Archeage

# Archeage with AMD Ryzen 5 5600F + AMD Radeon RX 570

This combination of an AMD Ryzen 5 5600F processor and an AMD Radeon RX 570 graphics card ranks near the bottom of the tested pool for Archeage, sitting at position 2,647 out of 2,761 total combos. That places this pairing in the bottom 5% of all tested systems, a sobering result for a game that launched in 2014 and remains popular in the MMORPG space. The data reveals a system that can handle the game at lower presets but struggles significantly as resolution and quality demands increase, with the GPU appearing as the primary constraint in most scenarios.

How This Combo Ranks

The combo rank of 2,647 out of 2,761 tested configurations places this system in the 4th percentile overall, meaning roughly 96% of tested combinations deliver better performance in Archeage. This is a low ranking, but context matters: the Ryzen 5 5600F is a capable modern processor, while the RX 570 is an older graphics card from the Polaris generation. The data indicates that this pairing is heavily GPU-limited in this MMORPG.

Looking at the CPU's standalone position, the Ryzen 5 5600F sits at the 85th percentile against all CPUs, with an average benchmark score of 36,945. Its nearest rivals include the Intel Core Ultra 5 225 at 36,938 (0% delta), the AMD Ryzen 5 5500X3D at 37,018 (-0.2% delta), and the AMD Ryzen AI 7 PRO 450 at 37,093 (-0.4% delta). The processor is essentially neck-and-neck with these alternatives, showing that CPU performance is not the weak link here.

The GPU, however, tells a different story. The RX 570 ranks at the 74th percentile against all GPUs, with an average benchmark score of 28,766. Its nearest rivals include the AMD Radeon RX 6800M at 28,874 (-0.4% delta), the AMD Radeon R9 M295X at 28,580 (0.7% delta), and the AMD Radeon RX 470 at 28,996 (-0.8% delta). While the GPU is not at the very bottom of the hardware spectrum, its age and 4 GB VRAM capacity become apparent in this game's demanding scenarios.

The discrepancy between the CPU's strong standing and the GPU's middling position explains the low combo rank. The data suggests that pairing this processor with a stronger graphics card would yield substantially better results, as the CPU has headroom to spare in most Archeage scenarios.

GPU Role

The AMD Radeon RX 570 features 4 GB of GDDR5 memory on a 256-bit bus, delivering 224.0 GB/s of memory bandwidth. Its base clock runs at 1168 MHz with a boost clock of 1244 MHz, and the memory operates at 1750 MHz (7 Gbps effective). The card has 2,048 shading units, 128 texture mapping units, and 32 raster operations pipelines, with a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s. Floating point performance is rated at 5.095 TFLOPS for both FP32 and FP16.

In Archeage, the GPU's role is decisive across most measured configurations. At 1920x1080 with Low settings, the system achieves 62 FPS average, which is playable. However, this drops to 55 FPS at Medium, 37 FPS at High, and just 26 FPS at Ultra. The pattern shows that each quality tier costs roughly 15-20 FPS at 1080p, indicating that the GPU's shading and memory resources are stretched thin as texture quality and effects increase.

The 4 GB VRAM capacity is likely a limiting factor at higher settings and resolutions. At 2560x1440, the performance drops to 42 FPS at Low, 37 FPS at Medium, 25 FPS at High, and 17 FPS at Ultra. The gap between Low and Ultra at 1440p is 25 FPS, showing that the GPU cannot sustain high-quality rendering at this resolution. At 3840x2160, the situation becomes dire: 24 FPS at Low, 21 FPS at Medium, 14 FPS at High, and 10 FPS at Ultra.

The memory bandwidth of 224.0 GB/s, while respectable for its era, appears insufficient for Archeage's large open-world environments at higher resolutions. The measured FPS at 4K Ultra (10 FPS) suggests that VRAM capacity and bandwidth are both bottlenecks, as the card struggles to maintain even basic frame rates.

FAQ

Q: Can this system run Archeage at 1080p with playable frame rates?

