Overpower

Resolution Scaling

The measured frame rates across resolutions reveal a system that scales predictably with pixel count, though the relationship is not perfectly linear. At 1080p with Low settings, the combo delivers 161.7 FPS, which drops to 142.9 FPS at 1440p and 126 FPS at 4K. That represents a 22% reduction from 1080p to 4K, indicating that even at the lowest settings, the GPU remains the primary limiter rather than the CPU.

Moving to Medium settings, the scaling pattern shifts slightly. The 1080p result of 103.9 FPS falls to 92.6 FPS at 1440p (an 11% drop) and then to 76.8 FPS at 4K (a further 17% drop). The total reduction from 1080p to 4K at Medium is 26%, which is steeper than at Low settings. This suggests that as graphical complexity increases, the GPU's workload grows disproportionately with resolution, which is typical for a rasterization-bound title.

High settings tell a similar story but with different magnitudes. At 1080p, the average is 94.3 FPS. At 1440p, it drops to 85.4 FPS, and at 4K, it reaches 71.1 FPS. The cumulative loss from 1080p to 4K is 24.6%. Notably, the gap between 1080p and 1440p is a modest 9.4%, while the gap between 1440p and 4K is 16.7%. This indicates that the pixel-count transition from 1440p to 4K imposes a heavier load on the GPU, likely due to the 2.25x increase in total pixels.

Ultra settings produce the most resolution-sensitive behavior. At 1080p, the average is 75.4 FPS. This falls to 68.6 FPS at 1440p, a 9% reduction, and then to 57.4 FPS at 4K, a 16.3% further reduction. The overall drop from 1080p to 4K is 23.9%. Across all settings, the pattern is consistent: the largest relative losses occur between 1440p and 4K. This points to the GPU's memory bandwidth and pixel throughput becoming increasingly strained as resolution climbs.

The data also shows that the CPU is not a bottleneck in this configuration. The Ryzen 9 5900X, with its 12 cores and 24 threads, provides ample headroom. At 1080p Low, the system achieves 161.7 FPS, and the scaling to 4K is smooth rather than abrupt. If the CPU were limiting, we would expect to see diminishing returns at lower resolutions, but the consistent frame rates across the resolution ladder suggest the GPU is the constraining factor. The 8 GB VRAM capacity on the RTX 5060, paired with a 128-bit bus, likely contributes to the degradation at 4K, where texture and geometry demands outpace the available memory bandwidth.

Settings Recommendations

Based on the measured rows, the optimal settings balance depends on the target resolution and desired frame rate. At 1080p, Medium settings deliver 103.9 FPS, which is comfortably above the 60 FPS threshold and provides a 10.2% improvement over High settings' 94.3 FPS. For users seeking higher refresh rates, Low settings at 161.7 FPS is the only option that clears 144 Hz, but the visual compromise may not be worth it for a game that appears to scale well with settings.

At 1440p, Medium settings produce 92.6 FPS, which is a 9.3% improvement over High's 85.4 FPS. The jump from Medium to Low is more substantial: 142.9 FPS represents a 54% increase over Medium. This makes Low settings the only viable choice for 144 Hz displays at this resolution. However, for standard 60 Hz monitors, High settings at 85.4 FPS offer a solid visual experience without dipping below the refresh rate.

At 4K, the situation becomes more constrained. Medium settings yield 76.8 FPS, which is above 60 FPS but not by a wide margin. High settings drop to 71.1 FPS, still playable but closer to the edge. Ultra settings at 57.4 FPS fall below the 60 FPS target, making it unsuitable for smooth gameplay. The recommended approach for 4K is Medium settings, which provide a 35% improvement over Ultra while maintaining a frame rate that is 28% higher than the Ultra result.

The data suggests that the "best experience" across all resolutions is Medium settings. It offers a balanced frame rate that exceeds 60 FPS at every resolution, from 103.9 FPS at 1080p down to 76.8 FPS at 4K. High settings are acceptable for 1080p and 1440p, but at 4K they leave little headroom. Ultra settings are only advisable at 1080p, where 75.4 FPS is still respectable, but the 4K Ultra result of 57.4 FPS is a clear indicator to avoid that combination.

GPU Role

The RTX 5060's specifications align with the observed performance pattern. Its 8 GB of GDDR7 memory operates at 1750 MHz with a 128-bit bus, yielding a bandwidth of 448.0 GB/s. This bandwidth is a critical factor in resolution scaling, as the measured FPS drops at 4K correlate with the increased memory pressure. The GPU's boost clock of 2497 MHz and base clock of 2280 MHz provide the raw compute throughput, but the 48 ROPs and 120 TMUs determine how efficiently pixels are processed.

The GPU's benchmark scores place it in the 73rd percentile among all GPUs, with an average benchmark score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, has an average score of 30097, representing a 0% delta. This near-identical performance suggests the RTX 5060 is positioned in a competitive tier. The 19.18 TFLOPS FP32 throughput and 119.9 GPixel/s pixel rate are indicative of a mid-range card that can handle modern titles at 1080p and 1440p, but the 4K results show its limits.

