The Technomancer

# The Technomancer with AMD Ryzen 5 7600 + AMD Radeon RX 7600

The Technomancer, a 2016 Action RPG, presents an interesting test for the AMD Ryzen 5 7600 paired with the AMD Radeon RX 7600. This combination lands at rank 2550 out of 3696 tested combos for this game, placing it in the lower-middle portion of the field. The measured data reveals a system that handles 1080p gaming comfortably, struggles at 4K, and shows a clear performance hierarchy across the four graphics presets. What follows is a detailed examination of how this pairing behaves under different resolutions and settings, what the bottleneck patterns suggest, and where the optimal experience lies.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and tells a clear story about which component governs performance at higher resolutions. At High settings, the average frame rate falls from 94 FPS at 1920x1080 to 61 FPS at 2560x1440, then plunges to 34 FPS at 3840x2160. That represents a 35% loss when moving from 1080p to 1440p, and another 44% loss going from 1440p to 4K. The scaling is steep and consistent, indicating that the GPU is the primary constraint as resolution climbs.

Low settings show similar behavior: 143 FPS at 1080p drops to 93 FPS at 1440p (a 35% reduction), and then to 51 FPS at 4K (a 45% reduction from 1440p). Medium settings follow the pattern with 110 FPS at 1080p, 72 FPS at 1440p, and 39 FPS at 4K. Ultra settings start at 73 FPS at 1080p, fall to 48 FPS at 1440p, and bottom out at 26 FPS at 4K.

The consistency of these percentage drops across all four settings levels points to a resolution-bound scenario. When the pixel count quadruples from 1080p to 4K, the frame rate roughly halves — classic GPU-limited behavior. The CPU, with its 6 cores and 12 threads based on Zen 4 architecture, clearly has headroom to spare at lower resolutions. The fact that even Low settings at 4K only manage 51 FPS suggests that the Radeon RX 7600's 8 GB of GDDR6 memory and 128-bit bus are the limiting factors, not the processor.

How This Combo Ranks

This pairing sits at rank 2550 out of 3696 combos tested in The Technomancer, which places it in the 31st percentile of all tested systems. That is a modest showing for a modern CPU and GPU combination. The percentileVsAllGpus score for the RX 7600 is 57, meaning the GPU outperforms 57% of all GPUs in general benchmarks, yet in this specific game, the combo ranks lower than that general percentile would suggest. This discrepancy hints that The Technomancer may favor other hardware configurations, or that the game's demands are unevenly distributed between CPU and GPU.

The CPU itself has a percentileVsAllCpus of 78, indicating it beats 78% of all CPUs in general processing benchmarks. The gap between the CPU's strong general showing (78th percentile) and the combo's in-game ranking (31st percentile) is telling. It suggests that the GPU is holding this pairing back in this particular title, or that The Technomancer's engine doesn't scale well with the hardware strengths of this combination.

When comparing to the GPU's nearest rivals in general benchmarks, the RX 7600 is essentially neck-and-neck with the NVIDIA GeForce RTX 3050 OEM (deltaPct of -0.2, meaning the RX 7600 is 0.2% behind) and the AMD Radeon 680M (deltaPct of -0.7, or 0.7% behind). The CPU's nearest rivals show a similarly tight grouping, with the AMD Ryzen 9 6900HX just 0.2% ahead and the Intel Core i9-11900KF 0.4% ahead. This means the combo's rank is not due to an unusually weak component, but rather the specific demands of The Technomancer.

GPU Role

The AMD Radeon RX 7600 brings 8 GB of GDDR6 memory on a 128-bit bus, delivering 288.0 GB/s of bandwidth. Its base clock runs at 1720 MHz, with a boost clock of 2655 MHz and a game clock of 2250 MHz. These specifications position it as a mid-range GPU, and the measured FPS data confirms that characterization in The Technomancer.

At 1080p, the GPU demonstrates solid capability. Low settings produce 143 FPS, Medium hits 110 FPS, High reaches 94 FPS, and even Ultra manages 73 FPS. These numbers suggest the GPU has enough raw throughput for smooth gameplay at 1080p across all presets. However, the gap between Low and Ultra at 1080p is a 49% reduction in frame rate (143 down to 73), which indicates that the higher presets are substantially increasing the GPU's workload.

The 4K results are less flattering. Even at Low settings, the RX 7600 only averages 51 FPS, and Ultra drops to 26 FPS. This aligns with the GPU's modest memory bandwidth and 8 GB frame buffer. At 3840x2160, the pixel count overwhelms the 128-bit memory interface, and the data shows this clearly: High settings at 4K (34 FPS) are barely half of High settings at 1440p (61 FPS). The GPU's general benchmark scores — such as 16634 in Passmark G3D and 2310 in 3DMark Steel Nomad DX12 — place it in the 57th percentile of all GPUs, but the 4K results in this game fall well below what that percentile might suggest.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: The data shows 1920x1080 as the only resolution where all four presets maintain playable frame rates, ranging from 73 FPS at Ultra to 143 FPS at Low. At 2560x1440, Ultra drops to 48 FPS, and at 3840x2160, even High settings only reach 34 FPS.

Q: How much faster is Low compared to Ultra at each resolution?

A: At 1080p, Low is 96% faster than Ultra (143 FPS vs 73 FPS). At 1440p, Low is 94% faster (93 FPS vs 48 FPS). At 4K, Low is 96% faster (51 FPS vs 26 FPS). The relative gap between presets remains consistent across resolutions.

