Palworld

Palworld with an Intel Core i7-14700F and NVIDIA GeForce RTX 5070 shows a clear performance curve across resolutions, with the GPU becoming the primary constraint as pixel count rises. The data indicates this pairing is well-suited for high-refresh-rate play at 1440p, while 4K Ultra demands compromises.

Resolution Scaling

The measured FPS data shows how the RTX 5070 handles Palworld's workload as resolution increases. At 1080p Low, the system delivers 269.9 FPS, but this drops to 178.9 FPS at 1440p Low and 99.9 FPS at 4K Low. That represents a 33.7% performance hit from 1080p to 1440p, and a further 44.1% drop moving to 4K. These scaling patterns point to the GPU becoming the limiting factor at higher resolutions, while the CPU has headroom to spare at 1080p.

Looking at High settings, the frame rate falls from 168.5 FPS at 1080p to 111.1 FPS at 1440p, then to 63.6 FPS at 4K. The 4K High result sits just above the 60 FPS threshold for smooth play, but leaves little margin for demanding scenes. At Ultra settings, the trend is more punishing: 127.9 FPS at 1080p, 82.6 FPS at 1440p, and only 46.9 FPS at 4K. That 4K Ultra figure is below playable levels for most users, indicating the RTX 5070 cannot fully handle Palworld's maximum visual fidelity at native 4K.

The scaling from Medium to High at each resolution is consistent, with roughly a 25-30% frame rate reduction. This suggests the game's settings have a predictable impact on GPU load, making it easy to dial in the right balance for your display.

GPU Role

The RTX 5070's 12 GB of GDDR7 memory over a 192-bit bus provides 672.0 GB/s of bandwidth. The GPU runs at a base clock of 2325 MHz with a boost of 2512 MHz, paired with 6144 shading units and 48 RT cores. These specifications drive the measured results, with the memory bandwidth proving adequate for Palworld's open-world environments at 1440p.

The GPU's benchmark scores place it in the 83rd percentile of all GPUs, with an average benchmark score of 41687. Its nearest rival is the AMD Radeon Pro 5300, which scores 41610 — a mere 0.2% difference. The NVIDIA GeForce RTX 3090 also sits close with a score of 41441, putting the RTX 5070 0.6% ahead. This shows the RTX 5070 delivers performance comparable to last generation's high-end cards, despite its mid-range positioning.

In Palworld specifically, the GPU's 30.87 TFLOPS of FP32 compute translates to strong rasterization performance. The 80 ROPs handle pixel output at a rate of 201.0 GPixel/s, which becomes the bottleneck at 4K Ultra where the game demands 46.9 FPS. The 482.3 GTexel/s texture rate ensures detailed surfaces remain sharp at lower settings, but the sheer pixel count at 3840x2160 overwhelms the GPU at maximum quality.

The 12 GB VRAM capacity is sufficient for Palworld's current content, as evidenced by stable frame rates across all tested settings. However, the gap between 1440p High (111.1 FPS) and 4K High (63.6 FPS) shows how quickly the GPU's resources are consumed by higher resolutions.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Palworld?

A: The data shows 1440p as the sweet spot. At High settings, it delivers 111.1 FPS, comfortably above 60 FPS with room for higher refresh rates. 4K High at 63.6 FPS is playable but leaves little headroom, while 1080p at 168.5 FPS exceeds what most monitors can display.

Q: Can this system handle 4K Ultra settings?

A: No. The measured 4K Ultra result is 46.9 FPS, which falls below the 60 FPS standard for smooth gameplay. Even 4K High at 63.6 FPS is marginal. Users targeting 4K should stick to Medium (80.2 FPS) or Low (99.9 FPS) presets.

Q: How does the RTX 5070 compare to the RTX 3090 in raw benchmarks?

A: The RTX 5070 scores 41687 in average benchmark, while the RTX 3090 scores 41441. This puts the RTX 5070 0.6% ahead, indicating virtually identical raw performance despite the generational leap.

Q: Is the Core i7-14700F bottlenecking the RTX 5070 at 1080p?

A: The data suggests the CPU has significant headroom. At 1080p Low, the system reaches 269.9 FPS, which is likely near the CPU's limit, but at Higher settings the GPU becomes the constraint. The CPU's 94th percentile ranking among all processors supports this interpretation.

Q: What frame rate can I expect at 1440p Medium?

