Roblox

Resolution Scaling

The measured FPS data for Roblox with the Intel Core i5-10400F and NVIDIA GeForce RTX 5060 shows a clear pattern of performance scaling across resolutions. At 1080p with Low settings, the combo produces 386.4 FPS, which drops to 257.7 FPS at 1440p and further down to 145.4 FPS at 4K. This represents a 62.4% reduction in frame rate from 1080p to 4K at Low settings. The scaling is steeper at Ultra settings, where the 1080p result of 248.5 FPS falls to 170.2 FPS at 1440p and 97.2 FPS at 4K — a 60.9% total drop.

The pattern across all settings suggests that the RTX 5060's 8 GB of GDDR7 memory and 448.0 GB/s bandwidth are becoming the limiting factor at higher resolutions. The gap between Low and Medium settings at 1080p is relatively small — 386.4 FPS versus 350 FPS — indicating that the CPU can still feed the GPU adequately at this resolution. However, at 4K, the spread between Low (145.4 FPS) and Medium (132.3 FPS) narrows further, while the jump to Ultra (97.2 FPS) is more pronounced. This behavior points to the GPU's rasterization throughput — 19.18 TFLOPS FP32 and 119.9 GPixel/s pixel rate — being the primary constraint once resolution increases.

The diminishing returns from 1080p to 1440p versus 1440p to 4K are noteworthy. At High settings, moving from 1080p (309.6 FPS) to 1440p (205.7 FPS) costs 103.9 FPS, while moving from 1440p to 4K (117.1 FPS) costs 88.6 FPS. The absolute drops are similar, but the percentage loss is greater at the higher resolution step. This indicates that while the GPU is increasingly stressed at 4K, the CPU is still providing enough headroom — the 6-core, 12-thread Comet Lake processor with a 4.30 GHz boost clock is not the bottleneck in this title.

GPU Role

The RTX 5060's memory subsystem plays a critical role in Roblox's performance profile. The card features 8 GB of GDDR7 memory on a 128-bit bus, delivering 448.0 GB/s of bandwidth. The memory clock runs at 1750 MHz, which translates to 28 Gbps effective. These specifications are modest by modern high-end standards, but the benchmark results show they are sufficient for Roblox at most settings. The 1440p results — 257.7 FPS at Low, 235.4 FPS at Medium, 205.7 FPS at High, and 170.2 FPS at Ultra — demonstrate that the memory bandwidth is not a hard ceiling until 4K Ultra is attempted.

The GPU's clock behavior is also relevant. With a base clock of 2280 MHz and a boost clock of 2497 MHz, the RTX 5060 maintains high sustained clocks during Roblox sessions. The 5 nm Blackwell 2.0 architecture, built by TSMC, includes 3,840 shading units, 120 TMUs, and 48 ROPs. The texture rate of 299.6 GTexel/s and the pixel rate of 119.9 GPixel/s are the key throughput metrics for a game like Roblox, which relies heavily on simple geometry and texture fill rather than complex shading.

The GPU's 30 RT cores and 120 tensor cores are present, but Roblox's rendering workload does not appear to leverage ray tracing or DLSS features heavily. The measured results show a linear progression from Low to Ultra at each resolution, which suggests the game is primarily bound by raw fill rate and memory bandwidth rather than compute features. The PassMark G3D score of 20,891 and the Geekbench OpenCL score of 120,785 provide synthetic confirmation of the card's capability, though the real-world Roblox results are more telling.

The 145 W TDP and 300 W suggested PSU rating indicate the card runs efficiently, but these figures do not directly translate to gaming performance. What matters is that the GPU maintains its boost clock under load, which the FPS numbers imply it does, given the high frame rates even at 4K Low (145.4 FPS).

How This Combo Ranks

The combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 5060 ranks 906th out of 1,800 tested combos in Roblox. This places the pair in the 50.3rd percentile of all combinations tested for this game. The rank is somewhat surprising given the strong raw FPS numbers, but it reflects the fact that Roblox is a lightweight title where many mid-range and even older GPUs can achieve high frame rates.

The CPU, with an average benchmark score of 14,168, sits in the 73rd percentile of all CPUs. Its nearest rivals include the AMD EPYC 7552 (14,115, just 0.4% lower), the AMD Ryzen 3 7320C (14,277, 0.8% higher), and the Intel Core i5-8500 (14,332, 1.1% higher). These deltas are minimal, meaning the i5-10400F is competitive with a broad range of processors in synthetic tests, but its single-thread performance — a 3DMark single-thread score of 688 and a PassMark single-thread score of 2,541 — matters more for Roblox.

The GPU's average benchmark score of 30,109 places it in the 73rd percentile of all GPUs. Its nearest rivals are the AMD Radeon RX 7700 XT (30,097, 0% delta), the AMD Radeon RX 570 (30,158, -0.2%), and the NVIDIA Tesla M60 (29,969, 0.5%). The RTX 5060 essentially ties the RX 7700 XT in aggregate score, yet the RX 570's presence in the rival list — a much older card — highlights how benchmark averages can obscure generational differences. For Roblox specifically, the measured FPS data matters more than synthetic scores.

