The Technomancer

The AMD Ryzen 7 5700X3D paired with the Intel Arc B580 produces a distinctive performance profile in The Technomancer, one that shifts its bottleneck characteristics significantly as resolution scales. The data shows a clear trajectory: at 1080p, the combo is capable of delivering high frame rates, but at 4K, it falls below the threshold for smooth gameplay. This behavior is characteristic of a system where the GPU becomes progressively more dominant as pixel count increases, a typical pattern for a mid-range graphics card paired with a strong multi-threaded processor.

Resolution Scaling

The measured FPS data reveals a steep performance curve across the three tested resolutions. At 1920x1080 with High settings, the combo achieves an average of 88.5 FPS, which is a very playable figure. Moving to 2560x1440 at the same High preset, the average drops to 59.6 FPS, a reduction of roughly 33%. This is a significant hit, but the frame rate remains within a range most users would consider acceptable for an Action RPG.

The transition to 3840x2160 is where the combo struggles. At 4K High, the average FPS falls to 34.8, which is a 41% drop from the 1440p result and a 61% drop from the 1080p result. This steep decline indicates that the Intel Arc B580’s rendering capabilities are the primary limiting factor at this resolution. The CPU, with its 8 cores and 16 threads based on the Zen 3 architecture, is unlikely to be the constraint at 4K, as the workload shifts heavily onto the GPU’s pixel and texture processing units. The data points to a system that is very capable at 1080p, adequate for 1440p, and insufficient for demanding 4K gameplay at higher settings.

How This Combo Ranks

The combination of the Ryzen 7 5700X3D and the Arc B580 holds a rank of 1307 out of 1656 tested combos in The Technomancer. This places it in the lower-middle portion of the database, indicating that while it is not a top-tier performer for this specific title, it is far from the bottom. The percentile ranking for the CPU alone is 82, meaning it outperforms 82% of all tested CPUs in general benchmarks, but the combo’s overall rank is dragged down by the GPU’s performance. The Arc B580’s individual percentile is 66, showing it is a mid-pack GPU, and in this game, that proves to be the limiting factor.

The combo’s rank suggests that many other pairings deliver higher frame rates in this specific game. The data implies that the processor has headroom to spare, but the graphics card cannot fully utilize it at higher resolutions. This is a classic imbalance; the system is built around a strong CPU, but the GPU’s 13.67 TFLOPS of FP32 performance and 427.2 GTexel/s texture rate are not enough to push The Technomancer to higher average frame rates. The rank of 1307 out of 1656 is a useful data point for users who prioritize CPU-heavy workloads but also expect reasonable gaming performance.

FAQ

Q: What is the average frame rate at 1080p with Ultra settings?

A: At 1920x1080 with the Ultra preset, the measured average FPS is 68.1. This is a playable frame rate for the game, though it is notably lower than the 88.5 FPS achieved at High settings, showing a clear performance cost for the highest quality preset.

Q: How does the combo perform at 1440p compared to 1080p?

A: At 2560x1440 with High settings, the average FPS is 59.6, which is a 32.7% decrease from the 88.5 FPS seen at 1920x1080 with the same settings. This indicates that the GPU is already starting to become a bottleneck at this resolution, as the frame rate drops below the 60 FPS threshold.

Q: Is the Ryzen 7 5700X3D or the Intel Arc B580 the limiting factor at 4K?

A: The data suggests the GPU is the primary limiting factor at 3840x2160. The average FPS at 4K High is 34.8, a significant drop from 59.6 at 1440p High. Since the CPU has ample multi-threaded performance (scoring 22366 in Cinebench R23 multicore), the sharp decline in frame rate is attributed to the Arc B580’s rendering limits at this high pixel count.

Q: What is the best settings preset for 1440p gameplay?

A: The data shows that at 2560x1440, the Low preset achieves an average of 88.0 FPS, while Medium achieves 67.1 FPS and High achieves 59.6 FPS. For a smooth experience, the Low preset offers the highest headroom, but the Medium preset provides a balance, staying above 60 FPS.

Q: How does the combo rank overall in this game?

A: The combo is ranked 1307 out of 1656 tested combinations in The Technomancer. This places it in the lower half of the database, indicating that while the CPU is strong, the overall gaming performance is held back by the GPU in this specific title.

Q: Does the GPU’s 12 GB of VRAM affect performance at 4K?

A: While the GPU has 12 GB of GDDR6 memory and a 192-bit bus width, the measured FPS at 4K is still low. At 4K Ultra, the average is 26.0 FPS, and at High it is 34.8 FPS. The data indicates that raw compute and memory bandwidth (456.0 GB/s) are the limiting factors, rather than VRAM capacity alone.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across all settings. At 1920x1080, the frame rates are generally high. The Low preset yields an average of 133.8 FPS, which drops to 107.1 FPS at Medium, 88.5 FPS at High, and 68.1 FPS at Ultra. This scaling shows a performance cost of approximately 49% between Low and Ultra, which is a significant range and gives users many options for prioritizing frame rate or visual fidelity.

At 2560x1440, the performance is more moderate. The Low preset averages 88.0 FPS, which is still smooth. Medium averages 67.1 FPS, and High averages 59.6 FPS, which is just below the 60 FPS mark. The Ultra preset drops to 45.6 FPS, which may feel less responsive. The gap between Low and Ultra at this resolution is about 48%, similar to the scaling at 1080p.

At 3840x2160, the frame rates are the lowest. The Low preset averages 49.1 FPS, which is the only playable option at this resolution. Medium averages 36.7 FPS, High averages 34.8 FPS, and Ultra averages 26.0 FPS. The difference between Low and Ultra is 47%, but the absolute numbers are all below the 60 FPS threshold. This indicates that for a consistent experience, users would need to use the Low preset at 4K or lower the resolution to 1440p.

GPU Role

The Intel Arc B580 plays a decisive role in shaping the gaming experience in The Technomancer. Its specifications show a 5 nm chip with 19,600 million transistors on a 272 mm² die, operating at a base and boost clock of 2670 MHz. The GPU has 2560 shading units, 160 TMUs, and 80 ROPs, which contribute to its pixel rate of 213.6 GPixel/s and texture rate of 427.2 GTexel/s. The FP32 performance is rated at 13.67 TFLOPS.

These figures are moderate for a modern GPU, and the benchmark results reflect this. The GPU’s 3DMark Steel Nomad score is 3068, and its Passmark G3D score is 15748, placing it at the 66th percentile of all GPUs. In the context of The Technomancer, the GPU’s performance is the main factor behind the frame rate drops at higher resolutions. The 12 GB of GDDR6 memory on a 192-bit bus provides a bandwidth of 456.0 GB/s, which is sufficient for the game’s textures, but the compute throughput is not enough to maintain high frame rates at 4K.

The GPU’s role is further highlighted by the fact that the CPU is not the bottleneck. The Ryzen 7 5700X3D has a high average benchmark score of 24673 and ranks at the 82nd percentile, with a Cinebench R23 multicore score of 22366. This means the processor has significant headroom, but the Arc B580 cannot translate that headroom into higher FPS in this title. The data shows that the GPU is the component that limits performance, particularly when the resolution increases to 1440p and 4K, where the gap between the Low and Ultra presets narrows in absolute terms due to the GPU hitting its limits.