The Technomancer

Resolution Scaling

The measured FPS data for The Technomancer with the AMD Ryzen 7 5800X and AMD Radeon RX 6600 XT shows a clear progression as resolution increases. At 1080p with High settings, the combo delivers 95.4 FPS. Moving to 1440p High drops this to 61.7 FPS, a reduction of approximately 35%. At 4K High, the average falls to 35.2 FPS, which is roughly 63% below the 1080p figure. This steep decline indicates that the rendering load scales heavily with pixel count, and the GPU becomes the primary bottleneck as resolution climbs.

The pattern holds across all settings presets. At Low settings, the spread from 139.4 FPS at 1080p to 52.9 FPS at 4K is substantial. Medium settings show a similar trajectory: 112.9 FPS at 1080p, 72.9 FPS at 1440p, and 38.6 FPS at 4K. Ultra settings are the most demanding, starting at 73.2 FPS at 1080p and falling to 27.1 FPS at 4K. The consistent drop at each resolution step suggests that the RX 6600 XT's 8 GB GDDR6 memory and 256.0 GB/s bandwidth are being saturated at higher resolutions, particularly when texture quality and other memory-intensive features scale up.

What the data reveals about the limiting component is nuanced. At 1080p, the FPS at Low (139.4) versus Ultra (73.2) shows a wide gap, indicating the GPU is doing most of the work. However, the Ryzen 7 5800X with 8 cores and 16 threads is capable of feeding the GPU adequately at these settings. At 4K, the FPS values compress closer together across presets — from 52.9 at Low to 27.1 at Ultra — which is a classic sign that the GPU is fully saturated and the CPU headroom is not the constraint. The 5800X's single-thread performance, evidenced by a 3dmark single-thread score of 943, is sufficient to avoid holding back the RX 6600 XT in this title.

GPU Role

The AMD Radeon RX 6600 XT is built on the RDNA 2.0 architecture with a Navi 23 chip manufactured on a 7 nm process. Its base clock is 1968 MHz, with a game clock of 2359 MHz and a boost clock of 2589 MHz. These clock speeds are relatively high for the GPU's class, and the benchmark results reflect that. The GPU's PassMark G3D score of 16461 places it in the 71st percentile among all GPUs, which is respectable for a mid-range part.

The 8 GB of GDDR6 memory on a 128-bit bus provides 256.0 GB/s of bandwidth. In The Technomancer, this memory configuration appears to be a limiting factor at 4K. The FPS drop from High (35.2) to Ultra (27.1) at 4K is 23%, which is larger than the corresponding drop at 1080p (95.4 to 73.2, a 23% difference as well, but the absolute FPS loss is smaller). The texture-heavy scenes at 4K likely push against the 8 GB VRAM ceiling, causing the GPU to manage memory more aggressively. The GPU's pixel rate of 165.7 GPixel/s and texture rate of 331.4 GTexel/s are adequate for 1440p gaming, but at 4K these throughput limits become evident.

The RX 6600 XT's nearest rivals in the benchmark database include the NVIDIA GeForce GTX 980 Ti, which it edges out by 0.1% in average benchmark score, and the AMD Radeon R9 M395X, which it leads by 0.4%. More notably, it trails the NVIDIA GeForce RTX 3070 by 0.9% and the AMD FirePro S7150 by 1.5%. These small deltas indicate that the RX 6600 XT sits in a competitive performance band, but the measured FPS in The Technomancer shows it is not a 4K-capable part for this game, as even Low settings at 4K only reach 52.9 FPS.

CPU Role

The AMD Ryzen 7 5800X is a Zen 3 architecture processor codenamed Vermeer, built on a 7 nm process. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 4.70 GHz. The CPU's cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of L3, which is shared across all cores. This configuration gives the 5800X strong multithreaded performance, as reflected in its Cinebench R23 multicore score of 23571 and Geekbench multicore score of 10220.

In the context of The Technomancer, which is an Action RPG from 2016, the CPU demands are moderate. The 5800X sits in the 84th percentile among all CPUs, with an average benchmark score of 27606. Its nearest rivals include the AMD Ryzen 7 5800 (0.3% higher score), AMD Ryzen 5 8500GE (0.4% higher), Intel Core i7-13700H (0.4% higher), and Intel Core i5-12600KF (0.8% higher). These deltas are all within 1%, meaning the 5800X is essentially performance-equivalent to a broad set of modern CPUs in synthetic benchmarks.

For this game, the CPU's role is to maintain frame pacing and avoid bottlenecking the GPU. The measured FPS at 1080p Low (139.4) suggests the CPU can push well over 130 FPS in less demanding scenes. The single-thread performance, with a PassMark single-thread score of 3445 and a 3dmark single-thread score of 943, is strong enough for the game's logic and physics. The 5800X's 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are sufficient for this workload. The data indicates that the CPU is not the limiting factor in any resolution tested; the GPU saturates first at 4K, while at 1080p the combo achieves playable frame rates across all presets.

