Pc Building Simulator

Pc Building Simulator’s measured performance with the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5070 reveals a system that scales predictably across resolutions, with the data indicating a strong balance between the two components for this simulation title. The combination ranks 983rd out of 3723 tested combos, placing it in the upper third of all tested configurations, and the benchmark results show that this pairing is capable of delivering high frame rates even at demanding settings.

Resolution Scaling

The FPS drop from 1080p to 4K is significant and tells a clear story about where the bottleneck lies in this system. At Low settings, the average frame rate falls from 267 FPS at 1920x1080 to 129 FPS at 3840x2160, a reduction of roughly 52%. This substantial decline indicates that as resolution increases, the workload shifts heavily onto the GPU, which is expected given the RTX 5070’s architecture.

Moving from 1440p to 4K shows the steepest relative drop across all settings. At Medium settings, the average FPS goes from 175 at 2560x1440 to 92 at 3840x2160, a 47% decrease. The pattern is consistent: the gap between 1080p and 1440p is relatively modest, but the jump to 4K imposes a much heavier penalty. For instance, at High settings, the difference between 1080p (196 FPS) and 1440p (124 FPS) is 72 FPS, while the drop from 1440p to 4K (65 FPS) is 59 FPS—a similar absolute loss, but the percentage drop is larger at higher resolutions.

This scaling behavior suggests that the RTX 5070 is the primary limiting factor at 4K, as the CPU has more headroom to feed frames at lower resolutions. The fact that 4K Ultra yields only 62 FPS average, compared to 187 FPS at 1080p Ultra, underscores how resolution-dependent this configuration is. The data implies that for smooth 4K gameplay, users would need to compromise on settings, while 1080p and 1440p are where this combo truly shines.

CPU Role

The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, running at a base clock of 3.70 GHz and a boost clock of 4.20 GHz. Its benchmark scores show a solid multi-threaded performer: a Cinebench R23 multi-core score of 13593 and a single-core score of 1919. In PassMark, the multi-thread score is 15992, while the single-thread score is 2653, placing the CPU in the 71st percentile of all CPUs.

In Pc Building Simulator, the CPU’s role appears to be secondary to the GPU at lower resolutions, but it still contributes to the high frame rates observed. At 1080p Low, the system achieves 267 FPS, which suggests the CPU can keep up with the GPU’s output without becoming a major constraint. However, the 3DMark scores reveal that the processor’s strength lies in multi-threaded workloads: the 16-thread score of 4863 is nearly identical to the max-thread score of 4889, indicating that the CPU scales well with additional threads.

The L3 cache is 8 MB shared, which is modest by modern standards, but for a simulation game like Pc Building Simulator, which likely relies on physics and logic calculations, the 12 threads provide adequate parallel processing capability. Compared to its nearest rivals, the Ryzen 5 4600G sits in a tight cluster: it is 0.1% ahead of the AMD Ryzen 3 PRO 5355GE and 0.6% ahead of the Intel Core 7 150U, but 0.6% behind the AMD Ryzen 3 8300GE and 0.8% behind the Intel Core i3-14100T. This suggests that the CPU’s performance is competitive but not exceptional, and in this game, it is likely the GPU that dictates the overall experience at higher resolutions.

Settings Recommendations

The measured FPS data provides clear guidance on which preset offers the best experience. At 4K, the Ultra preset delivers an average of 62 FPS, which is playable but may not feel smooth on high-refresh displays. Dropping to High improves this to 65 FPS, a marginal gain of only 3 FPS, suggesting that the jump from High to Ultra is not worth the performance hit at this resolution. Medium at 4K offers 92 FPS, a significant improvement of 27 FPS over High, making it the sweet spot for 4K gaming with this combo.

At 1440p, the situation is more comfortable. Ultra averages 118 FPS, which is already smooth for most monitors. High provides 124 FPS, and Medium pushes to 175 FPS. For users with 144Hz displays, High or Ultra is recommended, as both exceed the refresh rate threshold. The Low preset at 229 FPS is unnecessarily high and would only be useful for competitive play where frame rate trumps visual fidelity.

At 1080p, all settings are playable, with even Ultra hitting 187 FPS. Medium offers 235 FPS, and Low reaches 267 FPS. The data suggests that for the best visual quality without sacrificing smoothness, High at 1080p (196 FPS) is an excellent choice. The Medium preset at 1080p shows a minimum of 199 FPS and a maximum of 270 FPS, indicating stable frame times. Overall, the recommendation is to use High at 1080p or 1440p for a balanced experience, and Medium at 4K to maintain a high refresh rate.

FAQ

Q: What is the highest average FPS achievable with this combo?

