The Technomancer

# The Technomancer with AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 5070

The AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 5070 delivers a robust experience in The Technomancer, a 2016 action RPG that remains demanding at higher resolutions. Measured FPS data across three resolutions and four quality presets shows a combination that scales predictably with resolution, with the GPU becoming the primary constraint at 4K while the CPU's substantial cache and six-core architecture keep frame rates high at lower resolutions. The combo ranks 532nd out of 2,825 tested combinations, placing it in the top 19% of all tested systems for this title.

Resolution Scaling

The FPS progression from 1080p to 4K reveals a classic GPU-bound scaling pattern. At 1920x1080 with Low settings, the system produces 249 FPS, which drops to 162 FPS at 2560x1440 and further to 89 FPS at 3840x2160. That represents a 35% reduction from 1080p to 1440p, and a further 45% reduction from 1440p to 4K, totaling a 64% drop from 1080p to 4K at Low settings. This steep decline indicates that the RTX 5070's rendering workload—not the CPU—is the limiting factor as pixel count increases.

The High preset shows similar behavior: 163 FPS at 1080p, 107 FPS at 1440p, and 59 FPS at 4K. The percentage drops here are 34% and 45% respectively, closely mirroring the Low preset's scaling. Medium settings follow the same pattern, with 191 FPS at 1080p, 125 FPS at 1440p, and 69 FPS at 4K—a 35% and 45% reduction per step. Ultra settings produce 127 FPS at 1080p, 83 FPS at 1440p, and 46 FPS at 4K, with drops of 35% and 45%.

The consistency of these percentage drops across all four presets is notable. It suggests that The Technomancer's rendering pipeline is well-behaved and that the RTX 5070's performance scales linearly with resolution, independent of quality settings. The 4K Ultra result of 46 FPS is the only measured row below the 60 FPS threshold, indicating that 4K gaming requires either a lower preset or accepting sub-60 performance. At 1440p, every preset except Ultra exceeds 100 FPS, making this resolution the sweet spot for high-refresh-rate displays. The 1080p results, ranging from 127 to 249 FPS, show that the CPU overhead is minimal even at very high frame rates.

GPU Role

The NVIDIA GeForce RTX 5070, built on the Blackwell 2.0 architecture with the GB205 chip, is the dominant contributor to this game's performance. Its 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is ample for The Technomancer's textures and geometry at all tested settings. The memory clock runs at 1750 MHz (28 Gbps effective), and the GPU's base clock of 2325 MHz boosts to 2512 MHz, delivering 30.87 TFLOPS of FP32 compute.

The GPU's 6,144 shading units, 192 texture mapping units, and 80 raster output pipelines produce a pixel rate of 201.0 GPixel/s and a texture rate of 482.3 GTexel/s. These specifications explain the strong 4K performance: even at Ultra settings, the card maintains 46 FPS, and at High settings it reaches 59 FPS—just shy of the 60 FPS target. The 4K Low result of 89 FPS shows that the card has substantial headroom when texture quality and shading complexity are reduced.

Compared to its nearest rivals in the benchmark database, the RTX 5070's average benchmark score of 40,377 places it 0.1% ahead of the AMD Radeon Pro 580 (40,318) and 0.8% ahead of the AMD Radeon Pro WX 7100 (40,063). It trails the AMD Radeon Pro 5300 by 1.2% (40,870) and leads the NVIDIA RTX A500 Mobile by 2% (39,568). These are synthetic benchmark comparisons, not game-specific results, but they confirm that the RTX 5070 sits in a competitive mid-range tier. The GPU's percentile rank of 82 among all GPUs indicates it outperforms 82% of tested graphics cards, which aligns with its ability to deliver playable frame rates at 4K in this title.

CPU Role

The AMD Ryzen 5 7500X3D, a 6-core, 12-thread processor from the 7000 series based on Zen 4 (Raphael) architecture, plays a supporting role in The Technomancer—but an important one. Its 96 MB shared L3 cache is the standout feature, providing substantial on-die storage for game data that reduces memory latency and improves frame pacing. The CPU's base clock of 4.00 GHz boosts to 4.50 GHz, and its 65 W TDP makes it an efficient choice for sustained gaming workloads.

The CPU's benchmark scores reflect its balanced design. Its PassMark multi-thread score of 25,047 and single-thread score of 3,494 indicate strong per-core performance, which matters for a game like The Technomancer that likely relies on a few primary threads. The floating-point math score of 43,594 and integer math score of 70,774 show robust computational throughput. The CPU's percentile rank of 89 among all CPUs places it in the top 11% of tested processors, and its average benchmark score of 44,573 is competitive.

In the nearest rival comparisons, the Ryzen 5 7500X3D's average score is 0.2% higher than the Intel Core Ultra X9 388H (44,466), 0.5% higher than the Intel Core i9-13950HX (44,342), and 0.6% higher than the AMD Ryzen AI Max 385 (44,309). It trails the Intel Core i5-14600 by 0.7% (44,889). These deltas are small, but the X3D's cache advantage likely benefits gaming workloads beyond what synthetic benchmarks capture. The 1080p results in The Technomancer—249 FPS at Low settings—suggest that the CPU is not a bottleneck even at very high frame rates, as the GPU is still able to render frames quickly without being starved by the processor.

How This Combo Ranks

The combined AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5070 system ranks 532nd out of 2,825 tested combinations for The Technomancer. This places the combo in the 81st percentile of all tested configurations, meaning it outperforms roughly 81% of the systems in the database for this specific game. The rank is based on measured FPS data across the tested resolutions and settings, and it reflects a balanced system that handles both CPU-intensive and GPU-intensive workloads effectively.