A: Yes, at 1920x1080 with Low settings the system achieves 62 FPS average, and at Medium settings it reaches 55 FPS with a minimum of 47 FPS. Both are playable, though High settings drop to 37 FPS and Ultra falls to 26 FPS.

Q: How does the system perform at 1440p resolution?

A: At 2560x1440, the system delivers 42 FPS at Low settings, 37 FPS at Medium, 25 FPS at High, and 17 FPS at Ultra. Only Low and Medium settings approach playable frame rates at this resolution.

Q: Is 4K gaming viable with this combination?

A: No, 4K performance is severely limited. At 3840x2160, the system achieves 24 FPS at Low, 21 FPS at Medium, 14 FPS at High, and 10 FPS at Ultra. None of these are playable for a smooth experience.

Q: What is the best settings preset for a balanced experience?

A: At 1080p, Medium settings offer 55 FPS average with a minimum of 47 FPS, providing a good balance between visual quality and performance. At 1440p, Low settings at 42 FPS is the only option that stays above 40 FPS.

Q: How does the RX 570 compare to its nearest GPU rivals?

A: The RX 570's average benchmark score is 28,766, which is slightly below the AMD Radeon RX 6800M (28,874, -0.4% delta) and AMD Radeon RX 470 (28,996, -0.8% delta), but above the AMD Radeon R9 M295X (28,580, 0.7% delta) and NVIDIA Quadro RTX 8000 (28,421, 1.2% delta).

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the clear bottleneck. The Ryzen 5 5600F ranks at the 85th percentile among all CPUs, while the RX 570 ranks at the 74th percentile among GPUs. The FPS drops from 1080p to 4K are consistent with GPU limitations.

Measured FPS Breakdown

At 1920x1080, the system produces its best results. Low settings yield 62 FPS average, Medium delivers 55 FPS with a minimum of 47 and maximum of 63, High reaches 37 FPS, and Ultra drops to 26 FPS. The Medium preset's minimum FPS of 47 indicates reasonable frame pacing, though the gap between Medium and High is steep at 18 FPS.

Moving to 2560x1440, the performance drops significantly. Low settings achieve 42 FPS, Medium hits 37 FPS with a minimum of 32 and maximum of 43, High falls to 25 FPS, and Ultra bottoms out at 17 FPS. The Medium preset's minimum FPS of 32 is borderline for smooth gameplay, and the Low setting at 42 FPS is the only clearly playable option at this resolution.

At 3840x2160, the results are largely unplayable. Low settings produce 24 FPS, Medium reaches 21 FPS with a minimum of 18 and maximum of 24, High drops to 14 FPS, and Ultra falls to 10 FPS. Even the minimum FPS of 18 at Medium is below the threshold for acceptable gameplay, and the maximum of 24 FPS at Medium is still choppy.

The measured data shows a consistent pattern: each resolution step from 1080p to 1440p to 4K costs roughly 40-50% of the previous frame rate at equivalent settings. For example, Low settings drop from 62 FPS at 1080p to 42 FPS at 1440p (a 32% reduction), then to 24 FPS at 4K (a 43% reduction from 1440p). This scaling pattern is typical of a GPU-bound scenario.

Resolution Scaling

The FPS drop from 1080p to 4K reveals important information about the limiting component. At Low settings, the system goes from 62 FPS at 1080p to 42 FPS at 1440p to 24 FPS at 4K. The transition from 1080p to 1440p represents a 32% performance loss, while 1440p to 4K costs another 43%. This non-linear scaling is characteristic of a GPU that is running out of memory bandwidth and shading capacity as pixel count increases.

At Medium settings, the pattern is similar: 55 FPS at 1080p, 37 FPS at 1440p (33% drop), and 21 FPS at 4K (43% drop from 1440p). The High settings show 37 FPS at 1080p, 25 FPS at 1440p (32% drop), and 14 FPS at 4K (44% drop). Ultra settings follow the same trend: 26 FPS at 1080p, 17 FPS at 1440p (35% drop), and 10 FPS at 4K (41% drop).

