Palworld

Palworld places the Intel Core i7-14700F and NVIDIA GeForce RTX 3080 Ti combo in the 464th position out of 1718 tested configurations, placing it in the top 27% of all pairings. This is a strong result for a survival title, indicating that the combination delivers a high-refresh-rate experience at mainstream resolutions while remaining playable at 4K. The CPU’s 20 cores and 28 threads, combined with the GPU’s 12 GB of GDDR6X memory, provide a balanced platform, though the data reveals distinct bottlenecks depending on the resolution and preset selected.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows the highest average FPS at 1920x1080, where the combo reaches 246.9 FPS on Low settings. At 2560x1440, the average FPS drops to 162.8 on Low, while at 3840x2160, it falls to 88.8 on Low. For a balance of visual fidelity and performance, 2560x1440 on High settings yields 99.5 FPS, which is a solid target for most players.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Core i7-14700F has an average benchmark score of 54097, which is 0.6% lower than the AMD Ryzen 9 9900X (score 54450) and 1.1% lower than the AMD Ryzen 9 9900X3D (score 54681). It is 1.2% higher than the Intel Xeon Phi 7290 (score 53469) and 1.7% higher than the AMD EPYC 7313P (score 53206). This places it in the 94th percentile of all CPUs.

Q: What is the GPU’s performance percentile and how does it stack up?

A: The RTX 3080 Ti sits in the 83rd percentile of all GPUs with an average benchmark score of 41224. Its closest rival, the RTX 3090, scores 41441, which is 0.5% higher. The AMD Radeon Pro 5300 (score 41610) is 0.9% higher, and the RTX 5070 (score 41687) is 1.1% higher, while the Tesla M40 (score 41897) leads by 1.6%.

Q: Does the CPU have integrated graphics?

A: No, the Intel Core i7-14700F does not include an integrated GPU, as indicated by the "null" value for integratedGraphics. This means a discrete graphics card is mandatory for any display output, making the RTX 3080 Ti an essential component in this pairing.

Q: What memory types does the CPU support?

A: The Core i7-14700F supports both DDR4 and DDR5 memory, with a dual-channel memory bus. This flexibility allows for a wide range of motherboard and memory configurations, though the benchmark data does not specify which type was used in the measured FPS results.

Q: How does the FPS scale from 1080p to 4K at High settings?

A: At High settings, the combo delivers 157.2 FPS at 1920x1080, 99.5 FPS at 2560x1440, and 54.4 FPS at 3840x2160. This represents a 36.7% drop from 1080p to 1440p and a 65.4% drop from 1080p to 4K, showing that higher resolutions increasingly tax the GPU.

Settings Recommendations

The measured data provides a clear hierarchy across presets. At 1920x1080, the Low preset achieves 246.9 FPS, which is far beyond what most displays can show, making it unnecessary for competitive play unless targeting extreme refresh rates. The Medium preset at 204.5 FPS and High at 157.2 FPS both offer excellent headroom for high-refresh monitors, with Ultra still delivering a very playable 118.4 FPS.

At 2560x1440, the story shifts slightly. Low delivers 162.8 FPS, Medium drops to 130.3 FPS, and High comes in at 99.5 FPS, which is still above the 60 FPS threshold for smooth gameplay. Ultra falls to 76.8 FPS, which remains playable but begins to show the GPU’s limits. For a high-refresh 1440p display, Medium or High are the sweet spots, balancing visual quality with frame rates well above 100 FPS.

At 3840x2160, the data shows a more constrained picture. Low hits 88.8 FPS, Medium drops to 73.3 FPS, and High falls to 54.4 FPS, while Ultra bottoms out at 45.1 FPS. For 4K gaming, the recommendation is clear: use Medium settings to maintain a frame rate above 70 FPS, as High and Ultra sacrifice too much performance for marginal visual gains. The step from Low to Medium costs 15.5 FPS, but the visual uplift is significant, making Medium the optimal choice for 4K.

Resolution Scaling

The FPS scaling from 1920x1080 to 3840x2160 reveals the GPU as the primary limiting factor. At Low settings, the drop from 246.9 FPS at 1080p to 88.8 FPS at 4K is a 64.0% reduction. At High settings, the drop from 157.2 FPS to 54.4 FPS is a 65.4% reduction. This consistent scaling across presets indicates that the RTX 3080 Ti’s pixel throughput is the bottleneck, not the CPU.

The CPU’s role becomes more apparent at lower resolutions. At 1080p with Low settings, the 246.9 FPS figure suggests that the i7-14700F can feed the GPU with enough frames to saturate its rendering capacity. However, as resolution increases, the GPU’s workload grows, and the frame rate drops proportionally, confirming that Palworld is GPU-bound at 1440p and 4K. The 12 GB GDDR6X memory and 384-bit bus width provide ample bandwidth (912.4 GB/s) for texture-heavy scenes, but the 45.1 FPS at 4K Ultra shows that the card’s raw compute power is stretched at the highest settings.

How This Combo Ranks

The combo’s rank of 464 out of 1718 tested configurations places it in the 73rd percentile of all pairings. This is a respectable position, given that the RTX 3080 Ti is an end-of-life product from the GeForce 30-series, while newer architectures exist. The ranking suggests that the i7-14700F’s strong multi-core performance (Cinebench R23 multi-core score of 35443) helps boost the combo above many alternatives that might pair a weaker CPU with a similar GPU.

The CPU’s 94th percentile ranking among all CPUs contrasts with the GPU’s 83rd percentile, indicating that the processor is relatively stronger than the graphics card in this pairing. This imbalance is not problematic in Palworld, as the FPS data shows the GPU is the limiting factor at higher resolutions. The combo’s ranking would likely improve if paired with a more powerful GPU, but the current configuration delivers smooth 1440p gameplay and acceptable 4K performance, making it a well-rounded choice for this title.

GPU Role

The RTX 3080 Ti’s 12 GB of GDDR6X memory, clocked at 19 Gbps effective, provides a bandwidth of 912.4 GB/s over a 384-bit bus. This memory configuration is critical for Palworld’s open-world environments, which require rapid streaming of textures and geometry. At 4K Ultra, the FPS drops to 45.1, indicating that the 34.10 TFLOPS of FP32 compute is insufficient for fully maxed settings at that resolution, but the 88.8 FPS at 4K Low shows the card is still capable when settings are tuned.

The GPU’s boost clock of 1665 MHz and base clock of 1365 MHz place it in a moderate range for the Ampere architecture. The 10240 shading units and 320 tensor cores provide substantial parallel processing power, which is reflected in the Passmark G3D score of 26896. The card’s 83rd percentile ranking among all GPUs is slightly below the CPU’s 94th percentile, but the measured FPS data in Palworld shows that the combo still achieves high frame rates, particularly at 1080p and 1440p. The 350 W TDP and 750 W suggested PSU indicate a power-hungry component, but the benchmark results justify this for users prioritizing high-refresh gaming.