How This Combo Ranks

In the database of tested hardware combinations for The Technomancer, this pairing of the Ryzen 7 5800X and Radeon RX 6600 XT ranks 1168 out of 1656 combos. This places it in the 70th percentile of all tested configurations, which is a moderate ranking. The rank reflects that while the CPU is strong (84th percentile among CPUs), the GPU's 71st percentile standing pulls the overall combo down. Many combinations with higher-end GPUs will outrank this pairing in this specific game.

The combo's ranking suggests that the RX 6600 XT is the weaker link. In a game like The Technomancer, which is GPU-bound at higher resolutions, the GPU's performance ceiling determines the overall experience. The CPU's 8-core, 16-thread configuration and high boost clock provide ample headroom, but the GPU's 8 GB VRAM and 128-bit memory bus limit 4K performance. The measured FPS at 1440p High (61.7) and 1080p High (95.4) are playable, but the 4K results (35.2 at High) fall below the 60 FPS threshold that most users consider smooth.

The rank of 1168 out of 1656 means there are 488 combos that perform worse, and 1167 that perform better. This is a middle-of-the-pack result, consistent with the GPU's mid-range positioning. Users with this combo should target 1080p or 1440p for the best experience, as the 4K data shows diminishing returns even at lower settings presets.

Settings Recommendations

Based on the measured rows, the optimal settings preset for this combo depends on the target resolution and desired frame rate. At 1080p, the High preset delivers 95.4 FPS, which is well above the 60 FPS smoothness threshold. Medium at 1080p gives 112.9 FPS, and Low gives 139.4 FPS. Ultra at 1080p drops to 73.2 FPS, which is still playable, but the visual gain from Ultra over High may not justify the 23% FPS loss. For most users at 1080p, High is the recommended preset as it balances visual quality with a comfortable FPS margin.

At 1440p, the High preset yields 61.7 FPS, which is just above 60 FPS and provides a smooth experience. Medium at 1440p gives 72.9 FPS, offering more headroom at a slight visual cost. Low at 1440p reaches 93.6 FPS, which is excellent for competitive play, but the visual downgrade is noticeable. Ultra at 1440p falls to 44.9 FPS, which is below the 60 FPS threshold and may cause noticeable stutter in fast-paced combat. For 1440p, Medium or High are the best choices, with High preferred if the user prioritizes visuals and Medium if they want more FPS stability.

At 4K, the situation is more constrained. High at 4K delivers 35.2 FPS, which is below playability for most users. Medium at 4K gives 38.6 FPS, and Low at 4K reaches 52.9 FPS. Ultra at 4K drops to 27.1 FPS, which is not recommended. Even Low at 4K does not reach 60 FPS, so users with this combo should either accept lower frame rates at 4K or drop to 1440p for a better experience. The data suggests that 4K is not a viable target for this combo in The Technomancer, and the best experience will be had at 1440p High or 1080p Ultra.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: Based on the measured FPS, 1440p with High settings provides 61.7 FPS, which is above the 60 FPS threshold. 1080p High delivers 95.4 FPS for a more comfortable margin. 4K results are below 60 FPS even at Low settings (52.9 FPS).

Q: How does the RX 6600 XT compare to its nearest rivals in synthetic benchmarks?

A: The RX 6600 XT's average benchmark score of 27985 is 0.1% higher than the NVIDIA GeForce GTX 980 Ti (27956), 0.4% higher than the AMD Radeon R9 M395X (27883), 0.9% lower than the NVIDIA GeForce RTX 3070 (28238), and 1.5% lower than the AMD FirePro S7150 (28409).

Q: Is the Ryzen 7 5800X a bottleneck for this GPU in this game?

A: The data does not indicate a CPU bottleneck. At 1080p Low, the combo achieves 139.4 FPS, and the CPU's single-thread score (943 in 3dmark single-thread) is strong. The FPS drops at 4K are consistent with GPU saturation, not CPU limitations.

Q: What FPS can I expect at 1080p with Ultra settings?

A: The measured average FPS at 1080p Ultra is 73.2. This is playable, but it is 23% lower than High settings (95.4 FPS). The visual difference between High and Ultra may not justify the FPS loss.

Q: How does this combo rank among all tested configurations?

A: This combo ranks 1168 out of 1656 tested combinations for The Technomancer, placing it in the 70th percentile. The CPU ranks in the 84th percentile among all CPUs, while the GPU ranks in the 71st percentile among all GPUs.

Q: Can this combo handle 4K gaming in The Technomancer?

A: The measured 4K results show 52.9 FPS at Low, 38.6 FPS at Medium, 35.2 FPS at High, and 27.1 FPS at Ultra. None of these meet the 60 FPS standard. Users seeking 4K should consider a different GPU or lower their expectations to 1440p.