution and graphical complexity. The RX 9070 has 16 GB of GDDR6 memory on a 256-bit bus with 644.6 GB/s bandwidth, which is ample for 4K textures. The GPU’s boost clock of 2520 MHz and 3584 shading units provide substantial compute power, but Thief’s rendering engine appears to be heavily pixel-bound at 4K.
The fact that Low settings at 4K (97 FPS) outpaces Ultra at 1440p (91 FPS) indicates that resolution has a larger impact on performance than settings. This suggests the GPU’s pixel fill rate is the limiting factor at 4K, rather than its shading or texture throughput. The RX 9070’s pixel rate is 322.6 GPixel/s, which is substantial but still constrained by the 8.3 million pixels in a 4K frame. The 1080p to 1440p scaling is more moderate, with FPS drops of 17, 15, 23, and 25 for Low, Medium, High, and Ultra respectively, indicating that the GPU remains capable at these resolutions.
How This Combo Ranks — use comboRankInGame vs other tested combos
The AMD Ryzen 5 5500X3D + AMD Radeon RX 9070 combo ranks 1072 out of 2851 tested combinations in Thief. This places it in the 62nd percentile of all combos, meaning it outperforms roughly 62% of systems tested in this game. This ranking is somewhat surprising given the powerful GPU, but it reflects the game’s age and the fact that many newer CPUs with higher single-thread performance may handle the game’s logic more efficiently.
The combo’s rank of 1072 suggests that while the RX 9070 is a high-end GPU, the 5500X3D’s 6-core, 12-thread configuration and 3.00 GHz base clock are not exceptional for this title. The CPU’s PassMark single-thread score of 2941 is decent but not top-tier, and Thief may rely more on single-core performance than the large L3 cache can compensate for. The combo’s position in the middle of the pack indicates that there are many other CPU-GPU pairings that achieve better results, likely with CPUs that have higher clock speeds or newer architectures.
However, the ranking does not tell the whole story. The 62nd percentile means this combo is in the upper half of tested systems, and the measured FPS data shows it can achieve 144 FPS at 1080p Low and 73 FPS at 4K Medium, which are respectable figures. The ranking is influenced by the fact that Thief is a 2014 game, and many modern high-end CPUs may not offer significant advantages in this older title. The combo’s performance is more than adequate for a smooth experience at most settings, even if it doesn’t top the charts.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 9070 is built on the RDNA 4.0 architecture with the Navi 48 chip, manufactured on TSMC’s 4 nm process. It features 53,900 million transistors on a 357 mm² die, with 3584 shading units, 224 TMUs, and 128 ROPs. The GPU operates at a base clock of 1330 MHz, a game clock of 2070 MHz, and a boost clock of 2520 MHz. Memory is 16 GB of GDDR6 on a 256-bit bus, running at 2518 MHz (20.1 Gbps effective) for a bandwidth of 644.6 GB/s.
In Thief, the GPU’s role is dominant at higher resolutions. The 4K results show a clear scaling pattern: Low at 97 FPS, Medium at 73 FPS, High at 56 FPS, and Ultra at 53 FPS. The drop from Low to Ultra at 4K is 44 FPS, indicating that the game’s higher settings introduce significant shading and texture complexity that taxes the GPU. The RX 9070’s FP32 performance of 36.13 TFLOPS is substantial, but Thief’s rendering pipeline appears to be bound by fill rate and memory bandwidth rather than raw compute.
The 16 GB VRAM is more than sufficient for Thief at any resolution, as the game’s textures are unlikely to exceed 8 GB even at 4K Ultra. The GPU’s 128 ROPs provide a pixel rate of 322.6 GPixel/s, which is the likely bottleneck at 4K. The texture rate of 564.5 GTexel/s is also high, but the game’s pixel shader complexity may limit performance. The RX 9070’s nearest rivals in average benchmark score include the NVIDIA GeForce GTX TITAN Z (0.6% higher), AMD Radeon RX 6800S (0.8% lower), NVIDIA GeForce RTX 3080 Mobile (1.1% higher), and NVIDIA GeForce RTX 2080 SUPER (1.2% lower). These deltas are small, but the RX 9070’s actual in-game performance may differ due to driver optimizations and architecture differences.
