The Technomancer

The Technomancer

AVERAGE FPS
70
good

This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 31 42 54
1440p QHD 45 60 69 92
1080p Full HD 74 93 113 140

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 54
3840x2160 Medium 42
3840x2160 High 31
3840x2160 Ultra 23
2560x1440 Low 92
2560x1440 Medium 69
2560x1440 High 60
2560x1440 Ultra 45
1920x1080 Low 140
1920x1080 Medium 113
1920x1080 High 93
1920x1080 Ultra 74

The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 6600 XT, In-Depth Analysis

# The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 6600 XT

The Technomancer, a 2016 Action RPG, presents an interesting test case for this pairing of AMD's Ryzen 7 5700X3D and Radeon RX 6600 XT. The measured data reveals a system that scales predictably across resolutions, but with notable performance cliffs at the highest settings. The combination ranks 1244th out of 1656 tested combos, placing it in the lower-middle tier of the database, yet the actual frame rates tell a more nuanced story about where this hardware excels and where it struggles.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals a GPU-bound scenario at higher resolutions. At Low settings, the system delivers 140.4 FPS at 1920x1080, drops to 91.5 FPS at 2560x1440, and falls to 53.7 FPS at 3840x2160. This represents a 35% reduction going from 1080p to 1440p, and another 41% drop moving to 4K. The scaling is roughly linear with pixel count, suggesting the RX 6600 XT is the primary limiter rather than the CPU.

At Ultra settings, the pattern becomes even more pronounced. The system manages 74.2 FPS at 1080p, but this collapses to 44.6 FPS at 1440p and a barely playable 23.4 FPS at 4K. The 4K Ultra result is less than one-third of the 1080p Low figure, indicating that the GPU's compute and memory bandwidth are being saturated. The data implies that The Technomancer's engine scales poorly with pixel count when shader complexity is high, making 4K Ultra essentially unplayable on this hardware.

Interestingly, the gap between Low and Ultra settings widens as resolution increases. At 1080p, the difference is 66.2 FPS (140.4 vs 74.2), but at 4K it narrows to 30.3 FPS (53.7 vs 23.4). This narrowing suggests that at lower resolutions, the CPU can feed enough frames to expose the GPU's full capability, while at 4K, the GPU is so heavily loaded that reducing settings yields diminishing returns. The limiting component shifts from a balanced workload at 1080p to purely GPU-bound at 4K.

GPU Role

The RX 6600 XT brings 8 GB of GDDR6 memory on a 128-bit bus, delivering 256.0 GB/s of bandwidth. This memory configuration appears adequate for 1080p and 1440p gaming in The Technomancer, but the 4K results suggest the 8 GB capacity or bandwidth may be constraining performance. The card's boost clock of 2589 MHz and game clock of 2359 MHz are reasonably high, yet the 4K Ultra result of 23.4 FPS indicates the shader workload overwhelms the 2048 shading units.

The GPU's 32 ray accelerators are part of the RDNA 2.0 architecture, though The Technomancer predates widespread ray tracing adoption, so these likely have minimal impact. The card's pixel rate of 165.7 GPixel/s and texture rate of 331.4 GTexel/s are respectable for its class, but the 4K results show these are insufficient for ultra-quality rendering at that resolution. The FP32 throughput of 10.60 TFLOPS provides context: at 4K Ultra, the engine's complexity exceeds what this compute capacity can handle in real-time.

The memory subsystem, with its 128-bit bus and 2000 MHz memory clock (16 Gbps effective), appears to be a bottleneck in high-resolution scenarios. The bandwidth of 256.0 GB/s is notably lower than what higher-tier cards offer, and the data suggests this limits performance when texture loads increase at 1440p and 4K. The GPU's nearest rival, the NVIDIA GeForce GTX 980 Ti, scores nearly identically in average benchmarks (27956 vs 27985, a 0.1% delta), yet the RX 6600 XT benefits from newer architecture features that may help in specific scenarios.

How This Combo Ranks

With a combo rank of 1244 out of 1656 tested combinations, this pairing sits in the 75th percentile of tested systems, meaning approximately one-quarter of combinations perform worse. The Ryzen 7 5700X3D holds an 82nd percentile ranking among all CPUs, while the RX 6600 XT sits at the 71st percentile among GPUs. The combo rank being lower than either component's individual percentile suggests that The Technomancer's specific workload does not favor this pairing as much as general benchmarks would indicate.

The CPU's nearest rivals in average score include the Intel Core i7-1360P (0.2% ahead), AMD Ryzen 5 7600X3D (0.3% ahead), and Intel Core i5-11600 (0.5% ahead), while the AMD Ryzen AI Max 385 trails by 0.6%. These minuscule deltas indicate the 5700X3D is extremely competitive in synthetic benchmarks, yet the game's performance may be more dependent on GPU capabilities. The GPU's rivals show similar clustering: the GTX 980 Ti is 0.1% behind, the Radeon R9 M395X is 0.4% behind, but the RTX 3070 is 0.9% ahead and the FirePro S7150 is 1.5% ahead.

The rank disparity suggests that while both components are solid individually, their combination in this particular game yields results that are slightly below what their respective percentiles would predict. This could be due to the game's age and its engine's utilization of modern hardware features, or it may reflect a CPU-GPU balance that is not optimal for The Technomancer's specific rendering pipeline.

Measured FPS Breakdown

At 1920x1080, the system delivers strong performance across all settings. Low produces 140.4 FPS, Medium drops to 113.1 FPS, High manages 93.3 FPS, and Ultra still achieves a smooth 74.2 FPS. These numbers indicate that 1080p gaming is entirely viable at any quality level, with even the most demanding preset maintaining a comfortable margin above 60 FPS.

