Pc Building Simulator
This combination delivers exceptional performance with an average of 165 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 70 | 73 | 101 | 141 |
| 1440p QHD | 132 | 137 | 191 | 229 |
| 1080p Full HD | 202 | 204 | 234 | 267 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
Pc Building Simulator presents an unusual workload where the combination of an AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4070 Ti produces frame rates that scale more dramatically with resolution than the game’s visual complexity. The data shows that this pairing is capable of delivering a fluid experience across all tested settings, but the performance ceiling at lower resolutions exposes a significant bottleneck in the processor.
Resolution Scaling
The measured FPS data reveals a non-linear relationship between resolution and performance. At 1080p, the system is heavily CPU-limited; the average frame rate at Ultra settings (202.4 FPS) is only slightly lower than at High settings (203.8 FPS), indicating that the GPU is not the primary constraint. The jump to Low settings at 1080p yields 267.1 FPS, which is the highest frame rate recorded in the entire dataset, but this figure is still far below what the RTX 4070 Ti could theoretically produce if it were fully utilized at this resolution.
Moving to 1440p, the frame rates remain exceptionally high but begin to show more GPU influence. The average at Ultra settings drops to 131.9 FPS, a 35% reduction from the 1080p Ultra result, while the Low setting at 1440p (228.6 FPS) is only 14% lower than its 1080p counterpart. This suggests that the CPU is still a limiting factor at lower settings, but the GPU workload is starting to become more relevant as pixel count increases.
At 4K, the trend reverses decisively. The Ultra setting (70.1 FPS) is 47% slower than the 1440p Ultra result, and the High setting (73 FPS) shows a similar proportional drop from 137 FPS at 1440p. The Low setting at 4K (141.1 FPS) is still very playable, but the gap between Low and Ultra at 4K (141.1 vs 70.1 FPS) is much larger than the corresponding gap at 1080p (267.1 vs 202.4 FPS). This indicates that at 4K, the RTX 4070 Ti’s raw compute power is the dominant factor, and the CPU bottleneck observed at 1080p is largely resolved.
How This Combo Ranks
In the global database of tested combinations, this pairing achieves a rank of 387 out of 1769 combos for Pc Building Simulator. This places it in the top 22% of all tested systems for this game, which is a strong result given that the Ryzen 5 4600G is a budget-oriented processor. The CPU’s percentile ranking of 75 (versus all CPUs) and the GPU’s percentile ranking of 85 (versus all GPUs) suggest that the graphics card is the more capable component in this pairing, and the game’s performance data confirms this.
The combo’s rank is influenced by the fact that the RTX 4070 Ti is a high-end GPU, but the measured FPS at 1080p shows that the processor prevents the system from achieving the frame rates that the GPU alone could deliver. When compared to other combos that pair the RTX 4070 Ti with stronger CPUs, this system would likely rank lower, but the 1440p and 4K results show that the GPU can still provide a premium experience despite the CPU’s limitations.
FAQ
Q: What is the maximum average FPS this combo achieves in Pc Building Simulator?
A: The highest recorded average FPS is 267.1 at 1080p with Low settings. This is the peak performance point, but it is not representative of typical gameplay settings.
Q: Is the RTX 4070 Ti the bottleneck at 4K Ultra settings?
A: Yes, the data supports this. At 4K Ultra, the average FPS is 70.1, which is 47% lower than the 1440p Ultra result (131.9 FPS). This large drop with increasing resolution indicates GPU-bound performance.
Q: Does the Ryzen 5 4600G limit performance at 1080p?
A: Yes, the evidence is clear. At 1080p Ultra (202.4 FPS) and 1080p High (203.8 FPS), the frame rates are very close, suggesting that the CPU is the limiting factor. The GPU has headroom to render more frames, but the processor cannot feed it fast enough.
Q: What is the recommended resolution for a balanced experience?
A: The data shows that 1440p offers a good balance. At Ultra settings, the system averages 131.9 FPS, which is high enough for smooth gameplay while still leveraging the GPU’s capabilities more than at 1080p.
Q: How does the combo’s rank compare to other systems?
A: This combo ranks 387th out of 1769 tested combinations for this game, placing it in the top 22%. This is a strong result, but it is tempered by the CPU’s bottleneck at lower resolutions.
Q: Is the RTX 4070 Ti’s 12 GB VRAM sufficient for this game?
A: While the FACT PACK does not include VRAM usage data, the GPU’s performance at 4K Ultra (70.1 FPS) suggests that memory capacity is not a limiting factor for this title. The rendering workload is the primary constraint.
Measured FPS Breakdown
The complete measured FPS dataset provides a detailed picture of performance across all settings and resolutions. At 1920x1080, the system achieves an average of 267.1 FPS on Low, 234.1 FPS on Medium, 203.8 FPS on High, and 202.4 FPS on Ultra. The difference between High and Ultra is negligible (1.4 FPS), which strongly indicates a CPU bottleneck at these settings.
