Palworld

The data for Palworld on the AMD Ryzen 9 5950X with the NVIDIA GeForce RTX 5070 shows a system that is heavily influenced by graphics settings, with performance scaling that points to a strong balance between the CPU and GPU at most resolutions. The measured frames per second (FPS) across the board indicate that this combination is capable of high refresh rate gaming at 1080p and 1440p, while 4K remains a more demanding target. This analysis breaks down the results to understand the role each component plays.

Resolution Scaling

The FPS drop from 1920x1080 to 3840x2160 is significant and follows the expected pattern of increasing graphical load. At Low settings, the average FPS falls from 268.6 at 1080p to 177.4 at 1440p, and then to 97.1 at 4K. This represents a 63.8% drop from 1080p to 4K, which is a substantial reduction, but the absolute numbers remain high, suggesting the GPU is still the primary driver of performance at this setting. The scaling is similar for Medium settings, where the average drops from 221.2 at 1080p to 141.6 at 1440p and 77.3 at 4K, a 65.1% reduction.

The pattern becomes more pronounced at higher graphical presets. With High settings, the average FPS is 166 at 1080p, which drops to 112.8 at 1440p and 58.8 at 4K. The drop from 1080p to 1440p is 32%, while the drop from 1440p to 4K is 48%. This increasing percentage drop at higher resolutions is typical of a GPU-bound scenario, where the rendering resolution has a greater impact on the graphics card's workload. The Ultra preset shows the most severe scaling, with an average of 127.5 at 1080p, falling to 83.4 at 1440p and 48.8 at 4K. The 4K result is barely playable, indicating that the Ultra preset is too demanding for smooth gameplay at this resolution.

The data suggests that the limiting component shifts depending on the resolution and settings. At 1080p with Low settings, the system is likely CPU-bound, as the high frame rates of 268.6 FPS would put a significant load on the processor. However, as resolution and graphical fidelity increase, the bottleneck moves to the GPU. The RTX 5070, with its 12 GB of GDDR7 memory, is the component that determines the upper limit of performance at 1440p and 4K.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture. Its high core count is a defining feature, and its benchmark scores reflect a strong multi-threaded capability. For example, it scores 38,607 in Cinebench R23 multicore and 45,424 in Passmark multithread. These scores place it in the 93rd percentile of all CPUs, indicating that it is a top-tier processor for heavily threaded workloads. However, Palworld's performance is not solely dependent on multi-core strength; the single-thread performance is also important.

The 5950X's boost clock of 4.90 GHz and its single-thread benchmark scores, such as 5,450 in Cinebench R23 and 944 in 3dMark single-thread, are competitive. This is crucial for games that have a significant single-threaded component. The nearest rivals in the database, including the Intel Core i5-14600K and the AMD EPYC 4345P, have similar average scores, with the 5950X being only -0.2% and -1.1% behind them, respectively. This indicates that the CPU's performance is well within the expected range for its class.

In the context of the measured FPS, the CPU's role appears to be more critical at lower resolutions and settings. At 1080p Low, the system achieves 268.6 FPS, which is a high enough frame rate that the CPU's ability to feed the GPU becomes a potential limiting factor. The 5950X's strong single-thread performance helps to mitigate this, but the data shows that the frame rate ceiling at 1080p is determined by a combination of CPU and GPU capabilities. As settings increase, the CPU's workload relative to the GPU decreases, and the Ryzen 9's ample core count ensures it does not become a bottleneck for the RTX 5070.

GPU Role

The NVIDIA GeForce RTX 5070 is the primary driver of the graphical performance in this combination. It features 12 GB of GDDR7 memory on a 192-bit bus, providing a memory bandwidth of 672.0 GB/s. Its boost clock of 2512 MHz and its 6144 shading units allow it to handle the demands of modern games at high resolutions. The GPU's benchmark scores, such as 29,137 in Passmark G3D and 30.87 TFLOPS FP32, place it in the 83rd percentile of all GPUs.

The GPU's role becomes increasingly dominant as the resolution and settings are increased. The measured FPS data shows that the RTX 5070 is capable of delivering excellent performance at 1440p, with an average of 141.6 FPS on Medium and 112.8 FPS on High settings. This makes 1440p a sweet spot for this GPU, as it can handle high settings with a comfortable margin above the 60 FPS threshold. At 4K, the GPU is pushed much harder. The average FPS at High settings drops to 58.8, which is just below the standard 60 FPS target, while the Medium preset achieves 77.3 FPS.

