Palworld

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 580 produces a highly variable experience in Palworld, one that is heavily dependent on the resolution and quality preset selected. The measured frame rates span from a barely playable 12.7 FPS at 4K Ultra to a smooth 80.1 FPS at 1080p Low, indicating that this combination is best suited for lower resolutions and settings. This analysis breaks down the measured data to show where this combo excels, where it struggles, and what the numbers say about the balance between the CPU and GPU.

Resolution Scaling

The frame rate drop from 1080p to 4K is severe, revealing a system that is overwhelmingly bound by the graphics card. At High settings, the average frame rate falls from 51.3 FPS at 1920x1080 to 31.7 FPS at 2560x1440, a substantial reduction. Pushing further to 3840x2160, the average plummets to 17.7 FPS, which is roughly a third of the 1080p performance. This scaling pattern is a classic indicator of a GPU-limited scenario; the RX 580’s 256.0 GB/s memory bandwidth and 6.175 TFLOPS of FP32 compute are simply overwhelmed by the increasing pixel count.

The trend is consistent across all settings. At Low, the system goes from 80.1 FPS at 1080p to 52.7 FPS at 1440p, and then down to 28.7 FPS at 4K. The drop from 1440p to 4K is particularly steep, with performance nearly halving. This suggests that the 4K resolution is beyond the practical capabilities of this GPU for Palworld, regardless of the quality preset. The data suggests that even at the lowest settings, the RX 580 cannot maintain a playable 30 FPS at 4K, as the average is 28.7 FPS.

The limiting component is clearly the GPU. The Ryzen 5 5600, with its 6 cores and 12 threads, appears to have enough headroom at these frame rates. The fact that performance degrades so predictably and dramatically with resolution increases points to the fill-rate and memory bandwidth constraints of the RX 580. For a smoother experience, users would need to target 1080p, where the GPU has a more manageable workload, or accept low frame rates at higher resolutions.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Palworld?

A: Based on the measured data, 1920x1080 is the only resolution where this combination achieves consistently playable frame rates. At this resolution, the average FPS ranges from 35.3 (Ultra) to 80.1 (Low), while at 2560x1440, the best average is 52.7 FPS on Low, and at 3840x2160, no preset reaches an average above 28.7 FPS.

Q: Can this system handle Ultra settings in Palworld?

A: Only at 1080p, where it produces an average of 35.3 FPS. At 1440p, the Ultra preset drops to an average of 26.8 FPS, and at 4K, it becomes unplayable at an average of 12.7 FPS. The data indicates that Ultra settings are only viable at the lowest resolution tested.

Q: How much of a performance difference is there between Low and High settings at 1080p?

A: The difference is significant. At 1920x1080, the Low preset yields an average of 80.1 FPS, while the High preset yields an average of 51.3 FPS. This represents a performance reduction of roughly 36% when moving from Low to High settings.

Q: Is the CPU or GPU the bottleneck in this configuration?

A: The benchmark results indicate the GPU is the primary bottleneck. The frame rate drops sharply and consistently as resolution increases from 1080p to 4K, which is a hallmark of a graphics card that is maxed out. The Ryzen 5 5600’s performance appears sufficient to feed the RX 580 at these frame rates.

Q: What is the frame rate at 1440p Medium settings?

A: The measured average FPS for the 2560x1440 resolution with Medium settings is 41.5 FPS. This is a playable frame rate, though it is noticeably lower than the 67.3 FPS achieved at the same settings on a 1920x1080 display.

Q: How does the RX 580 compare to its closest rivals in terms of overall benchmark score?

A: The RX 580 has an average benchmark score of 13559. Its nearest rival, the NVIDIA GeForce GTX 570, scores 13564, a delta of 0%. The AMD Radeon Pro 455 is 1.1% slower, and the NVIDIA P106-090 is 1.1% faster. This shows the RX 580 is positioned in a very tight performance cluster.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture. Its base clock is 3.50 GHz and it can boost up to 4.40 GHz. In the context of Palworld, this CPU appears to be more than adequate for the frame rates the RX 580 can deliver. The measured FPS data shows a consistent GPU limitation; if the CPU were the bottleneck, we would expect to see frame rates plateau at a similar level across different resolutions, which is not the case.

