Barony

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 7600 delivers a playable, though not overwhelmingly smooth, experience in Barony. With the data showing a maximum average of 92 FPS at 1080p Low and a minimum of 22 FPS at 4K Ultra, the combination is clearly capable of running the game, but settings and resolution choices are critical. This analysis breaks down the measured performance to identify the optimal configuration and what the numbers reveal about the hardware’s capabilities in this roguelike title.

Settings Recommendations

The measured FPS data suggests that the most balanced experience is achieved at the Medium preset across all tested resolutions. At 1080p, Medium delivers an average of 57 FPS with a minimum of 49 FPS and a maximum of 66 FPS. This is comfortably above the 30 FPS threshold for playability and provides a smooth enough frame rate for the genre's fast-paced decision-making. While Low settings push the average to 92 FPS at 1080p, the jump to High drops the average to 41 FPS, which is a more significant performance cost than the visual upgrade likely justifies. Medium at 1080p offers the best compromise between frame rate stability and visual fidelity.

For 1440p, the Medium preset again stands out. It achieves an average of 48 FPS with a minimum of 41 FPS and a maximum of 56 FPS. This is a playable experience, though the lower minimum frame rate indicates potential for stutter during intense scenes. Dropping to Low at 1440p yields a much higher 77 FPS average, which is excellent for competitive play, but the visual downgrade is substantial. High at 1440p falls to a 35 FPS average, which is near the edge of playability, and Ultra is not a viable option at 31 FPS or lower.

At 4K, the situation is more constrained. The Low preset is the only one that achieves a consistently playable frame rate, with an average of 61 FPS. Medium at 4K drops to a 38 FPS average, which is borderline, and High and Ultra are effectively unplayable at 27 FPS and 22 FPS averages, respectively. Therefore, for a 4K display, the Low preset is the clear recommendation. The data shows that Medium is the ideal setting for 1080p and 1440p, offering the best blend of performance and visual quality, while 4K users must accept Low settings for a stable experience.

GPU Role

The AMD Radeon RX 7600 is the primary driver of the performance differences seen across the settings presets. The GPU’s 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 288.0 GB/s, which is sufficient for the texture loads in Barony at most settings. However, the data implies that the GPU’s compute capabilities, not memory capacity, are the limiting factor when moving from Low to High settings. The average FPS drops consistently as settings increase, from 92 FPS at 1080p Low to 41 FPS at 1080p High, indicating that the GPU is being tasked with progressively more work.

The GPU’s clock speeds, with a base of 1720 MHz, a game clock of 2250 MHz, and a boost clock of 2655 MHz, show the card can scale its performance dynamically. The benchmark results for the RX 7600 place it in the 57th percentile of all GPUs, with an average benchmark score of 15171. Its nearest rival, the NVIDIA GeForce RTX 3050 OEM, scores slightly higher at 15199, a delta of -0.2%, showing the RX 7600 is essentially on par with that card. The performance difference between Low and High settings is far more pronounced than any difference between the RX 7600 and its direct competitors, confirming that the GPU’s raw processing power is the key variable in this game’s frame rate.

The data for Barony also shows that the GPU is the bottleneck at lower resolutions. At 1080p, the average FPS ranges from 92 to 33, and at 1440p from 77 to 27. This scaling suggests that the CPU is delivering frames fast enough, and the GPU is the component that determines the final output. The fact that the RX 7600 has 2048 shading units and 32 ray accelerators, though ray tracing is not a factor in this game, illustrates its mid-range positioning. The GPU’s performance is the central factor in the experience, and its capabilities are the reason why the Medium preset, which balances load, is the best choice.

Resolution Scaling

The FPS data reveals a clear and expected pattern of performance degradation as resolution increases. At Low settings, the average FPS drops from 92 at 1080p to 77 at 1440p, a reduction of 15 FPS, and then to 61 at 4K, a further reduction of 16 FPS. This scaling indicates that the GPU is becoming more heavily utilized as the pixel count rises. The transition from 1080p to 1440p represents a 1.78x increase in pixel count, and the FPS drop is roughly proportional, suggesting the GPU is the primary limiting component.

At Medium settings, the FPS drops from 57 at 1080p to 48 at 1440p, and then to 38 at 4K. The relative drop from 1440p to 4K is steeper, as the 4K resolution demands significantly more from the GPU’s fill rate and memory bandwidth. The RX 7600’s pixel rate is 169.9 GPixel/s and its texture rate is 339.8 GTexel/s, which are the specifications that dictate this scaling. The data suggests that at 4K, the card is working at its limits, and even the jump from Medium to Low is necessary to maintain a playable frame rate.

The scaling at High settings is even more dramatic, with FPS dropping from 41 at 1080p to 35 at 1440p, and then to a mere 27 at 4K. This steep decline at 4K highlights the GPU’s inability to handle the higher settings at that resolution. The frame time data, where available, shows that the minimum FPS at 1080p Medium is 49, while at 1440p Medium it is 41, and at 4K Medium it is 32. This consistent decrease in the minimum frame rate indicates that the GPU is not only reducing the average output but also struggling more to maintain consistent frame pacing at higher resolutions, making the experience less stable.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the performance across all tested configurations. At 1920x1080, the Low preset delivers the highest average FPS of 92. The Medium preset follows with an average of 57 FPS, with a minimum of 49 FPS and a maximum of 66 FPS. The High preset drops to an average of 41 FPS, and the Ultra preset falls to an average of 33 FPS, which is below the ideal playability threshold.

