Thief

Thief

AVERAGE FPS
72
good

This combination provides smooth gameplay with an average of 72 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 33 44 57
1440p QHD 54 56 74 98
1080p Full HD 78 82 108 142

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 57
3840x2160 Medium 44
3840x2160 High 33
3840x2160 Ultra 32
2560x1440 Low 98
2560x1440 Medium 74
2560x1440 High 56
2560x1440 Ultra 54
1920x1080 Low 142
1920x1080 Medium 108
1920x1080 High 82
1920x1080 Ultra 78

Thief with AMD Ryzen 5 5500X3D + AMD Radeon RX 6600, In-Depth Analysis

The AMD Ryzen 5 5500X3D paired with the AMD Radeon RX 6600 delivers a playable, if not spectacular, experience in Thief, with performance scaling that clearly exposes the GPU as the primary constraint at higher resolutions. The data shows a substantial performance cliff when moving from 1080p to 4K, while the CPU’s large cache appears to provide a stable foundation for frame pacing at lower settings.

Resolution Scaling

The measured FPS data reveals a stark and predictable pattern: as resolution increases, frame rates fall in near-linear fashion, indicating that the Radeon RX 6600’s rendering throughput is the limiting factor. At 1080p with High settings, the combo averages 82 FPS. Moving to 1440p drops this to 56 FPS, a 31.7% reduction, and at 4K, the average plunges to 33 FPS, a 59.8% drop from the 1080p baseline. This scaling behavior is characteristic of a GPU-bound scenario, where the pixel count outpaces the shader and memory bandwidth capabilities of the graphics card.

The trend is even more pronounced at Ultra settings. At 1080p Ultra, the average is 78 FPS, which is only 4.9% lower than High, suggesting that the game’s Ultra preset adds relatively little GPU stress at this resolution. However, at 4K Ultra, the average falls to 32 FPS, a 59% reduction from the 1080p Ultra score. The gap between High and Ultra remains consistent across resolutions, implying that the extra visual fidelity from Ultra is not the main bottleneck; rather, the sheer pixel throughput at 4K overwhelms the GPU’s 224.0 GB/s memory bandwidth and 8.928 TFLOPS of compute power.

Interestingly, the Low preset shows the least severe scaling. At 1080p Low, the system achieves 142 FPS, dropping to 98 FPS at 1440p (a 31% decrease) and 57 FPS at 4K (a 59.9% decrease). The relative consistency of these percentage drops across all presets—roughly 30-32% from 1080p to 1440p and 59-60% from 1080p to 4K—strongly suggests that resolution, not graphical complexity, is the dominant variable. The CPU, with its 96 MB of shared L3 cache, is likely feeding frames fast enough that it never becomes the primary limiter; the data implies the RX 6600’s 8 GB frame buffer and 128-bit memory interface are saturated at higher pixel counts.

How This Combo Ranks

In the grand scheme of tested hardware configurations for Thief, this pairing sits in the lower half of the database. The combo ranks 2230 out of 2851 tested combinations, placing it in the 21.8th percentile of all systems. This is a modest result, reflecting the mid-range nature of both components. The GPU alone holds a 63rd percentile ranking among all GPUs in the database, while the CPU holds an 85th percentile ranking among all CPUs. The disparity between these two percentiles—the CPU being significantly stronger relative to its peers than the GPU—further reinforces the notion that the graphics card is holding the system back in this title.

The CPU’s nearest rivals in synthetic benchmarks are tightly clustered, with the Ryzen 5 5500X3D scoring an average benchmark of 37018. It sits just 0.2% ahead of the AMD Ryzen 5 5600F and 0.2% behind the Intel Core Ultra 5 225, while the AMD Ryzen AI 7 PRO 450 is 0.2% faster. This indicates that the 5500X3D’s compute performance is entirely mainstream; its high percentile ranking comes from the exceptional L3 cache size rather than raw core speed. The GPU, meanwhile, is flanked by the NVIDIA Quadro K6000 (0% delta) and NVIDIA GeForce RTX 4050 Mobile (0.1% slower), showing that the RX 6600’s raw graphics compute is comparable to older workstation cards and modern entry-level mobile parts. Given this, the 2230 rank in Thief is unsurprising—the system has enough CPU headroom to push the GPU to its limits, but those limits are average at best.

Settings Recommendations

The measured rows indicate that the Medium preset offers the most balanced experience across all resolutions, providing a substantial jump in frame rate over High without the steep visual cost of Low. At 1080p Medium, the system averages 108 FPS with a minimum of 92 FPS and a maximum of 124 FPS. This is a 31.7% improvement over High (82 FPS) and only 24% slower than Low (142 FPS). The min FPS of 92 ensures that frame pacing remains smooth, avoiding the stutter that can plague stealth games where precise timing is crucial.

