Roblox

The Intel Core i5-10400F paired with the Intel Arc B580 sits at rank 1410 out of 1800 tested combos in Roblox. This places the pairing in the lower-middle portion of the database, meaning that while it is far from the fastest configuration available for this title, it also outranks roughly one-fifth of all tested systems. The data indicates that this is a competent setup for Roblox, but not one that will dominate leaderboards. The combination’s percentile positioning is consistent with what you would expect from a mid-range CPU from 2020 paired with a current-generation entry-level GPU; it clears the playable threshold with ease but leaves headroom above it for higher-tier hardware.

How This Combo Ranks

At rank 1410 of 1800, this combo sits in the 22nd percentile of all tested pairings for Roblox. That means 390 other combinations deliver higher average frame rates, while 1410 are slower. The ranking is heavily influenced by the CPU’s standing among all processors; the i5-10400F holds the 73rd percentile among all CPUs, which is a solid mid-pack result. However, the GPU’s 66th percentile among all GPUs is slightly lower, suggesting the graphics card is the more limiting factor in this pairing. The delta between the two components’ relative standings is small, but the data shows that the CPU is marginally stronger relative to its peers than the GPU is to its own competition. In practical terms, this combo ranks where it does because neither component excels enough to pull the pairing significantly upward, but both are capable enough to avoid dragging it down.

GPU Role

The Intel Arc B580 brings 12 GB of GDDR6 memory on a 192-bit bus, yielding 456.0 GB/s of bandwidth. That memory configuration is generous for a game like Roblox, which does not typically demand high VRAM capacity at the resolutions tested. The GPU’s clocks are static at 2670 MHz for both base and boost, which simplifies performance prediction—there is no boost variance to account for. The card’s 2560 shading units and 80 ROPs handle the rasterization workload, and the 13.67 TFLOPS of FP32 compute is ample for this title. In the measured results, the GPU shows a clear scaling pattern: at 1080p Low, the combo hits 294.1 FPS, but at 4K Ultra it drops to 71.5 FPS. The Arc B580’s 66th percentile GPU ranking, with an average benchmark score of 23021, places it near the NVIDIA GeForce RTX 4060, which scores 23181—a delta of -0.7%. This means the B580 is effectively a peer to that card in raw compute, though Roblox’s engine may favor one architecture over the other.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals where the bottleneck shifts. At 1080p High, the combo produces 238.5 FPS; at 1440p High, it drops to 156 FPS; at 4K High, it falls to 87.6 FPS. That is a 37% drop from 1080p to 1440p, and a 63% drop from 1080p to 4K. The scaling suggests that at 1080p, the CPU is doing more of the work, because the frame rates are high enough that the GPU is not saturated. As resolution increases, the GPU becomes the limiting component—the 4K High result of 87.6 FPS is only 22% lower than the 4K Low result of 114.1 FPS, showing that even at Low settings, the GPU cannot fully overcome the resolution’s pixel count. The Ultra preset at 4K drops to 71.5 FPS, which is still playable but indicates that the Arc B580 is nearing its limits at that resolution. For a game like Roblox, the data suggests that 1440p is the sweet spot where the combo’s components are balanced; 4K is playable but requires accepting lower settings.

Settings Recommendations

The measured rows show a consistent pattern across all resolutions: Low is the fastest, followed by Medium, then High, then Ultra. At 1080p, the spread is 294.1 FPS on Low versus 195.1 FPS on Ultra—a 99 FPS difference. At 1440p, the spread narrows to 73.1 FPS, and at 4K, it narrows to 42.6 FPS. The Ultra preset at 1080p still delivers 195.1 FPS, which is well above any reasonable refresh rate target. The data indicates that High settings at 1080p provide 238.5 FPS, which is a 22% reduction from Low but with better visual quality. For 1440p, High yields 156 FPS, which is smooth for most displays. At 4K, High drops to 87.6 FPS, which is acceptable for slower-paced gameplay, but Medium at 100 FPS offers a better balance. The recommendation from the data is: at 1080p, use Ultra for maximum fidelity without sacrificing playability; at 1440p, use High; at 4K, use Medium to stay above 100 FPS.

FAQ

Q: Can this combo run Roblox at 4K with playable frame rates?

A: Yes. The measured data shows 87.6 FPS on High and 114.1 FPS on Low at 3840x2160, both of which are above the 60 FPS threshold. Ultra drops to 71.5 FPS, which is still playable but less comfortable.

Q: Is the Intel Core i5-10400F a bottleneck for the Arc B580 in Roblox?

A: At 1080p, the CPU appears to be more involved, as frame rates exceed 238 FPS on High. At 4K, the GPU becomes the limiting factor, as frame rates drop more steeply with resolution increases. The data suggests the bottleneck shifts from CPU to GPU as resolution rises.

Q: How does the Arc B580 compare to the RTX 4060 in this context?

A: The Arc B580’s average benchmark score is 23021, while the RTX 4060 scores 23181, a delta of -0.7%. This indicates near-identical raw performance, though Roblox’s specific engine behavior could favor either card.

Q: What is the best settings preset for a 1440p monitor?

A: High settings at 2560x1440 yield 156 FPS, which is the best balance of visual quality and frame rate. Ultra drops to 126 FPS, which is still smooth, but High offers more headroom.

Q: Does the 12 GB VRAM on the Arc B580 matter for Roblox?

A: Roblox is not a VRAM-intensive game, and the 12 GB GDDR6 buffer with 456.0 GB/s bandwidth is more than sufficient. The measured results show no indication that VRAM capacity limits performance at any tested resolution.

Q: How does this combo rank among all tested systems for Roblox?

A: It ranks 1410 out of 1800, placing it in the lower-middle tier. This is consistent with the CPU’s 73rd percentile and the GPU’s 66th percentile standings.

CPU Role

The Intel Core i5-10400F provides 6 cores and 12 threads with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. Its 12 MB of shared L3 cache and dual-channel DDR4 memory support are typical for a 10th Gen Core i5. In Roblox, the CPU’s single-thread performance is critical, and the data shows a 3dmark single-thread score of 688 and a Passmark single-thread score of 2541. The CPU’s percentile rank of 73 among all CPUs, with an average benchmark score of 14168, places it just above the AMD EPYC 7552, which scores 14115—a delta of 0.4%. It is also within 1.2% of the AMD Ryzen Embedded V2546, which scores 14336. The multi-threaded results, such as Cinebench R23 multicore at 10297, show that the CPU can handle more than just light loads. In Roblox, the CPU’s role is evident in the 1080p results: at 1080p Low, the combo hits 294.1 FPS, which is likely near the CPU’s practical limit for this engine. The boost clock of 4.30 GHz helps keep frame rates high in scenes with many objects or players, as the single-thread performance is what Roblox’s physics and scripting systems rely on. The CPU’s 65 W TDP is modest, and the socket 1200 platform means it pairs with widely available DDR4 memory, which keeps the overall system cost reasonable without sacrificing Roblox performance.