Barony

# Barony with AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060

The AMD Ryzen 9 5900X paired with the NVIDIA GeForce RTX 5060 delivers a striking performance profile in Barony, a roguelike title that rewards high frame rates given its fast-paced procedural gameplay. This combination ranks 838th out of 1,702 tested combos in this game, placing it in the upper-middle tier of the database. The measured frame rates reveal a system that can push well beyond 200 FPS at lower resolutions but begins to show its constraints as resolution and settings scale upward, making it a capable but not unrestricted performer for this title.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and tells a clear story about where the bottleneck shifts. At 1080p Low, the combo produces 359.5 FPS, which falls to 228.3 FPS at 1440p Low — a 36.5% reduction — and then to 119.7 FPS at 4K Low, representing a 66.7% drop from the 1080p baseline. This pattern indicates that at lower resolutions, the CPU is the limiting component, as the frame rates far exceed what a GPU-bound workload would typically sustain. The Ryzen 9 5900X, with its 12 cores and 24 threads, provides substantial headroom that is only fully utilized when the GPU is not saturated.

At Ultra settings, the scaling is even more pronounced but follows a similar trajectory: 167.5 FPS at 1080p, 105.4 FPS at 1440p (a 37.1% reduction), and 56.8 FPS at 4K (a 66.1% reduction from 1080p). The consistency of these percentage drops across settings suggests that resolution, not graphical complexity, is the primary factor driving performance changes. However, the absolute values at 4K Ultra — 56.8 FPS — indicate that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus become significant constraints. The data implies that Barony's rendering demands at 4K exceed what this GPU can comfortably deliver, particularly with higher preset quality levels.

The gap between Low and Ultra settings widens as resolution increases: 192 FPS difference at 1080p (359.5 vs 167.5) versus 62.9 FPS at 4K (119.7 vs 56.8). This narrowing gap suggests that at higher resolutions, the GPU is working closer to its maximum capacity regardless of settings, whereas at 1080p, the CPU can still feed the GPU enough frames to make settings changes more impactful.

GPU Role

The RTX 5060's specifications provide critical context for these results. With 8 GB of GDDR7 memory on a 128-bit bus delivering 448.0 GB/s bandwidth, the GPU has moderate memory capacity but respectable throughput for a modern mid-range card. The 2,280 MHz base clock and 2,497 MHz boost clock, combined with 3,840 shading units, produce 19.18 TFLOPS of FP32 performance. These figures place the GPU at the 73rd percentile versus all GPUs in the database, with an average benchmark score of 30,109.

In Barony, the GPU's role becomes more evident at 4K, where the Ultra preset yields 56.8 FPS — a figure that drops below the 60 FPS threshold many players consider playable. The 4K Medium result of 87.7 FPS and 4K High result of 77.1 FPS show that even reducing settings cannot fully compensate for the memory bandwidth limitations at this resolution. The GPU's pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s are adequate for 1080p and 1440p workloads, but the 448.0 GB/s bandwidth appears to be the limiting factor when pushing 4K resolutions.

Interestingly, the GPU's nearest rivals include the AMD Radeon RX 7700 XT with a deltaPct of 0, meaning they perform identically in average benchmark scores, and the NVIDIA GeForce RTX 5070 Mobile at 0.6% higher performance. This indicates the RTX 5060 sits in a competitive mid-range position, but Barony's specific demands at high resolutions expose its memory configuration as a weakness.

Settings Recommendations

The measured data provides clear guidance for optimizing the experience across different resolutions. At 1080p, Ultra settings at 167.5 FPS offer the best visual quality while still maintaining frame rates far above refresh rate requirements for most displays. The 1080p Medium preset at 265.5 FPS and High at 232 FPS provide even more headroom for competitive play, but the Ultra setting remains viable for those prioritizing visuals.

At 1440p, the recommendation shifts. Medium settings at 168.1 FPS offer an excellent balance, while High at 143.1 FPS remains smooth and visually rich. Ultra at 105.4 FPS is still playable, but the 37% drop from Medium may not justify the visual improvements for a fast-paced roguelike where reaction speed matters. Low at 228.3 FPS is available for players seeking maximum responsiveness, though the visual compromises are significant.

At 4K, the choices become more constrained. Low settings at 119.7 FPS provide the smoothest experience, while Medium at 87.7 FPS offers a reasonable middle ground. High at 77.1 FPS is borderline, and Ultra at 56.8 FPS dips below the 60 FPS threshold. For 4K play, Medium settings appear to be the optimal recommendation — it captures 87.7 FPS while retaining enough graphical fidelity to appreciate Barony's dungeon environments. The data indicates that High and Ultra at 4K tax the GPU beyond its comfortable operating range, resulting in frame rates that could cause noticeable stuttering during intense combat sequences.

FAQ

Q: Can this combo maintain 60+ FPS at 4K Ultra in Barony?

A: No. The measured average at 4K Ultra is 56.8 FPS, which falls below the 60 FPS threshold. The 4K High preset at 77.1 FPS and Medium at 87.7 FPS both exceed 60 FPS.

Q: What is the best resolution for this combo to achieve 144+ FPS?