The VRAM capacity of 8 GB is a potential constraint in this game at higher resolutions. At 4K Ultra, the average FPS drops to 57.4, and the combination of high resolution and Ultra settings likely exceeds the comfortable VRAM footprint. The memory clock of 1750 MHz (28 Gbps effective) is fast, but the 128-bit bus limits total bandwidth compared to wider-memory cards. This is visible in the scaling pattern: the FPS loss from 1440p to 4K is consistently larger than from 1080p to 1440p, across all settings.

The GPU's power characteristics also play a role. With a TDP of 145 W and a suggested PSU of 300 W, the RTX 5060 is efficient for its class. The dual-slot design and single 8-pin connector make it accessible, but the performance data shows that it is best suited for 1080p and 1440p gaming. The 4K results, while playable at Medium settings, do not offer the headroom typical of higher-tier GPUs.

Measured FPS Breakdown

At 1920x1080, the full settings range is available. Low settings produce an average of 161.7 FPS, the highest recorded for this combo. Medium settings reduce the average to 103.9 FPS, a 35.7% decrease. High settings yield 94.3 FPS, which is 9.2% lower than Medium. Ultra settings drop to 75.4 FPS, a 20% reduction from High and a 53.4% reduction from Low. The progression from Low to Ultra is steep, indicating that each settings tier adds significant graphical load.

At 2560x1440, the same settings ladder shows a compressed range. Low settings average 142.9 FPS, which is 11.6% lower than the 1080p Low result. Medium settings produce 92.6 FPS, an 8.9% decrease from 1080p Medium. High settings reach 85.4 FPS, a 9.4% drop from 1080p High. Ultra settings average 68.6 FPS, a 9% reduction from 1080p Ultra. The percentage losses from 1080p to 1440p are relatively uniform, ranging from 8.9% to 11.6%, suggesting a consistent scaling factor.

At 3840x2160, the losses become more pronounced. Low settings average 126 FPS, which is 11.8% lower than the 1440p Low result. Medium settings drop to 76.8 FPS, a 17.1% decrease from 1440p Medium. High settings yield 71.1 FPS, a 16.7% reduction from 1440p High. Ultra settings fall to 57.4 FPS, a 16.3% decrease from 1440p Ultra. The 4K transition imposes a heavier penalty across all settings, with losses consistently above 16% except for Low settings.

The absolute numbers reveal that the combo is most comfortable at 1080p, where even Ultra settings exceed 75 FPS. At 1440p, Medium and High settings remain above 85 FPS, while Ultra dips to 68.6 FPS. At 4K, only Low and Medium settings exceed 60 FPS, with High at 71.1 FPS and Ultra at 57.4 FPS. The data indicates that users targeting 4K should select Medium settings as the highest playable option, while those prioritizing frame rate should consider 1080p Low for maximum smoothness.

How This Combo Ranks

The combo's rank in Overpower is 864 out of 1744 tested combinations, placing it in the 50.5th percentile. This is a middle-of-the-pack result, which is consistent with the hardware pairing: a high-end CPU from 2020 combined with a mid-range GPU from 2025. The Ryzen 9 5900X is a strong processor, ranking in the 90th percentile among all CPUs with an average benchmark score of 39453. Its nearest rival, the AMD EPYC 4245P, has a score of 39383 (0.2% delta), while the Intel Core i7-13700F scores 39095 (0.9% delta).

The GPU, however, is less dominant. The RTX 5060 ranks in the 73rd percentile among all GPUs with an average score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, scores 30097 (0% delta), while the NVIDIA Tesla M60 scores 29969 (0.5% delta). This places the GPU in a competitive but not leading position. The combination of a 90th-percentile CPU with a 73rd-percentile GPU results in a system that is CPU-heavy, which matters less in a GPU-bound game like Overpower.

The rank of 864 out of 1744 suggests that many other combinations achieve better performance in this title. This is likely due to the GPU being the bottleneck; pairing the Ryzen 9 5900X with a stronger GPU would yield higher frame rates. The CPU's capabilities, such as its Cinebench R23 multicore score of 33150 and single-core score of 4680, are not fully utilized in this scenario. The data indicates that the combo is balanced for productivity workloads but suboptimal for gaming, where the GPU's 8 GB VRAM and 128-bit bus limit performance at higher resolutions.

FAQ

Q: What is the highest average FPS this combo achieves in Overpower?

A: The highest recorded average is 161.7 FPS at 1920x1080 with Low settings.

Q: Can this combo run Overpower at 4K Ultra settings smoothly?

A: No. At 3840x2160 with Ultra settings, the average FPS is 57.4, which falls below the 60 FPS threshold.

Q: How does the RTX 5060 compare to its nearest GPU rival?

A: The RTX 5060 has an average benchmark score of 30109, while the AMD Radeon RX 7700 XT scores 30097, a 0% delta.

Q: What is the best settings choice for 1440p gaming?

A: Medium settings at 92.6 FPS is the highest preset above 60 FPS, while Low settings at 142.9 FPS is suitable for high-refresh-rate displays.

Q: Does the CPU become a bottleneck at lower resolutions?

A: No. The Ryzen 9 5900X provides sufficient headroom, as evidenced by the smooth scaling from 1080p to 4K at all settings.

Q: What is the combo's rank among all tested configurations?

A: It ranks 864 out of 1744 combinations, placing it in the middle of the pack for Overpower.