The Technomancer

The Technomancer is an older Action RPG, but its demands on modern hardware are still significant, particularly at high resolutions. This analysis examines the measured performance of the AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 4070 SUPER across a range of settings and resolutions. The data reveals a system that is overwhelmingly powerful for 1080p and 1440p gaming, while still being viable for 4K at moderate settings. This combination ranks in the 83rd percentile for the GPU and 89th for the CPU, placing it in the upper echelon of all tested hardware configurations.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on your target resolution and refresh rate. The data shows a clear hierarchy of performance across four presets: Low, Medium, High, and Ultra.

For 1080p gaming, this hardware combination is so powerful that even the most demanding Ultra preset delivers an average of 133 FPS. This makes Ultra the clear choice for users with high-refresh-rate monitors (120Hz or above), as it provides a fully immersive experience without compromising on smoothness. If you are seeking the absolute maximum frame rate, the Low preset achieves 252 FPS, but the visual sacrifice is likely not worth the extra performance headroom at this resolution.

At 1440p, the performance scaling is still excellent. The Ultra preset falls to an average of 87 FPS, which is still very playable, but the High preset offers a more balanced experience at 111 FPS. The jump from High to Ultra costs 24 FPS, a significant drop of over 20%. For most users, the High preset at 1440p will provide the best balance of visual fidelity and performance, as it comfortably exceeds the 100 FPS threshold that is often considered the sweet spot for competitive and action games.

The 4K resolution is where the RTX 4070 SUPER begins to show its limits. Here, the Ultra preset struggles, averaging only 48 FPS, which is below the 60 FPS target for a smooth console-like experience. The High preset just manages to hit 61 FPS, making it the bare minimum for a playable 4K experience. However, the Medium preset is the standout recommendation for 4K, delivering a solid 71 FPS with a minimum of 61 FPS. This indicates that the Medium preset provides a much more stable frame rate, likely avoiding the stutters that can occur when the GPU is pushed to its absolute limit. The data strongly suggests that for the best 4K experience, you should prioritize the Medium preset.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER is the primary driver of performance in the higher resolution ranges. With 12 GB of GDDR6X memory on a 192-bit bus, it offers a substantial memory bandwidth of 504.2 GB/s. This is a critical factor for The Technomancer, as the difference between the Low and Ultra settings at 4K demonstrates a heavy load on the GPU’s memory subsystem and compute units.

The GPU's core specifications, including 7168 shading units and a boost clock of 2475 MHz, provide a massive amount of raw compute power. This is evident in the benchmark scores, with a Passmark G3D score of 29995 and an average benchmark score of 43223. These numbers place the GPU in the 83rd percentile of all GPUs, indicating it is more powerful than a large majority of competing hardware. Its nearest rivals, such as the NVIDIA Quadro M6000 24 GB, show a very small performance delta of -0.1%, meaning the RTX 4070 SUPER is essentially on par with these professional-grade cards in synthetic tests.

In terms of actual game performance, the GPU is clearly the limiting factor at 4K. The FPS drops dramatically as settings increase from Low (93 FPS) to Ultra (48 FPS), a decrease of nearly 50%. This is a classic sign of a GPU-bound scenario where the graphics card is working at its maximum capacity. At 1080p, however, the GPU has so much headroom that the frame rates are incredibly high, suggesting that the CPU is starting to become more relevant in that scenario. The data consistently shows that the RTX 4070 SUPER is a high-end card that excels at 1440p and is capable at 4K with adjusted settings.

CPU Role

The AMD Ryzen 5 7500X3D, with its 6 cores and 12 threads, plays a crucial role in ensuring the GPU is fed with enough data, especially at lower resolutions. Its key feature is the massive 96 MB of shared L3 cache, which is a hallmark of the X3D series and is highly effective in gaming workloads. The CPU is based on the Zen 4 (Raphael) architecture and is manufactured on a 5 nm process by TSMC.

The CPU's benchmark performance is strong, with a Passmark multithread score of 25047 and a single-thread score of 3494. This places it in the 89th percentile of all CPUs, with an average benchmark score of 44573. Its nearest rivals, including the Intel Core i9-13950HX, show a performance delta of only 0.5%. This indicates that the 7500X3D is competitive with some of the best mobile and desktop processors available, even those with more cores.

The CPU's influence on frame rates is most apparent when comparing resolutions. At 1080p, the difference between the Low and Ultra settings is 119 FPS (from 252 to 133). While this is still a significant drop, the absolute frame rates are so high that they suggest the CPU is capable of providing a very high maximum FPS. The fact that the Low preset at 1080p hits 252 FPS shows that the CPU is not a bottleneck in a traditional sense. However, the scaling from 1080p to 4K is not linear. For example, the High preset drops from 170 FPS at 1080p to 111 FPS at 1440p and then to 61 FPS at 4K. While the GPU is the primary cause of the drop to 4K, the CPU's ability to maintain high frame rates at 1080p reflects its gaming prowess. The 7500X3D ensures that this system will not be limited by the processor in almost any gaming scenario, including those at high refresh rates.

