Fivem

The AMD Ryzen 5 5500X3D paired with the AMD Radeon RX 9070 delivers a highly playable experience in Fivem, with the data showing a clear and consistent progression of frame rates as resolution scales down. This combination demonstrates that the GPU is the primary scaling factor, while the CPU’s 3D V-Cache provides a robust foundation for the game’s simulation-heavy multiplayer load.

Resolution Scaling

The measured FPS data reveals a steep and predictable decline in performance as resolution increases, which is typical for a GPU-bound title. At 1080p with Low settings, the combo achieves an average of 246 FPS. Moving to 1440p drops that figure to 162 FPS, a 34% reduction. At 4K with the same Low settings, the average falls to 90 FPS, which is a 63% reduction from the 1080p baseline. This pattern confirms that the RX 9070 is the limiting component for raw pixel throughput, as the frame rate drops are directly proportional to the increase in pixel count.

The scaling behavior shifts slightly when looking at higher quality presets. At Ultra settings, the 1080p average is 120 FPS. This falls to 79 FPS at 1440p (a 34% decrease) and then to 44 FPS at 4K (a 63% decrease from 1080p). The consistent percentage drops across different settings indicate that the game’s rendering load scales linearly with resolution, and the GPU’s compute and memory bandwidth are the primary constraints. The fact that the 1080p Ultra score is less than half of the 1080p Low score (120 vs 246 FPS) shows that settings also have a massive impact on the GPU load, but the resolution scaling curve remains steep regardless of the preset.

When comparing the High and Medium presets, the data shows a similar trend. At 1080p, High produces 155 FPS and Medium produces 194 FPS. At 1440p, these numbers are 102 FPS and 128 FPS respectively. At 4K, they are 57 FPS and 71 FPS. The gap between resolutions remains substantial, suggesting that even at lower settings, the RX 9070 is the main bottleneck. The data strongly suggests that for competitive play at high refresh rates, 1080p is the target resolution, while 4K is only viable for a more cinematic experience at lower refresh rates, with the average staying above 60 FPS only on the Low preset.

GPU Role

The AMD Radeon RX 9070, based on the RDNA 4.0 architecture and Navi 48 chip, is the central engine driving the frame rates in this configuration. Its performance percentile of 69th among all GPUs indicates it is a solid mid-to-high-tier performer, and the benchmark results in Fivem reflect that positioning. The card’s 16 GB of GDDR6 memory on a 256-bit bus provides a 644.6 GB/s memory bandwidth, which is more than sufficient for the textures and assets used in Fivem, even at 4K resolution. The data shows no signs of memory capacity throttling, as the performance scaling is consistent and predictable.

The GPU’s clock speeds are relevant to its performance. The base clock is 1330 MHz, the game clock is 2070 MHz, and the boost clock reaches 2520 MHz. The relatively high game clock suggests the card is designed to sustain high frequencies during typical gaming workloads, which is reflected in the strong 1080p scores. The FP32 performance of 36.13 TFLOPS and the pixel rate of 322.6 GPixel/s are qualitative indicators of its raw compute power, which allows it to handle the demanding draw calls and shading work in Fivem’s dense urban environments.

The RX 9070’s nearest rivals in the benchmark database provide context for its overall performance. It scores 0.6% higher than the NVIDIA GeForce GTX TITAN Z and 1.1% higher than the NVIDIA GeForce RTX 3080 Mobile, while being 0.8% lower than the AMD Radeon RX 6800S and 1.2% lower than the NVIDIA GeForce RTX 2080 SUPER. These tight margins show that in general compute benchmarks, the RX 9070 is competitive with a broad range of older high-end cards, but its specific strength in Fivem comes from its modern architecture and ample video memory. The 4 nm process node from TSMC contributes to its efficiency, allowing it to maintain high clocks without excessive power draw, though the TDP is listed at 220 W.

FAQ

Q: Can this combo handle Fivem at 4K resolution?

A: Yes, but with caveats. The data shows an average of 57 FPS at 4K with High settings and 90 FPS with Low settings. For a smoother experience, the Medium preset yields 71 FPS, which is above the 60 FPS threshold for most displays.

Q: What is the best resolution for high refresh rate gaming?

A: At 1080p, the combo delivers excellent performance, with averages of 155 FPS on High and 246 FPS on Low. This makes 1080p the ideal choice for a 144Hz or 240Hz monitor. At 1440p, the High preset still produces 102 FPS, which is suitable for a 100Hz+ display.

Q: How does the GPU compare to its direct competitors?

A: The RX 9070’s average benchmark score is 23877. It is 0.6% faster than the NVIDIA GeForce GTX TITAN Z and 1.1% faster than the NVIDIA GeForce RTX 3080 Mobile. It is slightly slower than the AMD Radeon RX 6800S by 0.8% and the NVIDIA GeForce RTX 2080 SUPER by 1.2%.

Q: Is the CPU a bottleneck for the GPU in this game?

A: The data indicates that the GPU is the primary limiting factor at higher resolutions. The frame rate drops by roughly 63% from 1080p Low to 4K Low, which aligns with the GPU’s rendering load. The CPU’s role is more significant at 1080p Low, where the 246 FPS average suggests the CPU is capable of feeding the GPU at high rates.