A: The measured 1440p Medium result is 144.8 FPS, which is ideal for 144Hz monitors. This setting provides a strong balance between visual quality and performance, outperforming High by 33.7 FPS.

Q: How does the combo rank among all tested configurations in Palworld?

A: This CPU/GPU combination ranks 317th out of 1718 tested combos, placing it in the top 18.5% of all systems tested for this game.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce 269.9 FPS, Medium reaches 218.7 FPS, High hits 168.5 FPS, and Ultra drops to 127.9 FPS. The spread from Low to Ultra is 142 FPS, showing how much performance is available at this resolution. Even Ultra exceeds 120 FPS, making 1080p suitable for competitive play or high-refresh-rate displays.

Moving to 2560x1440, the performance remains strong. Low settings yield 178.9 FPS, Medium achieves 144.8 FPS, High provides 111.1 FPS, and Ultra falls to 82.6 FPS. The 1440p results show a smoother degradation curve, with each settings tier costing roughly 30-35 FPS. High settings at 1440p still clear 100 FPS, making this the recommended resolution for most users.

At 3840x2160, the GPU begins to struggle. Low delivers 99.9 FPS, Medium drops to 80.2 FPS, High falls to 63.6 FPS, and Ultra bottoms out at 46.9 FPS. The 4K results show a steeper drop from Medium to High (16.6 FPS loss) than from High to Ultra (16.7 FPS loss), indicating the game's Ultra preset imposes significant additional load. For 4K owners, Medium settings provide the best combination of visual quality and playable frame rates.

CPU Role

The Intel Core i7-14700F brings 20 cores and 28 threads to Palworld, running at a base clock of 2.10 GHz with a boost of 5.40 GHz. Its 33 MB of shared L3 cache and Raptor Lake architecture provide strong single-thread performance, which is critical for the game's simulation and physics systems. The CPU's 94th percentile ranking among all processors reflects its capability.

In synthetic benchmarks, the i7-14700F scores 35443 in Cinebench R23 multi-core and 5003 in single-core. Its Geekbench results show 16571 multi-core and 2711 single-core. These numbers place it just 0.6% behind the AMD Ryzen 9 9900X, which scores 54450 on average, and 1.1% behind the Ryzen 9 9900X3D at 54681. The i7-14700F outperforms the Intel Xeon Phi 7290 by 1.2% and the AMD EPYC 7313P by 1.7%.

For Palworld specifically, the CPU's 28 threads handle the game's many concurrent systems, including Pals, base building, and world simulation. The 2.10 GHz base clock ensures sustained performance under load, while the 5.40 GHz boost clock delivers quick response in single-threaded tasks. The 65 W TDP and dual-channel DDR4/DDR5 memory support make this a practical choice for gaming builds.

The data shows the CPU is not the limiting factor in Palworld. At 1080p Low, the system reaches 269.9 FPS, which likely approaches the CPU's maximum frame generation capability. However, at all settings above Low, the GPU becomes the constraint, as evidenced by the consistent frame rate drops when increasing resolution.

Settings Recommendations

For 1440p displays, High settings at 111.1 FPS provide the best experience. This preset offers excellent visual quality while maintaining frame rates well above 60 FPS, with enough headroom for demanding scenes. Users with 144Hz monitors can drop to Medium at 144.8 FPS for a smoother experience with minor visual compromises.

At 4K, Medium settings at 80.2 FPS are the clear choice. This configuration delivers smooth gameplay while retaining decent visuals. High at 63.6 FPS is borderline acceptable, but the 20.8% performance gain from Medium makes it the safer recommendation. Ultra at 46.9 FPS should be avoided unless you prioritize visuals over playability.

For 1080p users, Ultra at 127.9 FPS is the recommended setting. The i7-14700F and RTX 5070 have enough performance to run maximum settings while still exceeding 120 FPS, providing a fully immersive experience without sacrificing smoothness. Even if you have a 240Hz monitor, High at 168.5 FPS remains a viable option.

The overall picture is clear: this system excels at 1440p and 1080p, delivering high frame rates across all settings. At 4K, users must choose between Medium for performance or High for visual fidelity, with Ultra reserved for screenshot purposes rather than actual gameplay. The RTX 5070's 12 GB VRAM and 672.0 GB/s bandwidth are sufficient for Palworld's current content, and the i7-14700F provides ample CPU headroom for this title.