A: At 1080p, all settings from Low through High exceed 144 FPS, with Ultra at 167.5 FPS also above this mark. At 1440p, Low (228.3 FPS) and Medium (168.1 FPS) both surpass 144 FPS, but High (143.1 FPS) falls just short.

Q: How much performance is gained by dropping from Ultra to Low at 1080p?

A: The difference is 192 FPS. Ultra runs at 167.5 FPS while Low runs at 359.5 FPS, representing a 114.6% improvement in average frame rate.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The data suggests the GPU becomes the limiting factor even at 1080p, as evidenced by the substantial performance differences between settings — 359.5 FPS at Low versus 167.5 FPS at Ultra. The CPU's 12-core, 24-thread configuration provides ample processing headroom.

Q: Does the RTX 5060 outperform its nearest GPU rival in Barony?

A: The RTX 5060's average benchmark score of 30,109 is virtually identical to the AMD Radeon RX 7700 XT at 30,097 (0% deltaPct). The data does not include per-game comparisons for Barony, so relative performance in this specific title cannot be determined from the available metrics.

Q: How does the combo rank among all tested configurations?

A: This combo ranks 838th out of 1,702 tested combos, placing it in the 49.2nd percentile of all configurations in the database for Barony performance.

How This Combo Ranks

The combo's rank of 838 out of 1,702 places it almost exactly in the middle of all tested configurations, which is intriguing given the individual components' standings. The CPU sits at the 90th percentile versus all CPUs with an average benchmark score of 39,453, while the GPU is at the 73rd percentile versus all GPUs with an average score of 30,109. The combination's mid-pack ranking in Barony suggests that the game's performance characteristics do not fully leverage the strengths of either component, or that the GPU's memory limitations cap the system's overall potential.

The CPU's nearest rivals help contextualize its standing: the AMD EPYC 4245P at 0.2% higher average score, the AMD Ryzen 7 PRO 8845HS at 0.7% lower, and the Intel Core i7-13700F at 0.9% higher. These deltas are minimal, indicating the Ryzen 9 5900X is well-matched against contemporary alternatives. The GPU's rivals show even tighter clustering, with the RX 7700 XT at 0% delta and the RTX 5070 Mobile at 0.6% higher. This suggests the combo's mid-pack rank in Barony is not due to component weakness but rather the game's specific engine demands, which appear to favor neither extreme CPU throughput nor raw GPU compute.

CPU Role

The Ryzen 9 5900X brings substantial processing power to this pairing, with 12 cores and 24 threads based on the Zen 3 architecture. Its base clock of 3.70 GHz and boost clock of 4.80 GHz, combined with 64 MB of L3 cache, provide strong single-threaded and multi-threaded performance. The CPU's benchmark results confirm its capability: a Cinebench R23 multi-core score of 33,150 and single-core score of 4,680, with a Geekbench multi-core score of 11,877 and single-core of 2,202.

In Barony, the CPU's role is most apparent at lower resolutions and settings where frame rates exceed 300 FPS. At 1080p Low, the 359.5 FPS result indicates the CPU can process game logic and physics fast enough to feed the GPU at extremely high rates. The 3DMark scores further illustrate this: 9,075 in 16-thread tests and 10,075 at max threads, showing strong scaling across its 12 cores. However, the PassMark single-thread score of 3,469 suggests that Barony's primary thread may not fully utilize the CPU's single-core potential, as the game's roguelike nature likely relies on discrete game logic operations rather than heavily threaded workloads.

The 105 W TDP and 7 nm TSMC process node indicate efficient power delivery, allowing sustained boost clocks during extended gaming sessions. The dual-channel DDR4 memory support with 51.2 GB/s bandwidth provides adequate memory throughput for the CPU's operations, though this may become a secondary bottleneck in scenarios where the GPU is not saturated.

Measured FPS Breakdown

The complete measured FPS dataset reveals consistent patterns across all resolution and settings combinations:

At 1920x1080, the combo achieves 359.5 FPS on Low, 265.5 FPS on Medium, 232 FPS on High, and 167.5 FPS on Ultra. The progression from Low to Ultra shows a 192 FPS spread, with each settings increase producing diminishing returns in visual quality relative to the frame rate cost.

At 2560x1440, performance drops to 228.3 FPS on Low, 168.1 FPS on Medium, 143.1 FPS on High, and 105.4 FPS on Ultra. The spread narrows to 122.9 FPS, reflecting the GPU's increased workload at this resolution.

At 3840x2160, the results are 119.7 FPS on Low, 87.7 FPS on Medium, 77.1 FPS on High, and 56.8 FPS on Ultra. The spread narrows further to 62.9 FPS, indicating that at 4K, the GPU is the dominant constraint regardless of settings. The 4K Ultra result of 56.8 FPS is the only measured configuration that falls below 60 FPS, making it the sole data point where the combo fails to maintain smooth gameplay by conventional standards.

Across all resolutions, the Low-to-Ultra performance ratio remains relatively consistent at approximately 2.1x at 1080p, 2.2x at 1440p, and 2.1x at 4K. This consistency suggests that Barony's settings scale predictably with GPU load, and the RTX 5060's performance characteristics remain stable across the resolution range. The data indicates that players targeting 144 FPS should use Medium settings at 1440p or Ultra at 1080p, while those with 4K displays should select Medium settings to maintain frame rates above 85 FPS.