A: The highest measured average FPS is 267, achieved at 1920x1080 with Low settings.

Q: How does the RTX 5070 perform at 4K Ultra compared to 1080p Ultra?

A: At 4K Ultra, the average FPS is 62, while at 1080p Ultra it is 187, a difference of 125 FPS.

Q: Is the Ryzen 5 4600G a bottleneck at 1080p?

A: The data implies it is not a major bottleneck at 1080p, as the system hits 267 FPS at Low settings, indicating the CPU can feed the GPU effectively.

Q: What is the minimum FPS recorded in the measurements?

A: The lowest minimum FPS is 78, recorded at 3840x2160 with Medium settings.

Q: How does this combo rank compared to other tested configurations?

A: It ranks 983rd out of 3723 combos, placing it in the top 26% of all tested systems.

Q: Which settings provide the most consistent frame pacing at 1440p?

A: At 1440p Medium, the minimum FPS is 149 and the maximum is 202, showing a narrow 53 FPS range, which indicates stable performance.

GPU Role

The NVIDIA GeForce RTX 5070 is a Blackwell 2.0 architecture GPU with 6144 shading units, 192 texture mapping units, and 80 raster output pipelines. It features 12 GB of GDDR7 memory on a 192-bit bus, delivering a bandwidth of 672.0 GB/s. The core clocks are 2325 MHz base and 2512 MHz boost, with memory running at 1750 MHz (28 Gbps effective). This GPU sits in the 82nd percentile of all GPUs, with an average benchmark score of 40377.

In Pc Building Simulator, the GPU’s role is clearly dominant at higher resolutions. The 4K results show a steep drop-off from Medium (92 FPS) to High (65 FPS) and Ultra (62 FPS), indicating that the GPU’s compute and memory bandwidth are heavily taxed by the higher pixel counts. The PassMark G3D score of 29137 supports this, showing strong raw graphics performance, but the game’s demands at 4K Ultra push the GPU to its limits.

The 12 GB of VRAM is likely sufficient for this game, as the data does not indicate any memory-related stutters or crashes. The GPU’s FP32 performance of 30.87 TFLOPS suggests it can handle complex shader workloads, which is evident in the high frame rates at 1080p and 1440p. Compared to its nearest rivals, the RTX 5070 is 0.1% ahead of the AMD Radeon Pro 580 and 0.8% ahead of the AMD Radeon Pro WX 7100, but 1.2% behind the AMD Radeon Pro 5300 and 2% behind the NVIDIA RTX A500 Mobile. These small deltas indicate that the RTX 5070 is a mid-pack performer in this specific benchmark context, but in Pc Building Simulator, it delivers playable frame rates across all tested settings.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings average 267 FPS, Medium averages 235 FPS with a minimum of 199 and maximum of 270, High averages 196 FPS, and Ultra averages 187 FPS. The spread between Low and Ultra is 80 FPS, showing that settings have a notable impact but even Ultra remains highly playable.

At 2560x1440, the frame rates remain strong but show a clearer separation between presets. Low averages 229 FPS, Medium averages 175 FPS (min 149, max 202), High averages 124 FPS, and Ultra averages 118 FPS. The drop from Low to Ultra is 111 FPS, indicating that the GPU is starting to feel the resolution increase.

At 3840x2160, the performance gap becomes more pronounced. Low averages 129 FPS, Medium averages 92 FPS (min 78, max 105), High averages 65 FPS, and Ultra averages 62 FPS. The difference between Low and Ultra is 67 FPS, but the more telling metric is the steep cliff between Medium and High, which represents a 27 FPS loss. This suggests that High settings introduce visual effects that are disproportionately expensive at 4K.

How This Combo Ranks

The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5070 combination ranks 983rd out of 3723 tested combos in Pc Building Simulator. This places the system in the 73rd percentile of all tested configurations, meaning it outperforms roughly 73% of the tested hardware pairings. Given the CPU’s 71st percentile ranking and the GPU’s 82nd percentile ranking, the combo’s overall position is slightly below the GPU’s individual standing, suggesting the CPU may be holding back the GPU in some scenarios.

The rank is particularly notable because the RTX 5070 is a high-end GPU, but the Ryzen 5 4600G is a mid-range processor. The data indicates that in Pc Building Simulator, the combination works well, but there is potential for improvement with a stronger CPU. The measured FPS results support this interpretation: at 1080p, the system achieves over 187 FPS at all settings, which is excellent, but at 4K, the frame rates drop to the 60-90 range, where the GPU is clearly the limiting factor. This suggests that the combo’s ranking is more reflective of the GPU’s capabilities than the CPU’s, and users looking to maximize performance in this game would benefit from a more powerful processor to complement the RTX 5070.