At 1440p, Medium is the only preset that consistently maintains playable frame rates. The 74 FPS average with a 63 FPS minimum is comfortably above the 60 FPS threshold, while High drops to 56 FPS and Ultra falls to 54 FPS. Low, at 98 FPS, is faster but may introduce visual artifacts or reduced draw distances that compromise the atmospheric quality of Thief. For 4K, no preset achieves a smooth 60 FPS experience. Medium averages 44 FPS with a 37 FPS minimum, which is playable for a slower-paced stealth game but not ideal. Low, at 57 FPS, is the only 4K option that approaches playability, though it sacrifices significant visual fidelity.

The data suggests that Medium is the sweet spot for this hardware. It provides a 31.7% frame rate uplift over High at 1080p and a 31.7% uplift at 1440p, while maintaining a minimum FPS that is 17.4% higher than the average FPS of High at the same resolution. For users prioritizing smoothness, Low at 1440p (98 FPS) is superior to Medium at 1080p (108 FPS) in terms of absolute frame count, but the latter offers better visual quality with only a 9.3% performance penalty. Ultimately, Medium is recommended for 1080p and 1440p, while 4K users should accept either Medium for visuals or Low for frame rate.

FAQ

*Q: Is this CPU-GPU combo capable of running Thief at 4K?*

A: Yes, but only at lower settings. The data shows 57 FPS at 4K Low and 44 FPS at 4K Medium, which are playable for a stealth title, though Ultra (32 FPS) and High (33 FPS) are not smooth.

Q: How much faster is 1080p compared to 4K on this system?

A: Across all presets, 1080p is roughly 2.5 times faster than 4K. For example, at High settings, the 1080p average is 82 FPS versus 33 FPS at 4K, a 148% increase in frame rate.

Q: What is the biggest performance difference between Low and Ultra settings?

A: At 1080p, Low runs at 142 FPS while Ultra runs at 78 FPS, meaning Low is 82% faster. At 4K, the gap narrows to 78% (57 FPS vs 32 FPS), indicating that Ultra’s extra effects have less relative impact at higher resolutions.

*Q: Does the RX 6600’s 8 GB VRAM cause issues in Thief?*

A: The data does not show explicit VRAM overflow, but the steep scaling from 1440p to 4K (e.g., 56 to 33 FPS at High) suggests the memory system is strained. The 224.0 GB/s bandwidth is likely the limiting factor rather than capacity.

*Q: How does this combo compare to the average tested system for Thief?*

A: It ranks 2230 out of 2851 combos, placing it in the bottom 21.8% of tested systems. This is consistent with the GPU’s 63rd percentile ranking, which is below the median of all GPUs.

Q: Is the Ryzen 5 5500X3D holding back the RX 6600 in this game?

A: No. The CPU’s 85th percentile ranking and 96 MB L3 cache suggest it has ample headroom. The consistent 30% FPS drop from 1080p to 1440p across settings indicates the GPU is the bottleneck.

GPU Role

The Radeon RX 6600’s role in Thief is defined by its 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. This is the critical specification for understanding the resolution scaling. The card’s base clock is 1626 MHz with a boost clock of 2491 MHz, and a game clock of 2044 MHz, which allows for a peak FP32 performance of 8.928 TFLOPS. In practice, these clocks translate to solid 1080p performance, but the memory subsystem becomes a wall at 4K.

The benchmark results show that the GPU’s Passmark G3D score is 15096, placing it at the 63rd percentile. This is a mid-range score, and the nearest rivals—the NVIDIA Quadro K6000 and GeForce RTX 4050 Mobile—are within 0.3% of its performance. The pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s are sufficient for 1080p and 1440p, but the 4K data (33 FPS at High) indicates that the card’s 64 ROPs cannot fill the screen efficiently at that resolution. The 14 Gbps effective memory speed, while standard for the era, does not provide the bandwidth headroom needed for 4K textures, explaining why Low settings (57 FPS) are nearly 73% faster than High (33 FPS) at 4K.

The GPU’s TDP of 132 W and PCIe 4.0 x8 interface are not directly reflected in the FPS data, but they contextualize its performance class. The card’s end-of-life production status and 2021 release date mean it is a previous-generation part, and its performance in Thief—a 2014 title—shows that even older games can stress its memory bandwidth at high resolutions. The data implies that the RX 6600 is best suited for 1080p gaming, where it excels, rather than 4K, where it falls below the 60 FPS threshold on all presets.