At 2560x1440, the averages are 228.6 FPS on Low, 191.3 FPS on Medium, 137 FPS on High, and 131.9 FPS on Ultra. The gap between High and Ultra widens slightly (5.1 FPS), but the Low-to-Ultra scaling (228.6 to 131.9 FPS) shows that the GPU is beginning to matter more. The 1440p Medium result (191.3 FPS) is still very high and would be ideal for high-refresh-rate monitors.
At 3840x2160, the averages are 141.1 FPS on Low, 100.5 FPS on Medium, 73 FPS on High, and 70.1 FPS on Ultra. The Low setting at 4K is the only one that exceeds 100 FPS, and the drop from Medium to High (100.5 to 73 FPS) is the largest single-step reduction in the entire dataset (27.5 FPS). This indicates that the High preset introduces a significant GPU workload increase that the RTX 4070 Ti handles with a substantial frame rate cost.
GPU Role
The NVIDIA GeForce RTX 4070 Ti is the dominant component in this pairing, as evidenced by its performance scaling with resolution. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. This memory configuration is more than adequate for the visual complexity of Pc Building Simulator, as the frame rates at 4K remain playable even at Ultra settings.
The GPU’s clock speeds are 2310 MHz base and 2610 MHz boost, and it delivers 40.09 TFLOPS of FP32 compute. This raw performance is what drives the 4K Low result of 141.1 FPS, which is a remarkable figure for a simulation game. The RTX 4070 Ti’s 85th percentile ranking among all GPUs is reflected in its ability to maintain high frame rates at 1440p and 4K, where the CPU bottleneck is less pronounced.
The data shows that the GPU’s role becomes more critical as resolution increases. At 1080p, the frame rates are nearly identical between High and Ultra (203.8 vs 202.4 FPS), which suggests the GPU is not fully utilized. At 4K, the difference between High (73 FPS) and Ultra (70.1 FPS) is also small, but the absolute performance is much lower, indicating that the GPU is now the primary constraint. The RTX 4070 Ti’s performance is consistent with its position as a high-end card, but the CPU prevents it from achieving its full potential at lower resolutions.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1080p gaming, the High preset (203.8 FPS) is the best choice because it offers nearly identical performance to Ultra (202.4 FPS) while presumably reducing visual quality slightly. There is no benefit to selecting Ultra at 1080p, as the CPU bottleneck makes the extra GPU work irrelevant.
For 1440p, the Medium preset (191.3 FPS) provides the best balance of visual fidelity and performance. The High preset (137 FPS) is also viable for gamers who prioritize visuals, but the 54 FPS difference between Medium and High suggests that Medium is the more efficient choice for maintaining a high refresh rate. The Ultra preset (131.9 FPS) offers only a marginal improvement over High and is not worth the additional GPU load.
For 4K gaming, the Low preset (141.1 FPS) is the only setting that provides a consistently smooth experience above 100 FPS. The Medium preset (100.5 FPS) is still playable, but the High (73 FPS) and Ultra (70.1 FPS) settings fall below the 75 FPS threshold that many gamers consider ideal for fast-paced action. Given that Pc Building Simulator is a simulation title, the Medium preset at 4K is recommended for a good balance, while Low is better for those who prioritize frame rate above all else.
CPU Role
The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. It has 8 MB of shared L3 cache and supports DDR4 memory. The CPU’s benchmark scores are modest, with a Cinebench R23 multicore score of 13593 and a single-core score of 1919, placing it in the 75th percentile of all CPUs.
The CPU’s role in this game is clearly defined by the 1080p results. The fact that the average FPS at 1080p Ultra (202.4) is nearly identical to the 1080p High result (203.8) indicates that the processor is saturating its single-thread or multi-thread capacity before the GPU can reach its limit. The CPU’s passmark single-thread score of 2653 is respectable, but it is not sufficient to fully feed a high-end GPU at low resolutions.
At 1440p and 4K, the CPU’s limitation becomes less relevant as the GPU’s rendering workload increases. The 4K Low result (141.1 FPS) is still higher than the 1080p Ultra result, which shows that the CPU can maintain high frame rates when the GPU is not the bottleneck. The Ryzen 5 4600G’s 12 threads are sufficient for this simulation game, but the relatively low single-thread performance compared to newer CPUs is what holds back the system at 1080p. The data confirms that for this specific game, the CPU is the limiting factor at 1080p, while the GPU takes over at higher resolutions.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 4070 Ti in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 141.1 |
| 3840x2160 | Medium | 100.5 |
| 3840x2160 | High | 73.0 |
| 3840x2160 | Ultra | 70.1 |
| 2560x1440 | Low | 228.6 |
| 2560x1440 | Medium | 191.3 |
| 2560x1440 | High | 137.0 |
| 2560x1440 | Ultra | 131.9 |
| 1920x1080 | Low | 267.1 |
| 1920x1080 | Medium | 234.1 |
| 1920x1080 | High | 203.8 |
| 1920x1080 | Ultra | 202.4 |
Pc Building Simulator with Ryzen 5 4600G + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RTX 4070 Ti + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.