FAQ

Q: What is the best resolution to use with this hardware combination for a 144Hz monitor?

A: The data shows that at 1440p with the High preset, the average frame rate is 111 FPS, which is very close to a 120Hz monitor's capabilities. For 1080p, the Ultra preset delivers 133 FPS, which is more suitable for a standard 144Hz display. You would need to use the Low preset to exceed 144 FPS at 1080p.

Q: Can this system run The Technomancer at 4K smoothly?

A: Yes, but not at the highest settings. The measured data shows that the Medium preset at 4K achieves an average of 71 FPS with a minimum of 61 FPS, indicating a smooth and stable performance. The High preset is borderline at 61 FPS average, while the Ultra preset is not recommended as it drops to 48 FPS.

Q: How does the RTX 4070 SUPER compare to its closest rivals in raw benchmark scores?

A: The RTX 4070 SUPER has an average benchmark score of 43223. Its nearest rival, the NVIDIA Quadro M6000 24 GB, scores 43262, which is a performance delta of -0.1% from the RTX 4070 SUPER's perspective. This means the RTX 4070 SUPER is effectively tied with these other high-end cards in synthetic tests.

Q: Is the Ryzen 5 7500X3D a good match for the RTX 4070 SUPER?

A: The benchmark data suggests it is a very strong match. The CPU's Passmark multithread score is 25047, and its performance is comparable to other top-tier CPUs like the Intel Core i9-13950HX, which has a delta of 0.5%. This ensures the CPU will not bottleneck the GPU in most gaming workloads.

Q: What is the performance difference between the High and Ultra settings at 1440p?

A: The measured data shows the High preset averages 111 FPS, while the Ultra preset averages 87 FPS. This is a difference of 24 FPS, or a performance decrease of roughly 21% when moving from High to Ultra at 2560x1440.

Q: What is the overall ranking of this specific PC configuration for The Technomancer?

A: This combination of the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 SUPER ranks 625th out of 3696 total tested hardware combinations. This places it in the top 17% of all systems tested for this game.

Resolution Scaling

The data provides a clear picture of how performance scales as resolution increases. The most dramatic observation is the impact on the High and Ultra presets. For the High preset, the average FPS drops from 170 at 1080p to 111 at 1440p (a 35% reduction) and then to 61 at 4K (a 45% reduction from 1440p). This steep decline indicates that the system is heavily GPU-bound, as the rendering workload increases exponentially with pixel count.

The Low preset shows a similar trend, scaling from 252 FPS at 1080p to 169 FPS at 1440p and finally to 93 FPS at 4K. While the percentages are different, the trend is the same. This behavior is the classic sign of a GPU-limited scenario. The CPU, with its high single-thread score of 3494 and massive L3 cache, is able to maintain high frame rates at 1080p, but the GPU's workload becomes the primary constraint as resolution increases.

The scaling from 1440p to 4K is particularly punishing. For the Medium preset, the drop is from 130 FPS to 71 FPS. This near-halving of performance at 4K confirms that the RTX 4070 SUPER's 12 GB memory buffer and 504.2 GB/s bandwidth are sufficient for 1440p gaming but are being pushed to their limits at 4K. The data suggests that to maintain a 60+ FPS experience at 4K, you must scale back to the Medium settings, or be content with a sub-60 FPS average on the High preset. The system is a 1440p powerhouse and a capable 4K machine with moderate settings.

Measured FPS Breakdown

The following is the complete measured FPS data for The Technomancer with the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 SUPER.

1920x1080 (1080p):

• Ultra: Average 133 FPS. This is a very high frame rate, suitable for high-refresh-rate monitors.
• High: Average 170 FPS. Provides a significant performance boost over Ultra, ideal for 165Hz+ displays.
• Medium: Average 199 FPS, with a minimum of 169 and a maximum of 229 FPS. This shows excellent consistency and performance.
• Low: Average 252 FPS. This is the maximum performance setting, likely limited by the CPU's ability to feed the GPU.

2560x1440 (1440p):

• Ultra: Average 87 FPS. This is a playable frame rate for most games, but not ideal for high-refresh competitive play.
• High: Average 111 FPS. This is the recommended preset for a smooth 1440p experience, hitting the 100+ FPS mark.
• Medium: Average 130 FPS, with a minimum of 111 and a maximum of 150 FPS. This preset offers a great balance of performance and visual quality.
• Low: Average 169 FPS. This is an excellent result, showing the GPU has plenty of headroom at this resolution.

3840x2160 (4K):

• Ultra: Average 48 FPS. This is below the 60 FPS target and is considered a poor experience for a game like this.
• High: Average 61 FPS. This just meets the 60 FPS threshold for playability, but there is no headroom for demanding scenes.
• Medium: Average 71 FPS, with a minimum of 61 and a maximum of 82 FPS. This is the best choice for 4K, providing a stable and smooth experience.
• Low: Average 93 FPS. This shows that the GPU is still capable of high performance at 4K when settings are lowered.