CPU Role

The AMD Ryzen 5 5500X3D brings a unique asset to this pairing: 96 MB of shared L3 cache. This is the standout feature of the 5000 series processor, which has 6 cores and 12 threads running at a 3.00 GHz base clock and 4.00 GHz boost clock. The CPU’s Passmark multithread score is 20363, and its single-thread score is 2941, which are solid but not exceptional numbers. However, its percentile ranking of 85th among all CPUs is notably higher than the GPU’s 63rd percentile, suggesting that the processor has significant performance headroom in this game.

The large cache is likely responsible for the stable frame pacing seen in the Medium preset’s min FPS values. At 1080p Medium, the min FPS is 92, which is 85% of the average FPS of 108, indicating minimal stutter. This is a hallmark of a CPU that can keep frequently accessed data on-die, reducing the need to fetch from system memory (DDR4, dual-channel, 51.2 GB/s). The CPU’s 7 nm process and 74 mm² die size also contribute to its efficiency, but the raw clock speed of 4.00 GHz is modest compared to newer chips, which explains why it only edges out the Ryzen 5 5600F by 0.2% in average benchmark scores.

In Thief, the CPU’s role appears to be one of enabler rather than limiter. The FPS differences between Low and Medium presets (e.g., 142 vs 108 FPS at 1080p) are primarily driven by GPU workload, not CPU constraints. The CPU’s nearest rivals all have average scores within 0.3% of the 5500X3D, meaning that swapping to another mid-range CPU would likely yield similar frame rates. The data suggests that the 5500X3D’s cache advantage is most beneficial in scenarios with complex AI and physics, which are common in stealth games, but the overall frame rate ceiling is set by the RX 6600.

Measured FPS Breakdown

The complete dataset provides a clear matrix of performance across three resolutions and four settings. At 1920x1080, the system achieves its highest frame rates: Low averages 142 FPS, Medium averages 108 FPS (min 92, max 124), High averages 82 FPS, and Ultra averages 78 FPS. The spread from Low to Ultra is 64 FPS, showing that the GPU has ample headroom at this resolution.

At 2560x1440, performance drops by roughly 30-32% across all presets. Low averages 98 FPS, Medium averages 74 FPS (min 63, max 85), High averages 56 FPS, and Ultra averages 54 FPS. The gap between High and Ultra narrows to just 2 FPS, suggesting that Ultra’s additional effects are not rendering efficiently at this resolution. The Medium preset’s min FPS of 63 indicates that it remains above the 60 FPS threshold, making it the only 1440p preset that is consistently smooth.

At 3840x2160, the GPU is clearly overwhelmed. Low averages 57 FPS, Medium averages 44 FPS (min 37, max 50), High averages 33 FPS, and Ultra averages 32 FPS. The difference between High and Ultra is negligible (1 FPS), and even Low fails to reach 60 FPS. The min FPS of 37 at Medium is concerning, as it suggests occasional drops into the 30s, which can be noticeable in a game requiring precise movement. The data shows that 4K is only viable on Low for a playable experience, and even then, it is borderline.

The min and max FPS data is only available for the Medium preset, but it reveals a consistent pattern: the frame range tightens as resolution increases. At 1080p, the range is 32 FPS (92 to 124), at 1440p it is 22 FPS (63 to 85), and at 4K it is 13 FPS (37 to 50). This indicates that at higher resolutions, the GPU is more consistently saturated, reducing the variance but also lowering the average. For a stealth game where sudden frame drops can ruin tension, the Medium preset at 1440p offers the best combination of high average (74), acceptable minimum (63), and moderate variance.

Hardware Specifications

AMD Ryzen 5 5500X3D

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 6600

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2491 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5500X3D + AMD Radeon RX 6600 in Thief

Resolution Settings Avg FPS
3840x2160 Low 57.0
3840x2160 Medium 44.0
3840x2160 High 33.0
3840x2160 Ultra 32.0
2560x1440 Low 98.0
2560x1440 Medium 74.0
2560x1440 High 56.0
2560x1440 Ultra 54.0
1920x1080 Low 142.0
1920x1080 Medium 108.0
1920x1080 High 82.0
1920x1080 Ultra 78.0

Thief with Ryzen 5 5500X3D + Other GPUs

See how Thief performs with the same CPU but different graphics cards.

Thief with RX 6600 + Other CPUs

See how Thief performs with the same GPU but different processors.

Other Games with Ryzen 5 5500X3D + RX 6600

Explore FPS benchmarks for other games using this same hardware combination.