Q: Does this combo struggle more at 4K than at lower resolutions?

A: Yes, significantly. The frame rate at 4K Ultra (26 FPS) is less than half of the 1080p Ultra result (73 FPS). Even at 4K Low, the 51 FPS average is below the 1080p Ultra figure, indicating the GPU cannot sustain high performance when pixel count increases.

Q: How does the CPU's general performance compare to its in-game ranking?

A: The Ryzen 5 7600 ranks in the 78th percentile of all CPUs based on its average benchmark score of 26324, but the full combo ranks 2550th out of 3696 in this game. This suggests the CPU is not the limiting factor in The Technomancer.

Q: What is the frame time consistency like at Medium settings?

A: The measured data includes min and max FPS only for Medium settings. At 1080p Medium, the range is 93 to 126 FPS around a 110 average. At 1440p Medium, it spans 61 to 82 FPS around a 72 average. At 4K Medium, it ranges from 33 to 45 FPS around a 39 average.

Q: Is the RX 7600 comparable to other GPUs in general benchmarks?

A: The RX 7600's average benchmark score of 15171 is nearly identical to its nearest rivals: the RTX 3050 OEM scores 15199 (0.2% ahead), the Radeon 680M scores 15270 (0.7% ahead), and the Radeon Pro 560X scores 15082 (0.6% behind).

Settings Recommendations

The measured data provides a clear hierarchy of settings for each resolution, and the optimal choice depends on the target frame rate. For 1080p, all settings are viable, but High at 94 FPS offers a strong balance of visual quality and performance headroom above the 60 FPS threshold. Medium at 110 FPS provides additional smoothness with a modest visual trade-off. Ultra at 73 FPS is still playable and represents the best visual experience at this resolution.

At 1440p, the picture changes. High settings produce 61 FPS, which is right at the standard 60 FPS target. Medium delivers 72 FPS, offering a more comfortable margin. Low reaches 93 FPS for those prioritizing frame rate above all else. Ultra at 48 FPS falls below the 60 FPS mark and may feel less fluid depending on the display's refresh rate and the user's sensitivity to frame pacing.

At 4K, none of the presets achieve 60 FPS. Medium settings at 39 FPS and High at 34 FPS are the best options for visual fidelity, while Low at 51 FPS is the smoothest but still below ideal. Ultra at 26 FPS is only suitable for users who prioritize image quality over gameplay responsiveness. Across all resolutions, Medium and High provide the most sensible compromise between quality and performance, with the data showing that the jump from Medium to Ultra costs roughly 34% of the frame rate at every resolution.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael, manufactured on a 5 nm process at TSMC. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz, with 32 MB of shared L3 cache and 1 MB of L2 cache per core. The CPU supports DDR5 memory with dual-channel configuration and a memory bandwidth of 83.2 GB/s, and it connects via PCIe Gen 5 with 24 lanes.

In general benchmarks, this CPU shows strong multi-threaded performance: Cinebench R23 multicore scores 12735, Geekbench multicore reaches 13413, and the Passmark multithread score is 27058. Single-thread performance is also solid, with Cinebench R23 singlecore at 1852 and Geekbench singlecore at 2521. The average benchmark score of 26324 places it in the 78th percentile of all CPUs.

In The Technomancer, however, the data suggests the CPU is not the bottleneck at any resolution. The frame rate drops are consistent with GPU-bound behavior across all settings — if the CPU were limiting, we would expect the 1080p Low result (143 FPS) to plateau regardless of resolution changes, but instead it scales down proportionally with pixel count. The 4K Low result of 51 FPS versus the 1080p Low result of 143 FPS indicates the GPU is doing most of the heavy lifting. The CPU's 6 cores and 12 threads appear sufficient for this game's demands, and its high single-thread performance (Passmark single thread score of 3910) likely prevents any CPU-induced frame dips at lower resolutions.

Measured FPS Breakdown

The complete measured FPS data for this combination is as follows:

At 1920x1080, Low settings average 143 FPS. Medium settings average 110 FPS, with a minimum of 93 FPS and a maximum of 126 FPS. High settings average 94 FPS. Ultra settings average 73 FPS. This gives a spread of 70 FPS between the lowest and highest presets.

At 2560x1440, Low settings average 93 FPS. Medium settings average 72 FPS, with a minimum of 61 FPS and a maximum of 82 FPS. High settings average 61 FPS. Ultra settings average 48 FPS. The spread here is 45 FPS between Low and Ultra, showing a compression of the performance range at higher resolution.

At 3840x2160, Low settings average 51 FPS. Medium settings average 39 FPS, with a minimum of 33 FPS and a maximum of 45 FPS. High settings average 34 FPS. Ultra settings average 26 FPS. The spread narrows further to 25 FPS, illustrating how the GPU becomes increasingly overwhelmed as resolution increases.

The Medium preset is the only one with min and max FPS measurements, providing insight into frame consistency. At 1080p Medium, the 93 FPS minimum still exceeds the 60 FPS target, while at 1440p Medium, the 61 FPS minimum barely clears it. At 4K Medium, the 33 FPS minimum indicates noticeable frame drops below the 39 FPS average, suggesting uneven performance when the GPU is heavily loaded.

These numbers paint a complete picture: 1080p is fully playable across all presets, 1440p is viable at Medium and High with some trade-offs, and 4K is only marginally playable at Low settings. The data consistently shows a GPU-limited system where the RX 7600's 8 GB memory and 128-bit bus define the performance ceiling, while the Ryzen 5 7600's processing power goes largely untapped in this title.