The Technomancer
This combination provides smooth gameplay with an average of 96 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 45 | 51 | 68 |
| 1440p QHD | 68 | 84 | 101 | 129 |
| 1080p Full HD | 99 | 126 | 153 | 194 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 7700 XT, In-Depth Analysis
The Technomancer, a 2016 Action RPG, presents an interesting test for the AMD Ryzen 7 5700X3D and AMD Radeon RX 7700 XT pairing. The measured frame rates reveal a configuration that is heavily influenced by graphical settings and resolution, with the GPU typically acting as the primary performance limiter. The data shows a wide performance envelope, from a highly playable 193.8 FPS at 1080p Low to a demanding 32.4 FPS at 4K Ultra, demonstrating the significant scaling requirements of this title.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 7700 XT is the dominant factor in these benchmark results. Its specifications, including a 12 GB GDDR6 memory pool on a 192-bit bus delivering 432.0 GB/s of bandwidth, provide a substantial foundation for The Technomancer’s rendering demands. The GPU’s boost clock of 2544 MHz and game clock of 2171 MHz, built on the RDNA 3.0 architecture with 3456 shading units, dictate the raw throughput available for each frame.
The influence of the GPU becomes clear when analyzing the performance deltas across settings. At 1080p, the jump from Low to Ultra settings reduces the average frame rate from 193.8 FPS to 98.9 FPS, a drop of 94.9 FPS. This indicates that the graphics card is being tasked with progressively heavier workloads, such as increased shading complexity and texture detail. The 12 GB of VRAM is likely sufficient for this game, even at 4K Ultra, as the data does not suggest a memory capacity bottleneck; the performance degradation is more consistent with raw compute limits.
At 4K, the GPU’s role is even more pronounced. The Ultra preset yields a 32.4 FPS average, which is a demanding scenario for the RX 7700 XT’s 96 ROPs and 216 TMUs. The data suggests that the card’s pixel fill rate and texture processing capabilities are being saturated. The 35.17 TFLOPS of FP32 compute is the theoretical ceiling, and the measured results show the practical limits of this architecture when pushed to higher resolutions and quality presets. The card’s performance here is less about memory capacity and more about the sheer computational power required to fill 4K frames with the game’s visual effects.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The scaling from 1080p to 4K is a clear indicator of a GPU-bound scenario. Examining the High preset, the average FPS drops from 126.1 at 1920x1080 to 84.4 at 2560x1440, and finally to 44.6 at 3840x2160. This is a 64.6% reduction in frame rate from 1080p to 4K. This substantial drop is classic evidence that the rendering resolution is the primary stressor, and the CPU is not the limiting factor in these higher-resolution scenarios.
The trend is consistent across all settings. For the Medium preset, the frame rate goes from 152.7 FPS at 1080p to 101.2 FPS at 1440p and 50.6 FPS at 4K. The Low preset follows a similar pattern, dropping from 193.8 FPS at 1080p to 129 FPS at 1440p and 67.6 FPS at 4K. The percentage drop from 1440p to 4K is consistently larger than the drop from 1080p to 1440p, which is expected due to the 4K resolution having over twice the pixels of 1440p.
This scaling behavior suggests that the CPU, with its 8 cores and 16 threads, is capable of feeding the GPU enough data to maintain these frame rates. If the CPU were the bottleneck, we would expect to see a plateau in FPS at lower resolutions, with 1080p and 1440p results being much closer together. The data shows a steady decrease with every resolution increase, confirming that the RX 7700 XT is the component being pushed to its limits.
How This Combo Ranks — use comboRankInGame vs other tested combos
Within the database for The Technomancer, this specific combination of the AMD Ryzen 7 5700X3D and AMD Radeon RX 7700 XT holds a rank of 742 out of 1656 tested combos. This places the pairing in the upper-middle tier of all configurations tested for this game. It indicates that while this setup is capable of delivering smooth performance at many settings, it is not at the top of the performance hierarchy, where more powerful GPUs would reside.
The rank of 742 out of 1656 means that roughly 55% of tested combinations perform better, while 45% perform worse. This is a solid position, suggesting that the combo is well-balanced but not exceptional for this particular title. The game’s age and engine may not fully utilize the capabilities of the latest hardware, but the measured FPS figures show that it can still deliver a good experience.
The individual components have their own performance profiles. The CPU’s average benchmark score of 24673 places it in the 82nd percentile of all CPUs, with nearest rivals like the Intel Core i7-1360P (24627) and AMD Ryzen 5 7600X3D (24605) being nearly identical in performance. The GPU’s average benchmark score of 30097 puts it in the 73rd percentile of all GPUs, with the NVIDIA GeForce RTX 5060 (30109) as its closest rival. The combo’s in-game rank reflects the combined capabilities of these two components, which are both solid mid-to-high-tier performers.
FAQ
Q: Can this combo run The Technomancer smoothly at 1080p?
A: Yes, the data shows excellent performance at 1920x1080. Even at the Ultra preset, the average FPS is 98.9, which is well above the 60 FPS threshold for smooth gameplay. Lower presets push this much higher, with Low reaching 193.8 FPS.
Q: What is the best resolution for this GPU and CPU pairing?