The CPU’s benchmark scores reinforce its capability. For example, it scores 18309 in Cinebench R23 multicore and 2584 in single-core. This level of single-thread performance is important for game logic and physics, while the 12 threads handle background tasks and streaming. The Ryzen 5 5600 sits in the 79th percentile of all CPUs, with an average benchmark score of 21765. Its nearest rival, the Intel Core i7-11700F, scores 21957, a delta of -0.9%, putting them on par.

In this specific pairing, the CPU's role is to provide a stable platform without introducing stutter or frame pacing issues. The data suggests that it succeeds in this role, as the performance scaling with resolution is smooth and predictable, pointing entirely to the GPU as the limiting factor. The 32 MB of shared L3 cache likely helps with game asset access, but the primary takeaway is that the Ryzen 5 5600 has ample headroom here and is not the reason for low frame rates at higher resolutions.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 5600 and AMD Radeon RX 580 ranks 1606 out of 1718 tested combos in Palworld. This places it in the bottom 7% of all tested configurations, a ranking that reflects the GPU's age and performance class rather than a specific incompatibility. The combo's low rank is consistent with the measured FPS data, which shows it struggling at higher resolutions.

The GPU's percentile ranking of 53 means it performs better than roughly half of all GPUs in the database, but its absolute performance is far from the top. The CPU, on the other hand, ranks in the 79th percentile, showing it is a significantly stronger component than the GPU in this pairing. The combo's rank is therefore dragged down by the RX 580, which is an end-of-life product (released in 2017) with a 14 nm process node and a 185 W TDP.

The data shows a clear imbalance. While the Ryzen 5 5600 is a capable modern processor, the RX 580 is an older, entry-level graphics card. The combination ranks poorly because the GPU cannot keep pace with the CPU's potential, especially in a demanding game like Palworld. For a better ranking, a more modern and powerful GPU would be required, but as it stands, this combo is positioned for 1080p gaming at medium-to-low presets.

Measured FPS Breakdown

The measured FPS data provides a complete picture of this combo's performance across twelve different settings and resolution configurations.

• 1920x1080: This is the sweet spot. At Low settings, the combo achieves an average of 80.1 FPS. Medium settings yield 67.3 FPS. High settings produce 51.3 FPS, and Ultra settings drop to 35.3 FPS. All of these are playable, with even Ultra being above the 30 FPS threshold.

• 2560x1440: Performance starts to become less consistent here. Low settings average 52.7 FPS, which is still quite good. Medium settings average 41.5 FPS, which is acceptable. High settings drop to 31.7 FPS, which is borderline. Ultra settings fall to an average of 26.8 FPS, which is below the playable threshold for many.

• 3840x2160: This resolution is not viable for this combo. Low settings average 28.7 FPS, and Medium settings average 25.7 FPS. High settings drop to 17.7 FPS, and Ultra settings are essentially unplayable at 12.7 FPS. The GPU is completely overwhelmed at this resolution.

The data shows a clear pattern: the frame rate is almost directly tied to the rendering resolution. The differences between Low and Ultra presets at the same resolution are also significant, with Ultra often costing more than half the frame rate of Low. This indicates that the RX 580's limited compute and memory bandwidth are the primary constraints.

Settings Recommendations

Based strictly on the measured FPS, the recommended settings for this combo depend heavily on the display resolution.

For 1920x1080 displays, the High preset is the best balance of visual quality and performance, delivering an average of 51.3 FPS. This is a smooth, playable experience. For users who prioritize frame rate over visuals, the Low preset offers a significant boost to 80.1 FPS, which is ideal for competitive or high-refresh-rate play. The Medium preset at 67.3 FPS is a solid middle ground, but High provides a better visual experience for a modest performance cost.

For 2560x1440 displays, the Low preset is the only configuration that provides a consistently smooth experience, with an average of 52.7 FPS. The Medium preset, at 41.5 FPS, is playable but may have noticeable dips in busy areas. The High preset at 31.7 FPS is borderline and not recommended for a stable experience. Ultra should be avoided at this resolution.

For 3840x2160 displays, there are no recommended settings. Even the Low preset, at 28.7 FPS, fails to reach a consistent 30 FPS. The data shows that this combo is not suitable for 4K gaming in Palworld. Users with a 4K display would need to significantly lower the resolution scale or consider a hardware upgrade to achieve a playable frame rate.

The data suggests that the High preset at 1080p is the optimal configuration for this pairing, offering a good visual experience without sacrificing playability. Dropping to Medium or Low at 1080p is advisable if a higher and more stable frame rate is desired.