The consistent 32-35% loss from 1080p to 1440p and 41-44% loss from 1440p to 4K across all settings suggests that the GPU's pixel throughput and memory bandwidth are the primary constraints. The RX 570's 224.0 GB/s bandwidth and 5.095 TFLOPS FP32 performance are simply insufficient for higher resolutions in Archeage's open-world rendering.

The CPU's role in this scaling is minimal. With a strong single-thread score of 2,872 from Passmark and a multithread score of 19,236, the Ryzen 5 5600F can keep up with the GPU's output at lower resolutions. The fact that FPS scales predictably with resolution indicates that the GPU is the bottleneck, not the processor.

Settings Recommendations

For 1080p gaming, the Medium preset is the clear recommendation. It delivers 55 FPS average with a minimum of 47 FPS, which is smooth enough for MMORPG gameplay. The step up to High costs 18 FPS (down to 37 FPS), which is a significant visual-to-performance trade-off that most players would not find worthwhile. Ultra at 26 FPS is not recommended for anything beyond screenshots.

At 1440p, players should stick with Low settings to achieve 42 FPS. The Medium preset at 37 FPS with a minimum of 32 FPS is borderline, and the drop to High at 25 FPS makes that preset impractical. The data suggests that 1440p is the edge of this GPU's capability in Archeage, and even Low settings may not provide a consistently smooth experience in crowded areas.

For 4K, no settings preset is truly playable. Low at 24 FPS is the best option, but it falls below the 30 FPS threshold that most players consider the minimum for acceptable gameplay. Players with 4K displays should consider lowering the resolution to 1440p or 1080p to get playable frame rates.

The best overall experience per the measured data is 1080p at Medium settings, which offers a 55 FPS average and 47 FPS minimum. This provides a comfortable margin above playability while maintaining reasonable visual quality. Players who prioritize smoothness over visuals can opt for 1080p Low at 62 FPS, while those who want better graphics can try 1080p High at 37 FPS if they can tolerate occasional frame drops.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor from the 5000 series, built on Zen 3 architecture with a 7 nm process node. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 32 MB of shared L3 cache. The CPU supports DDR4 memory with dual-channel configuration and 51.2 GB/s memory bandwidth, and it connects via PCIe Gen 4 with 20 lanes.

In Archeage, the CPU's role is supportive rather than dominant. The processor's Passmark benchmarks show strong performance: 2,872 for single-thread, 19,236 for multithread, 59,339 for integer math, and 34,548 for floating-point math. These scores place the CPU at the 85th percentile against all CPUs, indicating that it has ample processing power for this game.

The 6-core, 12-thread configuration is well-suited for MMORPGs, which typically have multiple background threads for network handling, asset streaming, and UI updates. The 32 MB L3 cache helps with the large world data that Archeage loads, and the 4.00 GHz boost clock ensures responsive single-threaded performance for the main game loop.

The data shows that the CPU is not the limiting factor in any measured scenario. The FPS differences between settings presets and resolutions align with GPU workload changes, not CPU limitations. Even at 1080p Low with 62 FPS, the CPU is likely not maxed out, as the GPU is still capable of higher output if the settings were lower.

The Ryzen 5 5600F's nearest rivals include the Intel Core Ultra 5 225 (36,938 avg score, 0% delta), AMD Ryzen 5 5500X3D (37,018, -0.2% delta), AMD Ryzen AI 7 PRO 450 (37,093, -0.4% delta), and Intel Core i9-12900T (37,112, -0.5% delta). These close scores indicate that the CPU is competitive with modern alternatives, and upgrading the GPU would be the more effective path to better Archeage performance.

The processor's 65 W TDP and 7 nm process node make it efficient, and its DDR4 support means it can be paired with affordable memory. However, the measured FPS results suggest that no amount of CPU headroom can compensate for the GPU's limitations in this game. Players looking to improve Archeage performance with this CPU should focus on GPU upgrades rather than CPU upgrades.