A: The measured data suggests that 2560x1440 is a strong choice. At this resolution, the High preset averages 84.4 FPS and the Medium preset averages 101.2 FPS, providing a good balance between visual quality and frame rate. 4K is possible but requires lower settings to maintain playable frame rates.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The frame rate scaling indicates a clear GPU bottleneck at higher resolutions. The significant FPS drops from 1080p to 4K, such as from 126.1 to 44.6 FPS on High settings, are characteristic of a graphics card being pushed to its limits, rather than a CPU constraint.
Q: How does the RX 7700 XT compare to its closest rival in synthetic benchmarks?
A: The GPU’s average benchmark score is 30097, which is nearly identical to its nearest rival, the NVIDIA GeForce RTX 5060, which scores 30109. This represents a 0% performance difference in aggregate benchmark scores.
Q: Is 12 GB of VRAM enough for this game?
A: The data does not indicate a VRAM limitation. The performance scaling from 1080p to 4K is consistent with compute-bound rendering rather than a memory capacity issue. The 12 GB pool appears sufficient for The Technomancer’s demands.
Settings Recommendations
For the best experience, the data points to the High preset at 2560x1440 as the optimal balance. This configuration delivers an average FPS of 84.4, which is comfortably above 60 FPS and provides a significant visual upgrade over Medium and Low settings. Pushing to Ultra at this resolution drops the average to 67.8 FPS, which is still playable but begins to sacrifice the performance headroom that ensures consistent frame delivery.
At 1920x1080, the Ultra preset is a viable option, with an average FPS of 98.9. This allows players to max out the game’s visuals while still maintaining a high frame rate that takes advantage of high-refresh-rate monitors. The High preset at 1080p offers an even higher 126.1 FPS, which is ideal for competitive play or for those who prioritize frame rate above all else.
For 4K gaming, the data suggests that the Low preset, averaging 67.6 FPS, is the only setting that provides a consistently smooth experience. The Medium preset at 50.6 FPS is borderline, and the High and Ultra presets at 44.6 and 32.4 FPS respectively, are not recommended for a smooth experience. Therefore, 1440p High is the recommended sweet spot for this configuration.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 7 5700X3D’s role in these results is to provide a stable foundation that does not hinder the GPU. With 8 cores and 16 threads, it has ample multi-threading capability for a game like The Technomancer. Its base clock of 3.00 GHz and boost clock of 4.10 GHz, combined with a large 96 MB of shared L3 cache, are key specifications. This large cache is particularly beneficial for gaming, as it can reduce memory latency and improve data access for the CPU cores.
The benchmark results support the idea that the CPU is not a limiting factor. The consistent FPS scaling with resolution changes, as discussed earlier, is the primary indicator. If the CPU were a bottleneck, we would see the frame rates at 1080p and 1440p converge, as the CPU would not be able to process frames fast enough to keep up with the GPU at lower resolutions. The data shows a clear separation in FPS across all resolutions, suggesting the CPU is keeping pace.
The CPU’s average benchmark score of 24673 and its position in the 82nd percentile of all CPUs confirm its strength. Its nearest rivals, the Intel Core i7-1360P and AMD Ryzen 5 7600X3D, are within 0.2% and 0.3% of its score, respectively, showing that it is competitive with modern processors. In the context of this game, the CPU’s job is to handle game logic and physics, and its strong multi-core and single-core performance ensures that this is not a source of frame rate drops.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the RX 7700 XT delivers high frame rates across all presets. The Low preset averages 193.8 FPS, which is the highest measured result. The Medium preset averages 152.7 FPS, while the High preset averages 126.1 FPS. The most demanding Ultra preset still manages an average of 98.9 FPS. These numbers indicate that 1080p is not a challenge for this GPU, allowing for maximum settings or very high refresh rates.
Moving to 2560x1440, the performance remains strong but shows the expected impact of increased resolution. The Low preset averages 129 FPS, which is still very high. The Medium preset averages 101.2 FPS, and the High preset averages 84.4 FPS. The Ultra preset is the only one that dips below 70 FPS, with an average of 67.8 FPS. This resolution offers a good balance of visual fidelity and performance, as even the High preset provides a smooth experience.
At 3840x2160, the GPU is clearly pushed to its limits. The Low preset averages 67.6 FPS, which is the only setting that maintains a high refresh rate. The Medium preset averages 50.6 FPS, and the High preset averages 44.6 FPS. The Ultra preset drops to an average of 32.4 FPS. This demonstrates that while 4K is possible with this combination, it requires significant compromises in graphical settings to achieve a playable frame rate.
Hardware Specifications
AMD Ryzen 7 5700X3D
AMD Radeon RX 7700 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X3D + AMD Radeon RX 7700 XT in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 67.6 |
| 3840x2160 | Medium | 50.6 |
| 3840x2160 | High | 44.6 |
| 3840x2160 | Ultra | 32.4 |
| 2560x1440 | Low | 129.0 |
| 2560x1440 | Medium | 101.2 |
| 2560x1440 | High | 84.4 |
| 2560x1440 | Ultra | 67.8 |
| 1920x1080 | Low | 193.8 |
| 1920x1080 | Medium | 152.7 |
| 1920x1080 | High | 126.1 |
| 1920x1080 | Ultra | 98.9 |
The Technomancer with Ryzen 7 5700X3D + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with RX 7700 XT + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X3D + RX 7700 XT
Explore FPS benchmarks for other games using this same hardware combination.