Moving to 2560x1440, the performance remains playable but with stricter limits. Low settings yield 91.5 FPS, Medium provides 68.7 FPS, High reaches 60.2 FPS, and Ultra falls to 44.6 FPS. The High setting barely maintains 60 FPS, while Ultra drops below the 60 FPS threshold that many consider essential for smooth gameplay. This resolution represents the practical ceiling for high-quality gaming on this hardware.

At 3840x2160, the results become marginal. Low settings produce 53.7 FPS, which is playable but not ideal. Medium drops to 41.8 FPS, High falls to 30.5 FPS, and Ultra collapses to 23.4 FPS. Only Low settings at 4K approach acceptable frame rates, and even then, the experience would be borderline. The data clearly shows that 4K gaming requires significant setting compromises.

Settings Recommendations

For 1920x1080 users, Ultra settings at 74.2 FPS provide the best experience, offering the highest visual quality while maintaining smooth performance. The 93.3 FPS at High is also excellent, but the Ultra preset's 74.2 FPS is well within the playable range and represents the best visual fidelity per frame rate cost.

At 2560x1440, High settings at 60.2 FPS offer the best balance between visual quality and performance. The Medium preset at 68.7 FPS provides a safety margin, but High's 60.2 FPS is just at the threshold, making it suitable for most users. Ultra at 44.6 FPS is too low for competitive play but might be acceptable for slower-paced exploration in this Action RPG.

For 3840x2160, Low settings at 53.7 FPS are the only reasonable option, and even this requires accepting significant visual compromises. Medium at 41.8 FPS could work for users who prioritize image quality over smoothness, but the frame rate drops below what most would consider optimally playable. Ultra at 23.4 FPS is effectively a slideshow and should be avoided.

CPU Role

The Ryzen 7 5700X3D features 8 cores and 16 threads, with a base clock of 3.00 GHz and boost clock of 4.10 GHz. Its 96 MB of shared L3 cache is a distinguishing feature that benefits gaming workloads, though The Technomancer's age may limit how much it can exploit this cache. The CPU's passmark multithread score of 26318 and single-thread score of 2970 indicate solid performance, with its Cinebench R23 multicore score of 22366 being particularly strong.

The CPU's benchmark performance shows it is well-balanced: the 3dmark scores scale from 804 single-thread to 6764 at 16 threads, indicating good multi-threading scaling. The Geekbench multicore score of 10108 versus single-core of 1922 shows a 5.3x improvement from multi-threading, which is reasonable for an 8-core/16-thread processor. The nearest rival comparisons show the 5700X3D is within 0.5% of its closest competitors, suggesting the CPU is not a differentiator in this game's performance.

However, the 5700X3D's memory bandwidth of 51.2 GB/s with dual-channel DDR4 support might be a limitation in The Technomancer, particularly at lower resolutions where the GPU is less stressed. The CPU's PCIe Gen 4 support with 20 lanes ensures it can feed the GPU adequately, but the game's engine may not leverage the full capability of the 3D V-Cache design. The data suggests that the CPU is more than sufficient for this game, as evidenced by the significant FPS differences between resolutions that point to GPU limitation rather than CPU bottlenecking.

FAQ

Q: What is the best resolution for this hardware in The Technomancer?

A: The data shows 1920x1080 Ultra at 74.2 FPS provides the best experience, with 2560x1440 High at 60.2 FPS being a viable alternative for higher resolution. 4K is only playable at Low settings with 53.7 FPS.

Q: How does the RX 6600 XT compare to its nearest rivals in this game?

A: The RX 6600 XT averages 27985 in benchmarks, with the GTX 980 Ti being 0.1% lower (27956) and the R9 M395X 0.4% lower (27883). The RTX 3070 is 0.9% higher at 28238.

Q: Is the Ryzen 7 5700X3D a bottleneck at 1080p?

A: The 1080p Low result of 140.4 FPS versus 4K Low at 53.7 FPS indicates GPU limitation, not CPU bottleneck. The CPU's 82nd percentile ranking and close rival scores suggest it is not the limiting factor.

Q: Can this system handle 4K gaming in The Technomancer?

A: Only at Low settings, where it achieves 53.7 FPS. Medium drops to 41.8 FPS, High to 30.5 FPS, and Ultra to 23.4 FPS, making 4K gaming impractical except at minimum quality.

Q: What settings should be used for 1440p gaming?

A: High settings at 60.2 FPS is the recommended balance. Medium provides 68.7 FPS for extra smoothness, while Ultra at 44.6 FPS sacrifices too much performance for visual gains.

Q: How does this combo rank compared to other tested systems?

A: It ranks 1244th out of 1656 combos, placing it in the lower-middle tier. The CPU ranks in the 82nd percentile and GPU in the 71st percentile individually, but the combined rank is lower than either component's percentile suggests.

Hardware Specifications

AMD Ryzen 7 5700X3D

Cores / Threads 8 / 16
Base Clock 3000 MHz
Boost Clock 4100 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 6600 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2589 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700X3D + AMD Radeon RX 6600 XT in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 53.7
3840x2160 Medium 41.8
3840x2160 High 30.5
3840x2160 Ultra 23.4
2560x1440 Low 91.5
2560x1440 Medium 68.7
2560x1440 High 60.2
2560x1440 Ultra 44.6
1920x1080 Low 140.4
1920x1080 Medium 113.1
1920x1080 High 93.3
1920x1080 Ultra 74.2

The Technomancer with Ryzen 7 5700X3D + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 6600 XT + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with Ryzen 7 5700X3D + RX 6600 XT

Explore FPS benchmarks for other games using this same hardware combination.