Moving to 2560x1440, the Low preset achieves an average of 77 FPS. The Medium preset averages 48 FPS, with a minimum of 41 FPS and a maximum of 56 FPS. The High preset drops to an average of 35 FPS, and the Ultra preset falls to an average of 27 FPS. The data shows a consistent pattern where each step up in settings costs roughly 10-15 FPS at this resolution.

At 3840x2160, the Low preset is the only one that maintains a high average, at 61 FPS. The Medium preset averages 38 FPS, with a minimum of 32 FPS and a maximum of 44 FPS. The High preset drops to an average of 27 FPS, and the Ultra preset falls to an average of 22 FPS. The Ultra preset at 4K is the lowest score in the entire dataset, showing that this combination is not suited for maximum settings at high resolutions. The data clearly shows that the GPU is the limiting factor, as even the fastest settings at 4K cannot match the performance of lower settings at 1080p.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600 and the AMD Radeon RX 7600 ranks 3705 out of 3717 tested combos in Barony. This places it in the bottom 0.3% of all tested configurations, which is a remarkably low ranking. This does not mean the experience is broken, but it indicates that the vast majority of other hardware combinations tested perform better in this specific game. The data suggests that Barony is a game that favors higher-end hardware, and this mid-range combo is at the lower end of the performance spectrum.

This low rank is surprising given the individual components’ standings. The CPU, the Ryzen 5 7600, is in the 78th percentile of all CPUs, with an average benchmark score of 26324. Its nearest rivals, the AMD Ryzen 9 6900HX and the Intel Core i9-11900KF, have scores of 26274 and 26212, respectively, with deltas of 0.2% and 0.4%. The GPU, the RX 7600, is in the 57th percentile of all GPUs, with an average score of 15171. Despite these respectable individual rankings, the combo’s in-game rank is very low, implying that Barony may be sensitive to specific hardware characteristics not captured by the general benchmarks, such as memory latency or driver optimizations.

The implication is that while the components are competent in synthetic tests, the game itself may not utilize them effectively. The rank suggests that for Barony, other combinations of CPUs and GPUs, even those with lower individual benchmark scores, may provide a better experience. The data from the game’s measured FPS shows that the combo can run the game, but the low rank indicates that it is not a preferred pairing for this title. The performance is playable at lower settings, but it is far from a top-tier result, and users seeking the best possible Barony experience would need to look at other hardware.

FAQ

Q: What is the highest average FPS this combo can achieve in Barony?

A: The highest average FPS recorded is 92, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: Is this combo capable of playing Barony at 4K resolution?

A: Yes, it can play at 4K, but only at the Low settings preset, which achieves an average of 61 FPS. Higher settings at 4K result in averages below 40 FPS, which are not consistently playable.

Q: How does the performance at 1440p Medium compare to 1080p High?

A: At 1440p Medium, the average FPS is 48, while at 1080p High, the average FPS is 41. This shows that the Medium preset at a higher resolution can outperform the High preset at a lower resolution, suggesting the settings preset has a larger impact than resolution alone.

Q: What is the combo’s rank compared to all other tested combinations?

A: The combo ranks 3705 out of 3717 tested combinations, placing it in the bottom 0.3% of all tested hardware pairings for Barony.

Q: Which component is more likely to be the bottleneck in this game?

A: The data indicates the GPU is the primary bottleneck. The FPS scales directly with the settings preset and resolution, both of which heavily load the GPU. The CPU’s high percentile ranking suggests it is not the limiting factor.

Q: What is the lowest average FPS recorded for this combo?

A: The lowest average FPS recorded is 22, which occurs at 3840x2160 resolution with the Ultra settings preset.

CPU Role

The AMD Ryzen 5 7600, with its 6 cores and 12 threads, provides the processing foundation for this combo. Its base clock of 3.80 GHz and boost clock of 5.10 GHz are derived from the Zen 4 architecture, built on a 5 nm process. The CPU’s 32 MB of shared L3 cache and dual-channel DDR5 memory support are key specifications for feeding the GPU. In general benchmarks, the CPU scores 12735 in Cinebench R23 multi-core and 1852 in single-core, which are respectable figures that place it in the 78th percentile of all CPUs.

In the context of Barony, the CPU’s role appears to be secondary to the GPU. The FPS data shows a clear dependence on settings and resolution, which are GPU-bound tasks. The CPU is likely responsible for the game’s logic, enemy AI, and procedural generation, but the measured FPS at Low settings (92 FPS at 1080p) suggests that the CPU is capable of handling these tasks without becoming a bottleneck. The fact that the FPS drops so significantly with higher settings indicates that the GPU is unable to keep up with the increased visual load, not the CPU.

The CPU’s performance relative to its rivals, such as the AMD Ryzen 9 6900HX and the Intel Core i9-11900KF, with deltas of 0.2% and 0.4%, shows it is competitive in synthetic tests. However, the combo’s low rank in Barony suggests that even a strong CPU cannot compensate for the GPU’s limitations in this game. The data implies that the CPU provides a solid foundation, but the gaming experience is ultimately dictated by the GPU’s performance. The CPU’s high benchmark scores do not translate to a high in-game rank, indicating that Barony is not a CPU-intensive title and that the processor’s capabilities are not the limiting factor in this hardware pairing.