Pc Building Simulator

The Intel Core i7-12700K paired with the NVIDIA GeForce RTX 5070 delivers a performance profile in Pc Building Simulator that is heavily dictated by graphical settings and resolution, with the data revealing a clear hierarchy of frame rates across the measured spectrum. At 1080p, the combination produces an average of 398.7 FPS on Low settings, which drops to 189 FPS on Ultra, indicating a substantial 52.6% reduction in raw throughput from the lowest to the highest fidelity preset. This pattern persists at 1440p, where the average frame rate scales from 249.7 FPS on Low down to 118.3 FPS on Ultra, and at 4K, the spread narrows to a range between 130.6 FPS on Low and 59.6 FPS on Ultra. The data suggests that the RTX 5070, with its 12 GB of GDDR7 memory on a 192-bit bus and 672.0 GB/s of bandwidth, is capable of sustaining high refresh rates at lower resolutions, but the demands of Ultra settings at 4K push the average below the 60 FPS threshold.

Resolution Scaling

The measured FPS data shows a predictable yet pronounced scaling curve as resolution increases from 1920x1080 to 3840x2160. At High settings, the frame rate drops from 195.5 FPS at 1080p to 123.7 FPS at 1440p, a 36.7% reduction, and then further down to 64.9 FPS at 4K, representing a 47.5% reduction from the 1440p figure. This indicates that the rendering load is scaling heavily with pixel count, which is typical for a simulation title that relies on CPU-driven logic for the building mechanics but GPU-bound rasterization for the visual output.

The scaling behavior at Ultra settings is similar but with lower absolute numbers: 189 FPS at 1080p, 118.3 FPS at 1440p (a 37.4% drop), and 59.6 FPS at 4K (a 49.6% drop from 1440p). The fact that the percentage drops between 1080p and 1440p are nearly identical across High and Ultra presets suggests that the GPU is the primary limiting factor in both cases, with the added visual effects of Ultra not disproportionately increasing the resolution penalty. However, the gap between 1440p and 4K widens slightly, indicating that at 4K, the RTX 5070's 192-bit memory bus and 12 GB VRAM capacity are being taxed more severely.

Looking at the Low preset, the scaling is more dramatic: 398.7 FPS at 1080p, 249.7 FPS at 1440p (a 37.4% drop), and 130.6 FPS at 4K (a 47.7% drop from 1440p). The near-identical percentage drops between Low and High presets across the same resolution transitions imply that the limiting component remains consistent regardless of settings. The data suggests that at 1080p Low, the system is likely approaching a CPU-bound scenario, given the 398.7 FPS figure, but the 12-core i7-12700K with 20 threads and a boost clock of 5.00 GHz appears to be keeping pace, as the scaling to 1440p still follows the GPU-bound pattern.

The 4K results are telling: the difference between Low (130.6 FPS) and High (64.9 FPS) is a 50.3% reduction, while the difference between High and Ultra (59.6 FPS) is just an 8.2% reduction. This indicates that while the GPU is the dominant bottleneck at 4K, the incremental cost of moving from High to Ultra is relatively small in frame rate terms, suggesting that the Ultra preset may be adding effects that are not heavily pixel-bound. Overall, the resolution scaling analysis points to a system that is GPU-limited at all tested resolutions, with the CPU providing sufficient headroom to avoid becoming the constraining factor.

GPU Role

The NVIDIA GeForce RTX 5070, built on the Blackwell 2.0 architecture with a 5 nm process from TSMC, is the clear driver of the frame rates observed in this data. Its base clock of 2325 MHz and boost clock of 2512 MHz, combined with 6144 shading units, provide the computational throughput necessary for the high averages seen at 1080p. The 12 GB of GDDR7 memory operating at 28 Gbps effective and delivering 672.0 GB/s of bandwidth is a critical factor at 4K, where the Ultra preset still manages 59.6 FPS, indicating that the memory subsystem is not being overwhelmed despite the higher resolution demands.

The GPU's role is further illuminated by its benchmark scores, which place it in the 83rd percentile of all GPUs tested. Its average benchmark score of 41687 is 0.6% higher than the NVIDIA GeForce RTX 3090, which has an average score of 41441, and 0.2% higher than the AMD Radeon Pro 5300 at 41610. This proximity to previous-generation high-end parts underscores that the RTX 5070 is a capable performer for this simulation title. The PassMark G3D score of 29137 and the 3DMark Steel Nomad DX12 score of 5077 further corroborate its strong rasterization performance, which aligns with the measured FPS data showing smooth operation across most settings.

The GPU's memory configuration is notable in the context of Pc Building Simulator, a game that involves rendering detailed PC components and workshop environments. The 192-bit bus width and 12 GB capacity are adequate for the textures and geometry at 1440p and even 4K, as evidenced by the 118.3 FPS average at 1440p Ultra. However, the data shows that at 4K Ultra, the frame rate drops below 60 FPS, suggesting that the GPU's raw compute power, rather than memory capacity, is the limiting factor. The 30.87 TFLOPS of FP32 performance is substantial, but the pixel rate of 201.0 GPixel/s and texture rate of 482.3 GTexel/s appear to be the bottlenecks at 4K.