This ranking is consistent with the CPU's 89th percentile and GPU's 82nd percentile individually, but the combination ranks slightly lower than either component's standalone percentile. This suggests that while each component is strong, the system's overall performance in The Technomancer is limited by the GPU at higher resolutions, pulling the combo rank down from what the CPU alone might suggest. At 1080p, where the CPU matters more, the system excels—249 FPS at Low settings is an exceptional result. At 4K, the GPU's workload dominates, and the combo's 46 FPS at Ultra settings is more modest.

The rank of 532 out of 2,825 implies that there are 531 configurations that perform better in this game, likely including higher-end GPUs like the RTX 5080 or RTX 5090, or possibly CPUs with more cores for heavily threaded scenarios. However, for a mainstream mid-range GPU paired with a high-end gaming CPU, this is a strong showing. The data indicates that the combo is well-suited for 1440p gaming, where it delivers 83-162 FPS depending on settings, and capable at 4K with adjusted quality levels.

Settings Recommendations

The measured FPS data provides clear guidance for optimizing the experience in The Technomancer. At 1920x1080, all settings are playable, with Low at 249 FPS, Medium at 191 FPS, High at 163 FPS, and Ultra at 127 FPS. Even Ultra exceeds 120 FPS, so users with 120 Hz or 144 Hz monitors can comfortably use the highest preset. The Medium preset's minimum FPS of 162 suggests consistent frame delivery, and High's 163 FPS average is nearly identical—indicating that the jump from Medium to High is free in performance terms.

At 2560x1440, the situation changes slightly. Ultra produces 83 FPS, which is smooth but not ideal for high-refresh displays. High at 107 FPS and Medium at 125 FPS are both excellent, with Medium's minimum of 106 FPS ensuring no significant dips. Low at 162 FPS is overkill unless chasing maximum frame rates. For most users, High is the recommended preset at 1440p, as it provides a 24 FPS uplift over Ultra while maintaining visual fidelity that is likely indistinguishable in fast-paced gameplay.

At 3840x2160, the choices are more constrained. Ultra at 46 FPS is below the 60 FPS threshold and may feel sluggish. High at 59 FPS is marginally below 60, but the lack of minimum FPS data means frame pacing could be inconsistent. Medium at 69 FPS with a minimum of 58 FPS is the safest choice for 4K, offering a 23 FPS improvement over Ultra and staying above 60 FPS on average. Low at 89 FPS is the only preset that provides comfortable headroom at 4K, but it sacrifices visual quality significantly. The recommendation is Medium at 4K, which balances visual fidelity with playable frame rates.

FAQ

Q: Can this system run The Technomancer at 4K with Ultra settings?

A: Yes, but just barely. The measured average FPS at 3840x2160 with Ultra settings is 46 FPS, which is below the 60 FPS target. Users seeking a smoother experience should consider Medium settings, which achieve 69 FPS.

Q: What is the best resolution for high refresh rate gaming?

A: At 1920x1080, all presets exceed 120 FPS, with Ultra reaching 127 FPS. At 2560x1440, High and Medium presets deliver 107 and 125 FPS respectively, making 1440p a viable option for 100+ Hz displays.

Q: How does the RTX 5070 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5070's average benchmark score of 40,377 is 0.1% higher than the AMD Radeon Pro 580 (40,318) and 0.8% higher than the AMD Radeon Pro WX 7100 (40,063). It is 1.2% lower than the AMD Radeon Pro 5300 (40,870) and 2% higher than the NVIDIA RTX A500 Mobile (39,568).

Q: Is the Ryzen 5 7500X3D a bottleneck at 1080p?

A: No. At 1920x1080 with Low settings, the system achieves 249 FPS, and at Ultra it reaches 127 FPS. The CPU's 96 MB L3 cache and 4.50 GHz boost clock are sufficient to feed the GPU even at high frame rates.

Q: What is the performance difference between Medium and High settings at 1440p?

A: At 2560x1440, Medium produces 125 FPS average (106 minimum), while High produces 107 FPS average. The difference is 18 FPS, or approximately 14% lower performance for High, with no minimum FPS data available for High.

Q: How does this combo rank globally for The Technomancer?

A: The combination of AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5070 ranks 532nd out of 2,825 tested combos, placing it in the top 19% of all tested systems for this game.

Measured FPS Breakdown

1920x1080 (1080p):

• Low: 249 FPS average
• Medium: 191 FPS average, 162 FPS minimum, 220 FPS maximum
• High: 163 FPS average
• Ultra: 127 FPS average

2560x1440 (1440p):

• Low: 162 FPS average
• Medium: 125 FPS average, 106 FPS minimum, 143 FPS maximum
• High: 107 FPS average
• Ultra: 83 FPS average

3840x2160 (4K):

• Low: 89 FPS average
• Medium: 69 FPS average, 58 FPS minimum, 79 FPS maximum
• High: 59 FPS average
• Ultra: 46 FPS average

The data shows a clear hierarchy: 1080p is fully playable at all settings, 1440p is optimal for high refresh rates, and 4K requires dropping to Medium or Low for smooth performance. The Medium preset consistently provides the best balance of visual quality and frame rate, with minimum FPS values that stay within 8-13% of the average across all resolutions. The RTX 5070's 12 GB GDDR7 memory and 672 GB/s bandwidth serve the game well, while the Ryzen 5 7500X3D's 6 cores and 12 threads ensure the CPU never becomes a limiting factor. This is a well-rounded combination for The Technomancer, with the only significant compromise being 4K Ultra performance.