Q: What is the performance difference between Low and Ultra settings?

A: The difference is substantial. At 1080p, the average FPS drops from 246 on Low to 120 on Ultra, a 51% decrease. At 4K, the drop is from 90 FPS on Low to 44 FPS on Ultra, a 51% decrease as well. This shows that the Ultra preset roughly halves the frame rate compared to Low across all resolutions.

Q: Does the 16 GB VRAM affect the results?

A: The fact that the frame rates scale cleanly with resolution and settings suggests that 16 GB of VRAM is not a limiting factor. The GPU’s 644.6 GB/s memory bandwidth is sufficient for the data transfer requirements at 4K, as there is no evidence of severe performance cliffs or stuttering in the average FPS data.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four quality presets.

At 1920x1080, the combo shows its highest performance. The Low preset achieves an average of 246 FPS. The Medium preset delivers 194 FPS, with a minimum of 165 FPS and a maximum of 223 FPS. The High preset produces 155 FPS. The Ultra preset is the most demanding, yielding an average of 120 FPS. These numbers indicate that 1080p is well within the comfort zone for this hardware, offering high frame rates even on the most demanding settings.

At 2560x1440, the performance remains strong but shows the expected reduction. The Low preset averages 162 FPS. The Medium preset drops to 128 FPS, with a minimum of 108 FPS and a maximum of 147 FPS. The High preset averages 102 FPS. The Ultra preset produces 79 FPS. This resolution strikes a balance between visual fidelity and performance, with the High preset still breaking the 100 FPS barrier.

At 3840x2160, the GPU is heavily taxed. The Low preset is the only setting that maintains a comfortable margin above 60 FPS, with an average of 90 FPS. The Medium preset averages 71 FPS, with a minimum of 60 FPS and a maximum of 81 FPS. The High preset drops to an average of 57 FPS, which is below the 60 FPS target for smooth gameplay. The Ultra preset is the most demanding, with an average of just 44 FPS. This clearly shows that 4K gaming requires reduced settings to achieve playable frame rates.

How This Combo Ranks

In the benchmark database, this specific combination of the AMD Ryzen 5 5500X3D and the AMD Radeon RX 9070 is ranked 847th out of 3005 tested combos for Fivem. This places it in the top 28% of all configurations tested, which is a solid result for a mid-range pairing. The rank reflects the balance between the CPU and GPU, where neither component is severely underpowered for the other.

The rank of 847 out of 3005 suggests that there are many other combinations that can outperform this one, likely those with higher-tier GPUs or newer CPUs. However, it also means that this combo outperforms the majority of tested systems. The data shows that this is not a top-tier enthusiast setup, but it is a very capable one that should provide a smooth experience in most scenarios. The combination of a 6-core CPU with a high-end GPU appears to be a sweet spot for this game, avoiding the severe bottlenecks that can occur with weaker processors.

This ranking is consistent with the CPU’s 85th percentile among all CPUs and the GPU’s 69th percentile among all GPUs. The CPU is relatively stronger than the GPU in the general benchmark pool, but the game’s performance is still largely dictated by the GPU. The overall combo rank indicates that the system performs as expected for its component tier, with no major anomalies in the FPS data.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It features a base clock of 3.00 GHz and a boost clock of 4.00 GHz. The key feature is its large 96 MB shared L3 cache, which is a hallmark of the X3D series and is designed to reduce memory latency and improve gaming performance. This is particularly relevant for Fivem, a multiplayer game that often involves complex physics and simulation calculations that can benefit from a large, fast cache.

The CPU’s benchmark scores show a strong balance between single-thread and multi-thread performance. It scores 2941 in Passmark single-thread tests and 20363 in the multithreaded test. Its average benchmark score is 37018, placing it in the 85th percentile of all CPUs. In the context of Fivem, the high single-thread score is crucial, as many game logic and simulation tasks are still primarily single-threaded. The large L3 cache helps to ensure that frequently accessed data is readily available, which can reduce stuttering and improve frame time consistency.

Compared to its nearest rivals, the Ryzen 5 5500X3D is closely matched. It scores 0.2% higher than the AMD Ryzen 5 5600F and the Intel Core Ultra 5 225. It is 0.2% lower than the AMD Ryzen AI 7 PRO 450 and 0.3% lower than the Intel Core i9-12900T. These tiny margins show that the CPU is well positioned in its performance class, offering comparable compute capabilities to a variety of recent mid-range and older high-end parts. The CPU’s 105 W TDP and socket AM4 compatibility make it an accessible upgrade for existing platforms.

In this specific game, the CPU’s role is to feed the GPU with data. The data shows that at 1080p Low, the CPU is able to push the frame rate to 246 FPS, which indicates that it is not a limiting factor at that resolution. As the resolution increases, the GPU takes over as the primary bottleneck, and the CPU’s performance becomes less critical. The 6 cores and 12 threads are sufficient for Fivem’s multi-threaded aspects, such as handling network traffic and AI, but the game’s core loop likely benefits most from the high single-thread performance and the massive L3 cache.