The 906th rank out of 1,800 combos suggests that while this pairing is capable, other CPU-GPU combinations deliver higher frame rates in Roblox. The gap is likely due to the CPU's 6-core/12-thread configuration and its 2.90 GHz base clock, which, while boosted to 4.30 GHz, may not match the per-core performance of newer architectures in a game that often favors single-thread performance.

Settings Recommendations

Based on the measured FPS rows, the optimal settings for this combo depend heavily on the target resolution. At 1080p, all presets deliver well above 240 FPS, with Low at 386.4 FPS, Medium at 350 FPS, High at 309.6 FPS, and Ultra at 248.5 FPS. The data indicates that Ultra at 1080p is entirely playable, offering 248.5 FPS while presumably delivering the best visual fidelity. The drop from High to Ultra is 61.1 FPS, which is noticeable but not prohibitive.

At 1440p, the choices become more nuanced. Low delivers 257.7 FPS, Medium 235.4 FPS, High 205.7 FPS, and Ultra 170.2 FPS. All of these exceed 165 Hz, so any preset is viable for high-refresh-rate monitors. However, the gap between Medium and High is only 29.7 FPS, while the gap between High and Ultra is 35.5 FPS. For users prioritizing smoothness, Medium or High are the sweet spots; for those wanting maximum visual quality, Ultra still maintains a 170.2 FPS average.

At 4K, the recommendation shifts. Low yields 145.4 FPS, Medium 132.3 FPS, High 117.1 FPS, and Ultra 97.2 FPS. The step from High to Ultra costs 19.9 FPS, which is the largest relative drop at this resolution. For a 60 Hz display, even Ultra is sufficient, but for 120 Hz or higher, Low or Medium are the safer choices. The data does not show a scenario where the game becomes unplayable, but the margin for error narrows significantly at 4K Ultra.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are: 386.4 at Low, 350 at Medium, 309.6 at High, and 248.5 at Ultra. The progression shows a 36.4 FPS drop from Low to Medium, a 40.4 FPS drop from Medium to High, and a 61.1 FPS drop from High to Ultra. The increasing performance cost per preset tier suggests that Ultra introduces effects that are disproportionately expensive relative to their visual benefit.

At 2560x1440, the results are: 257.7 at Low, 235.4 at Medium, 205.7 at High, and 170.2 at Ultra. The deltas are 22.3 FPS (Low to Medium), 29.7 FPS (Medium to High), and 35.5 FPS (High to Ultra). The absolute values are lower than 1080p, but the relative pattern is similar — Ultra is the most costly step.

At 3840x2160, the results are: 145.4 at Low, 132.3 at Medium, 117.1 at High, and 97.2 at Ultra. The deltas are 13.1 FPS (Low to Medium), 15.2 FPS (Medium to High), and 19.9 FPS (High to Ultra). The total spread from Low to Ultra is 48.2 FPS, which is the narrowest range across all resolutions. This compression indicates that at 4K, the GPU is the limiting factor regardless of settings, and the CPU's contribution diminishes.

Comparing across resolutions at the same setting, the 1080p to 1440p drop at Low is 128.7 FPS, while the 1440p to 4K drop is 112.3 FPS. At Ultra, the drops are 78.3 FPS and 73 FPS, respectively. The consistency of these drops supports the conclusion that the GPU's memory bandwidth and pixel rate are the primary constraints at higher resolutions.

FAQ

Q: What is the highest average FPS this combo achieves in Roblox?

A: The highest measured average FPS is 386.4, achieved at 1920x1080 with Low settings. The lowest measured average is 97.2 FPS at 3840x2160 with Ultra settings.

Q: Is the RTX 5060's 8 GB VRAM sufficient for Roblox at 4K?

A: Yes, the measured data shows playable frame rates at 4K across all settings, with Low at 145.4 FPS and Ultra at 97.2 FPS. The 448.0 GB/s memory bandwidth appears adequate for this title.

Q: How does the i5-10400F compare to its nearest rivals in synthetic benchmarks?

A: The i5-10400F scores 14,168 on average, which is 0.4% higher than the AMD EPYC 7552 (14,115) and 0.8% lower than the AMD Ryzen 3 7320C (14,277). It trails the Intel Core i5-8500 (14,332) by 1.1%.

Q: What settings should I use for a 144 Hz monitor at 1440p?

A: All presets exceed 144 Hz at 1440p. Low delivers 257.7 FPS, Medium 235.4 FPS, High 205.7 FPS, and Ultra 170.2 FPS, so any setting comfortably clears the 144 Hz threshold.

Q: Does the combo rank well among all tested combinations?

A: The combo ranks 906th out of 1,800 tested combinations in Roblox, placing it in the middle of the field despite the high absolute FPS numbers.

Q: How much FPS is lost moving from 1080p to 4K at Ultra settings?

A: At Ultra settings, the 1080p result is 248.5 FPS and the 4K result is 97.2 FPS, a total loss of 151.3 FPS or approximately 60.9% of the original frame rate.