The RTX 5070's role as the primary renderer is also reflected in its power characteristics, with a TDP of 250 W and a suggested PSU of 600 W, though these are not directly related to the measured FPS. The data indicates that the GPU is well-matched to the i7-12700K, as the CPU's own benchmark scores, including a Cinebench R23 multicore score of 29241 and a PassMark multithread score of 34404, suggest it can feed the GPU adequately without becoming a bottleneck.

Settings Recommendations

Based on the measured average FPS across the four presets at each resolution, the data supports specific recommendations for the best experience. At 1080p, the High preset delivers 195.5 FPS, which is well above the threshold for high-refresh-rate displays, while the Ultra preset provides 189 FPS, a marginal 3.4% reduction for potentially improved visual fidelity. Given the small difference, Ultra at 1080p is the recommended choice for users with 144Hz or 165Hz monitors, as it maintains a high refresh rate while maximizing visual quality.

At 1440p, the High preset achieves 123.7 FPS, which is suitable for 120Hz panels, while the Ultra preset drops to 118.3 FPS, a 4.4% reduction. The data suggests that High is the safer choice for consistent 120 FPS gameplay, but Ultra remains viable for users willing to accept a slightly lower average. For those with 60Hz displays at 1440p, the Medium preset at 179.8 FPS is excessive, and High or Ultra are both excellent options, with Ultra providing the best visual experience at 118.3 FPS.

At 4K, the High preset is the only viable option for smooth gameplay, with an average of 64.9 FPS, which is just above the 60 FPS target. The Ultra preset at 59.6 FPS falls below this threshold, making it less desirable for a consistent experience, while the Medium preset at 96 FPS offers headroom but may not justify the visual downgrade. The Low preset at 4K at 130.6 FPS is unnecessary unless the user prioritizes maximum frame rate over all visual fidelity.

The data indicates that the Medium preset provides the best balance for most scenarios, with 284.2 FPS at 1080p, 179.8 FPS at 1440p, and 96 FPS at 4K. This preset offers a substantial performance buffer over High and Ultra, making it the most flexible for users with variable refresh rate monitors or those who value frame rate consistency. However, for users with high-refresh-rate 1080p or 1440p displays, the High preset is the sweet spot, as it delivers 195.5 FPS and 123.7 FPS respectively, which are sufficient for most gaming panels.

How This Combo Ranks

The combination of the Intel Core i7-12700K and the NVIDIA GeForce RTX 5070 ranks 313 out of 1769 tested combos in Pc Building Simulator, placing it in the top 17.7% of all configurations. This ranking is impressive given the CPU's percentile of 89 versus all CPUs, indicating that the i7-12700K is a strong performer in its own right, but the GPU's 83rd percentile ranking pulls the overall combo down slightly. The data shows that this pairing is well-balanced, with neither component acting as a significant weak link.

Comparing the CPU to its nearest rivals, the i7-12700K has an average benchmark score of 35684, which is 0.3% lower than the AMD Ryzen 7 PRO 5845 at 35802, and 0.6% higher than the Intel Core i7-13700T at 35468. This places the CPU in a tightly contested performance band where the differences are negligible in real-world terms. The GPU's nearest rivals show a similar pattern, with the RTX 5070's average score of 41687 being 0.6% higher than the RTX 3090, but 0.5% lower than the NVIDIA Tesla M40 at 41897.

The combo's rank of 313 out of 1769 suggests that while it is not at the absolute top tier, it is significantly ahead of the majority of tested systems. The measured FPS data supports this, as the combo achieves over 100 FPS at 1440p High and over 60 FPS at 4K High, which are strong results for a simulation game. The ranking also indicates that the i7-12700K's 12-core, 20-thread configuration and the RTX 5070's 12 GB VRAM are sufficient for this title's demands, though the 4K Ultra result of 59.6 FPS shows that it is not the definitive top performer.

The data suggests that this combo is optimized for high-refresh-rate gaming at 1080p and 1440p, with the 4K experience being playable but not exceptional. The rank of 313 out of 1769 places it ahead of systems with less capable CPUs or GPUs, but behind those with higher-end components like the RTX 5090 or more powerful CPUs. Overall, the combination is a solid mid-to-high-tier performer in Pc Building Simulator, delivering a smooth experience at mainstream resolutions.

FAQ

Q: What is the average FPS at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 123.7 FPS, which provides a smooth experience for 120Hz displays.

Q: Can this combo handle 4K gaming in Pc Building Simulator?

A: Yes, the combo achieves 64.9 FPS at 4K with High settings, which is above the 60 FPS target. However, at 4K with Ultra settings, the average drops to 59.6 FPS, which is slightly below that threshold.

Q: How does the RTX 5070 compare to the RTX 3090 in this game?

A: The RTX 5070 has an average benchmark score of 41687, which is 0.6% higher than the RTX 3090's average score of 41441. This indicates a slight performance advantage for the RTX 5070.

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS recorded is 398.7 FPS at 1920x1080 with Low settings.

Q: Is the CPU or GPU the bottleneck at 4K Ultra?

A: The data shows that the GPU is the primary limiting factor at 4K Ultra, as the frame rate drops to 59.6 FPS. The CPU's performance, with a PassMark multithread score of 34404, appears to be sufficient to avoid becoming the bottleneck.

Q: What is the combo's ranking among all tested configurations?

A: The combo ranks 313 out of 1769 tested combinations in Pc Building Simulator, placing it in the top 17.7% of all systems tested.