FAQ
*Q: What is the best resolution and settings combo for this hardware in Thief?*
A: The data shows 1440p Medium as the optimal balance, achieving 115 FPS average with a minimum of 97 FPS. This provides smooth gameplay while maintaining visual quality. For 4K, Medium at 73 FPS average is the highest playable option.
Q: Does the CPU bottleneck the GPU at any resolution?
A: Based on the FPS scaling, the CPU is not the primary bottleneck. At 1080p Low, the combo reaches 144 FPS, but the 1080p Ultra average of 116 FPS is close, suggesting the GPU handles most of the load. At 4K, the CPU’s role diminishes further as the GPU becomes the clear limiting factor.
*Q: How does this combo compare to other CPU-GPU pairings in Thief?*
A: The combo ranks 1072 out of 2851 tested combinations, placing it in the 62nd percentile. This indicates it outperforms a majority of systems but is not at the top tier, likely due to the CPU’s moderate single-thread performance.
*Q: Is the RX 9070’s 16 GB VRAM sufficient for Thief at 4K Ultra?*
A: Yes, the 16 GB VRAM is more than adequate. The 4K Ultra average FPS of 53 is limited by the GPU’s pixel fill rate, not memory capacity. The game’s textures would not exceed the available VRAM even at the highest settings.
Q: What is the frame time consistency at Medium settings?
A: At 1440p Medium, the minimum FPS is 97 and maximum is 132, yielding a 35 FPS range. At 4K Medium, the range is 62 to 84 FPS, a 22 FPS span. These ranges indicate stable frame delivery without major stutters.
*Q: How does the CPU’s 96 MB L3 cache benefit Thief?*
A: The large L3 cache helps maintain consistent frame pacing by storing frequently accessed game data. This is evidenced by the Medium settings at 1440p, where the minimum FPS of 97 is close to the average of 115, suggesting minimal cache misses cause performance dips.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
1920x1080:
- Low: average 144 FPS
- Medium: average 130 FPS, minimum 110 FPS, maximum 149 FPS
- High: average 118 FPS
- Ultra: average 116 FPS
2560x1440:
- Low: average 127 FPS
- Medium: average 115 FPS, minimum 97 FPS, maximum 132 FPS
- High: average 95 FPS
- Ultra: average 91 FPS
3840x2160:
- Low: average 97 FPS
- Medium: average 73 FPS, minimum 62 FPS, maximum 84 FPS
- High: average 56 FPS
- Ultra: average 53 FPS
The data shows a consistent pattern where Medium settings provide the most stable frame rates across all resolutions, with the minimum FPS values recorded only for Medium presets. At 1080p, the difference between Low and Ultra is 28 FPS, while at 1440p it is 36 FPS, and at 4K it is 44 FPS. This increasing gap with resolution confirms that the GPU’s workload scales more steeply with resolution than with settings. The 4K Medium result of 73 FPS is particularly notable, as it demonstrates the RX 9070’s capability to handle 4K gaming in this title without needing to drop to Low settings. The 1080p Low result of 144 FPS suggests the CPU can push high frame rates when the GPU is not heavily loaded, but the diminishing returns at higher settings indicate that the GPU is the primary performance limiter in most scenarios.
Hardware Specifications
AMD Ryzen 5 5500X3D
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500X3D + AMD Radeon RX 9070 in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 97.0 |
| 3840x2160 | Medium | 73.0 |
| 3840x2160 | High | 56.0 |
| 3840x2160 | Ultra | 53.0 |
| 2560x1440 | Low | 127.0 |
| 2560x1440 | Medium | 115.0 |
| 2560x1440 | High | 95.0 |
| 2560x1440 | Ultra | 91.0 |
| 1920x1080 | Low | 144.0 |
| 1920x1080 | Medium | 130.0 |
| 1920x1080 | High | 118.0 |
| 1920x1080 | Ultra | 116.0 |
Thief with Ryzen 5 5500X3D + Other GPUs
See how Thief performs with the same CPU but different graphics cards.
Thief with RX 9070 + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with Ryzen 5 5500X3D + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.