The Technomancer

# The Technomancer with AMD Ryzen 5 5600F + AMD Radeon RX 570

The AMD Ryzen 5 5600F paired with the AMD Radeon RX 570 delivers a playable but constrained experience in The Technomancer, a 2016 Action RPG. The data shows a combo that ranks in the bottom 4% of tested configurations, with the RX 570's 4 GB GDDR5 memory and GCN 4.0 architecture proving to be the primary bottleneck at higher resolutions and settings.

FAQ

Q: How does this combo rank among all tested configurations in The Technomancer?

A: The combination ranks 2712 out of 2825 tested combos, placing it in the bottom percentile of systems evaluated for this game. This indicates that the vast majority of tested hardware configurations deliver higher average frame rates.

Q: What is the best resolution and settings for smooth gameplay?

A: At 1920x1080 with Low settings, the combo achieves 68 average FPS, which is the only configuration in the measured data that approaches high-refresh-rate territory. Medium settings at 1080p still deliver 53 average FPS, making it a viable compromise between visual quality and performance.

Q: How does the RX 570 compare to its nearest rivals in general benchmarks?

A: The RX 570's average benchmark score of 28766 places it within 1.2% of the NVIDIA Quadro RTX 8000 (28421) and 0.8% of the AMD Radeon RX 470 (28996). It trails the AMD Radeon RX 6800M by only 0.4%, showing that in synthetic tests, the card holds its own against a wide range of competitors.

Q: Is the Ryzen 5 5600F a limiting factor in this game?

A: The CPU's multi-thread benchmark score of 19236 and single-thread score of 2872 place it in the 85th percentile of all CPUs, suggesting it is not the primary constraint. The GPU's performance ceiling appears to be the limiting factor, especially at 4K where even Low settings only reach 25 average FPS.

Q: What does the FPS drop from 1080p to 4K indicate about this system?

A: At High settings, the average FPS drops from 45 at 1080p to 29 at 1440p and further to 16 at 4K. This steep decline of roughly 64% from 1080p to 4K indicates that the GPU is heavily saturated, while the CPU has ample headroom to feed frames at lower resolutions.

Q: Does the 4 GB VRAM capacity impact performance in The Technomancer?

A: The 4 GB GDDR5 memory with 224.0 GB/s bandwidth appears sufficient for 1080p gameplay, as evidenced by the playable frame rates at that resolution. However, the significant drop at 1440p and 4K suggests that memory capacity and bandwidth constraints become more pronounced at higher resolutions, limiting the card's ability to maintain consistent frame rates.

How This Combo Ranks

The combo rank of 2712 out of 2825 tested configurations places this system in the 4th percentile of all tested hardware combinations for The Technomancer. This is a low ranking that reflects the GPU's age and limited memory bandwidth rather than any deficiency in the CPU. The Ryzen 5 5600F, with its 6 cores and 12 threads based on Zen 3 architecture, is a modern processor that scores in the 85th percentile of all CPUs. Its average benchmark score of 36945 is nearly identical to the Intel Core Ultra 5 225 (36938) and only 0.5% behind the Intel Core i9-12900T (37112).

The RX 570, by contrast, is an end-of-life product from the Polaris generation, built on a 14 nm process with GCN 4.0 architecture. Its average benchmark score of 28766 places it in the 74th percentile of all GPUs. What is striking is how close the RX 570's synthetic scores are to much more modern parts: it is only 0.4% behind the AMD Radeon RX 6800M and 1.2% ahead of the NVIDIA Quadro RTX 8000. This suggests that in synthetic workloads, the card remains competitive, but in real-world gaming at higher resolutions, the 4 GB memory capacity becomes a severe constraint.

The deltaPct values for the CPU's nearest rivals are all within 0.5% of each other, indicating that the Ryzen 5 5600F is well-matched to its peers in general compute tasks. For the GPU, the nearest rival deltas range from -0.8% to +1.2%, showing a tight cluster of performance around the RX 570's score. This clustering suggests that the GPU's benchmark performance is representative of a broad mid-range tier, yet the in-game ranking reveals that The Technomancer's specific demands push this combo far down the list.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound performance degradation as resolution increases. At 1920x1080 with High settings, the combo delivers 45 average FPS. Moving to 2560x1440 drops this to 29 average FPS, a reduction of approximately 36%. At 3840x2160, the average FPS falls to 16, which is a 64% drop from the 1080p figure. This scaling behavior is characteristic of a system where the GPU's pixel throughput and memory bandwidth are the limiting factors, not the CPU.

Comparing the Low settings across resolutions reinforces this conclusion. At 1080p Low, the system achieves 68 average FPS. At 1440p Low, it drops to 45 average FPS, and at 4K Low, it falls to 25 average FPS. The consistent ratio of frame rate reduction with resolution scaling indicates that the RX 570's 224.0 GB/s memory bandwidth and 39.81 GPixel/s pixel rate are being saturated. The CPU, with its 32 MB shared L3 cache and 51.2 GB/s memory bandwidth, has more than enough headroom to keep up with the GPU's demands at all tested resolutions.

The Medium settings data provides additional insight. At 1080p Medium, the average FPS is 53 with a minimum of 45 and maximum of 60. At 1440p Medium, the average drops to 34 with a range of 29 to 40. At 4K Medium, the average is 19 with a range of 16 to 22. The narrow min-max ranges at each resolution suggest that frame pacing is consistent, without severe spikes or drops, which points to a stable but heavily loaded GPU.

