The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload for modern hardware. This analysis examines the measured performance of the AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 3060 Ti, focusing strictly on the benchmark data collected for this specific configuration. The results reveal a pairing that is capable at mainstream resolutions but becomes heavily constrained as pixel count and graphical fidelity increase, painting a clear picture of where this combo's strengths and limitations lie.

Resolution Scaling

The performance drop from 1080p to 4K is dramatic and clearly illustrates the shift in system bottleneck from the CPU to the GPU. At the High preset, the average frame rate falls from 95.6 FPS at 1920x1080 to 61.4 FPS at 2560x1440, a substantial reduction of 34.2 FPS. Pushing further to 3840x2160 yields an average of just 33.6 FPS, which is a 62 FPS drop from the 1080p result. This steep decline indicates that the GeForce RTX 3060 Ti is the primary limiting factor at higher resolutions, as the rendering load on the GPU grows exponentially.

The scaling pattern across all settings confirms this. At 1080p, the Ryzen 5 7600 has enough headroom to feed the GPU, but at 4K, the GPU's compute and memory bandwidth are saturated. The difference between the Low and Ultra presets at 4K is 26 FPS (53.8 vs 27.8), showing that the GPU is struggling to maintain playable frame rates even on lower settings. The data suggests that for this title, the sweet spot for this combo is 1440p, where the GPU can still produce high frame rates without being completely overwhelmed, whereas 4K is only viable for less demanding settings.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture and features 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. With a boost clock of 1665 MHz and 4864 shading units, it delivers a peak FP32 performance of 16.20 TFLOPS. In The Technomancer, these specifications directly dictate the frame rates observed. The 8 GB VRAM capacity appears sufficient for the tested presets, as the frame rates scale consistently with resolution and settings without signs of a hard memory cap being hit.

The GPU's performance percentile of 69 versus all GPUs indicates it is a mid-range to upper-mid-range part. The benchmark results show that its compute power is the deciding factor in this game. At 1080p Ultra, the card manages 76.2 FPS, but this drops to 45.7 FPS at 1440p Ultra and plummets to 27.8 FPS at 4K Ultra. This steep curve is typical of a GPU whose raw throughput is challenged by higher resolutions. The GPU's role is clear: it provides a solid 1080p and capable 1440p experience, but it is the component that holds the system back from achieving high refresh rates at 4K.

How This Combo Ranks

Within the database of tested combinations, this pairing of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3060 Ti ranks 1172 out of 1656 combos for The Technomancer. This places it in the lower half of all tested systems, suggesting that while it is a functional pairing, many other hardware combinations deliver higher average frame rates in this specific title. The rank is a product of the GPU's limitations at higher resolutions, which are heavily weighted in the overall ranking.

The individual components have differing standings. The Ryzen 5 7600 CPU has an average benchmark score of 26617 and sits in the 83rd percentile of all CPUs, indicating strong processing power. Its nearest rivals, such as the AMD Ryzen 7 5800X3D, score 26574, a delta of just 0.2%, and the Intel Core i9-12900HK scores 26672, a delta of -0.2%. This shows the CPU is highly competitive and not a bottleneck in most scenarios. Conversely, the RTX 3060 Ti has an average benchmark score of 25120 and sits in the 69th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6700M with a score of 25180 (delta -0.2%) and the AMD Radeon RX 6600 with 25235 (delta -0.5%). The combo's low rank is therefore attributable to the GPU's mid-range standing, which limits performance in a GPU-intensive game like The Technomancer, especially at higher resolutions.

Measured FPS Breakdown

The measured data provides a complete picture of performance across three resolutions and four quality presets. At 1920x1080, the combo delivers an average of 141.1 FPS on Low, 109.9 FPS on Medium, 95.6 FPS on High, and 76.2 FPS on Ultra. These numbers show that at 1080p, the system is well-balanced, with even the Ultra preset providing a smooth experience well above 60 FPS.

Moving to 2560x1440, the averages are 93.3 FPS on Low, 72.0 FPS on Medium, 61.4 FPS on High, and 45.7 FPS on Ultra. The drop is noticeable, but the High preset remains playable, while Ultra falls below the 60 FPS threshold. At 3840x2160, performance is significantly constrained: the average frame rates are 53.8 FPS on Low, 36.6 FPS on Medium, 33.6 FPS on High, and 27.8 FPS on Ultra. None of the 4K presets achieve a consistent 60 FPS, and even the Low preset can dip into uncomfortable territory.

These results show a clear hierarchy. The gap between Low and Ultra is consistent, with Ultra being roughly 45-50% slower than Low at each resolution. For example, at 1440p, the difference is 47.6 FPS (93.3 vs 45.7), and at 4K it is 26 FPS (53.8 vs 27.8). This indicates that the settings have a predictable and significant impact on GPU load, but that the GPU's absolute performance ceiling is the ultimate arbiter of playability.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo depends on the target resolution. For 1920x1080, the Ultra preset at 76.2 FPS is the clear choice. It provides the highest visual quality while maintaining a frame rate well above 60 FPS, ensuring a smooth and responsive experience. The High preset at 95.6 FPS is also excellent for users who prefer higher refresh rates.

At 2560x1440, the High preset is the recommended balance. It yields an average of 61.4 FPS, which is just above the 60 FPS target for most displays. The Medium preset at 72.0 FPS offers a more comfortable margin for frame rate stability, but at the cost of some visual fidelity. Dropping to Low at 93.3 FPS is an option for competitive play, but it negates the visual benefits of the higher resolution. The Ultra preset at 45.7 FPS is not recommended for a smooth experience, as it falls below the playable threshold.

For 3840x2160, the data indicates that this GPU is not well-suited for high-fidelity gaming. The Low preset at 53.8 FPS is the only option that comes close to a playable frame rate, and even it may experience noticeable stutter. Medium (36.6 FPS), High (33.6 FPS), and Ultra (27.8 FPS) are all too slow for a satisfying experience. Users with a 4K display should consider lowering the resolution to 1440p or reducing the in-game resolution scale to achieve acceptable performance. Ultimately, the best experience is found at 1080p with Ultra settings, or at 1440p with High settings, where the hardware can fully deliver on its performance potential.