The GPU's memory capacity is a factor at 4K with high settings. With 12 GB of VRAM, the RTX 5070 has enough memory for most games at this resolution, but the performance drop from 1440p to 4K indicates that the GPU's compute power, rather than its memory capacity, is the limiting factor. The data shows that the RTX 5070 is a strong performer for 1440p gaming, but it requires a reduction in settings to maintain high frame rates at 4K. The benchmark results also show that it is closely matched with the NVIDIA GeForce RTX 3090, which has a deltaPct of 0.6%, suggesting similar performance levels in synthetic tests.

How This Combo Ranks

In the database of tested combinations for Palworld, this specific pairing of the Ryzen 9 5950X and RTX 5070 ranks 341st out of 1,718 tested combos. This places it in the top 20% of all tested systems, which is a strong showing. The rank is a composite measure that takes into account the performance across all tested resolutions and settings. Given the high individual component performance, the relative position of this combo makes sense.

The combo's rank is likely influenced by the CPU's strong multi-threaded performance, which helps in scenarios where the game can utilize more cores. The RTX 5070's performance is also a key factor, as it is a modern GPU with high-end capabilities. However, the rank is not higher because the combination is not at the absolute top tier. There are 340 other combinations that have achieved higher average FPS in Palworld, likely featuring more powerful GPUs or CPUs that are better optimized for this specific game.

The data suggests that this combo is a very capable mid-to-high-end system. It outperforms the vast majority of tested combinations, but it is not the absolute best. The rank of 341 out of 1,718, which places it in the 80th percentile, indicates that it will provide a very good gaming experience, but users looking for the highest possible frame rates at 4K Ultra settings may need to consider higher-end options. The performance is consistently good across all settings, making it a reliable choice for a variety of gaming scenarios.

Measured FPS Breakdown

The measured FPS data provides a clear picture of what to expect from this combination at different resolutions and settings. At 1920x1080, the system is exceptionally fast. With Low settings, it achieves an average of 268.6 FPS, which is ideal for high refresh rate monitors. Medium settings deliver 221.2 FPS, High settings deliver 166 FPS, and even Ultra settings maintain a high average of 127.5 FPS. This shows that at 1080p, users can comfortably play with any preset and still achieve a very playable frame rate.

Moving to 2560x1440, the performance drops but remains strong. Low settings average 177.4 FPS, Medium settings average 141.6 FPS, and High settings average 112.8 FPS. These are all excellent results for 1440p gaming, allowing for smooth gameplay with high visual fidelity. The Ultra preset at 1440p averages 83.4 FPS, which is still above the 60 FPS threshold and provides a good experience for those who prioritize visual quality.

At 3840x2160, the system faces its biggest challenge. Low settings average 97.1 FPS, which is very good for 4K. Medium settings average 77.3 FPS, which is also playable. However, High settings drop to 58.8 FPS, and Ultra settings fall to 48.8 FPS. These results show that for 4K gaming, it is necessary to use Medium or Low settings to maintain a frame rate that is consistently above 60 FPS. The High and Ultra presets are playable but may feel less smooth, especially in fast-paced action.

Settings Recommendations

Based on the measured data, the optimal settings depend on the user's resolution and performance goals. For 1920x1080, the Ultra preset is the best choice, as it delivers an average of 127.5 FPS, which is well above the threshold for smooth gameplay. There is no need to lower settings at this resolution, as even the most demanding preset provides a high frame rate.

For 2560x1440, the High preset offers the best balance of visual quality and performance, with an average of 112.8 FPS. This provides a smooth and visually impressive experience. The Ultra preset is also viable, with 83.4 FPS, but the High preset offers a significant performance headroom with a minor visual difference. For users who prioritize maximum frame rates, the Medium preset at 141.6 FPS is also an excellent option.

For 3840x2160, the Medium preset is the recommended starting point, as it achieves an average of 77.3 FPS. This provides a good balance between visual fidelity and smoothness. The Low preset, at 97.1 FPS, is the best choice for those who want the highest frame rates at 4K. The High preset, at 58.8 FPS, is borderline for a 60 FPS target, and the Ultra preset, at 48.8 FPS, is best avoided for competitive play. The data clearly shows that for a consistent 60+ FPS experience at 4K, users should select the Medium or Low preset. The RTX 5070's capabilities are best utilized at 1440p, where it can handle high settings with ease.