Measured FPS Breakdown

At 1920x1080, the combo delivers its most playable results. Low settings produce 68 average FPS, which is the highest measured value across all configurations. Medium settings yield 53 average FPS with a minimum of 45 and maximum of 60, providing a good balance for action gameplay. High settings drop to 45 average FPS, and Ultra settings fall to 35 average FPS. The progression from Low to Ultra shows a total reduction of 33 FPS, or approximately 49%, which is a significant penalty for the visual upgrades that Ultra presets typically provide.

At 2560x1440, the performance becomes marginal for smooth gameplay. Low settings deliver 45 average FPS, which matches the 1080p High setting result. Medium settings produce 34 average FPS with a range of 29 to 40, while High settings drop to 29 average FPS and Ultra falls to 23 average FPS. The delta between Low and Ultra at 1440p is 22 FPS, a smaller absolute drop than at 1080p but a larger percentage reduction of approximately 49%.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings achieve only 25 average FPS, which is below the threshold for smooth action gameplay. Medium settings drop to 19 average FPS with a range of 16 to 22, High settings fall to 16 average FPS, and Ultra settings bottom out at 13 average FPS. None of the 4K configurations reach the 30 FPS mark, making this resolution unsuitable for The Technomancer with this hardware combination.

The Ultra settings data across resolutions tells a consistent story. At 1080p Ultra, the system achieves 35 average FPS, which is playable but not ideal. At 1440p Ultra, it drops to 23 average FPS, and at 4K Ultra, it falls to 13 average FPS. The Ultra preset appears to include effects that are particularly demanding on the RX 570's 32 ROPs and 5.095 TFLOPS of FP32 compute, making it a poor choice at any resolution above 1080p.

GPU Role

The AMD Radeon RX 570 is built on the Polaris 20 chip with GCN 4.0 architecture, fabricated on a 14 nm process at GlobalFoundries. It contains 5,700 million transistors on a 232 mm² die, with 2048 shading units, 128 TMUs, and 32 ROPs. The GPU operates at a base clock of 1168 MHz and a boost clock of 1244 MHz, with memory running at 1750 MHz (7 Gbps effective) across a 256-bit bus, yielding 224.0 GB/s of memory bandwidth.

In the context of The Technomancer, the GPU's 4 GB GDDR5 memory capacity is the most critical specification. At 1080p, the card can manage the game's memory demands, as evidenced by the 45 average FPS at High settings. However, the steep drop to 16 average FPS at 4K High suggests that the game requires more than 4 GB of VRAM at higher resolutions, causing the GPU to spill over into system memory or reduce texture quality, which impacts frame rates.

The pixel rate of 39.81 GPixel/s and texture rate of 159.2 GTexel/s are modest by modern standards, and the 5.095 TFLOPS of FP32 compute places the card in the entry-to-mid-range tier. The GPU's benchmark scores show it performing at a level very close to the AMD Radeon RX 6800M (within 0.4%) and the AMD Radeon RX 470 (within 0.8%), which suggests that the Polaris architecture scales predictably across its product stack.

The RX 570's production status is end-of-life, and its successor is the Vega generation. This means that driver optimizations for newer games may be limited, but the card's DirectX 12 (12_0) support and Vulkan 1.3 compatibility ensure that it can run modern APIs. The power requirements are a 150 W TDP with a single 6-pin power connector and a suggested 450 W power supply, which makes it a straightforward drop-in for most systems.

Settings Recommendations

Based on the measured FPS data, the optimal configuration for this combo is 1920x1080 with Medium settings. This yields 53 average FPS with a minimum of 45 and maximum of 60, providing a smooth experience for an action RPG where combat timing matters. The Medium preset delivers 8 FPS more than High settings at the same resolution, while the visual difference between Medium and High is typically less pronounced in games from this era.

For players who prioritize frame rate above all else, 1080p Low settings at 68 average FPS is the only configuration that approaches high-refresh-rate territory. This setting would be appropriate for players who want the smoothest possible gameplay and are willing to sacrifice visual fidelity. The jump from Low to Medium costs 15 FPS, which is a significant trade-off, but the Medium preset's 53 average FPS is still comfortably playable.

At 1440p, the data does not support any settings above Low. The Low preset at 1440p delivers 45 average FPS, which matches the 1080p High experience. Medium at 1440p drops to 34 average FPS, which is borderline for action gameplay, and High and Ultra fall to 29 and 23 average FPS respectively. Players with 1440p displays should strongly consider running at 1080p with Medium settings instead, as the resolution drop will likely have less impact on visual quality than the settings reduction.

Ultra settings are not recommended at any resolution with this hardware. Even at 1080p, Ultra delivers only 35 average FPS, which is below the 40 FPS threshold that many players consider the minimum for enjoyable action gameplay. The 18 FPS difference between Medium and Ultra at 1080p represents a 34% performance penalty that is unlikely to be justified by the visual improvements. At 4K, all settings produce sub-25 average FPS, making this resolution effectively unplayable for The Technomancer with the RX 570.

The 4K data suggests that players with 4K displays should either run the game at a lower resolution or accept that the experience will be severely compromised. The best 4K result is 25 average FPS at Low settings, which is below the playability threshold. The GPU's 4 GB memory capacity and 224.0 GB/s bandwidth are simply insufficient for the demands of The Technomancer at 4K, regardless of settings adjustments.