Downfall
This combination delivers exceptional performance with an average of 126 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 73 | 88 | 109 |
| 1440p QHD | 75 | 112 | 138 | 173 |
| 1080p Full HD | 103 | 159 | 196 | 237 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060, In-Depth Analysis
# Downfall with AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060
The AMD Ryzen 9 5900X paired with the NVIDIA GeForce RTX 5060 delivers a broad performance envelope in Downfall, a horror title from 2016. Across the measured resolution and settings matrix, this combination produces average frame rates ranging from 46.9 FPS at 4K Ultra to 237.2 FPS at 1080p Low. The data indicates a system that remains fluid at lower resolutions but begins to strain under the combined load of 4K resolution and maximum quality settings, with the scaling pattern revealing a clear shift in bottleneck behavior as resolution increases.
Resolution Scaling
The measured FPS data shows a pronounced and consistent drop as resolution climbs from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 158.5 FPS at 1080p to 112.4 FPS at 1440p, then further to 73.2 FPS at 4K. This represents a 53.8% reduction from 1080p to 4K at High settings. The pattern is similar across all quality presets, but the magnitude of the drop varies with settings level.
At Low settings, the system delivers 237.2 FPS at 1080p, dropping to 172.5 FPS at 1440p and 108.7 FPS at 4K. The 4K figure is still comfortably above 60 FPS, indicating that even at the highest resolution, the combination retains playable performance when visual fidelity is minimized. Medium settings show 195.6 FPS at 1080p, 137.8 FPS at 1440p, and 87.7 FPS at 4K. Ultra settings present the most demanding scenario: 102.7 FPS at 1080p, 74.7 FPS at 1440p, and only 46.9 FPS at 4K — the sole configuration that falls below the 60 FPS threshold.
The scaling behavior suggests that at 1080p, the CPU is capable of feeding the GPU sufficiently to reach very high frame rates, particularly at Low settings where 237.2 FPS indicates the GPU is the limiting factor only at the highest output levels. As resolution increases to 1440p and 4K, the pixel throughput demand grows, and the GPU becomes progressively more dominant as the bottleneck. The gap between Low and Ultra settings at 1080p is 134.5 FPS, while at 4K that gap narrows to 61.8 FPS, confirming that resolution scaling compresses the performance spread across quality presets — a hallmark of GPU-bound operation at higher resolutions.
CPU Role
The AMD Ryzen 9 5900X is a 12-core, 24-thread processor based on the Zen 3 architecture (Vermeer), manufactured on TSMC's 7 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 4.80 GHz, with 64 MB of L3 cache. In synthetic benchmarks, the processor achieves a 3DMark single-thread score of 941 and a max-thread score of 10,075, while Cinebench R23 results show 4,680 points single-core and 33,150 multi-core. The Geekbench scores are 2,202 single-core and 11,877 multi-core.
The CPU's percentile ranking against all tested processors is 90th, placing it well above the median. Its average benchmark score of 39,453 sits within 1% of its nearest rivals: the AMD EPYC 4245P (39,383, +0.2% delta), AMD Ryzen 7 PRO 8845HS (39,747, -0.7% delta), Intel Core i7-13700F (39,095, +0.9% delta), and Intel Core i7-13700 (39,857, -1% delta). This grouping indicates that the 5900X delivers competitive compute performance relative to these alternatives, with differences that are effectively negligible in real-world gaming scenarios.
In Downfall, the CPU's role is most evident at 1080p Low settings, where the system reaches 237.2 FPS. At this resolution and settings level, the GPU is less stressed by pixel fill requirements, allowing the processor's high single-thread performance (3DMark single-thread 941) and substantial thread count to drive frame generation. The 12-core/24-thread configuration provides ample headroom for the game's background tasks, though Downfall, as a 2016 horror title, is unlikely to fully utilize all 24 threads. The boost clock of 4.80 GHz is particularly relevant for maintaining high frame rates in scenes with many active entities, where per-thread performance directly influences frame pacing.
GPU Role
The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture (GB206 chip) using TSMC's 5 nm process. It features 8 GB of GDDR7 memory on a 128-bit bus, providing 448.0 GB/s of bandwidth. The GPU operates at a base clock of 2280 MHz with a boost clock of 2497 MHz, and memory runs at 1750 MHz (28 Gbps effective). The card includes 3,840 shading units, 120 TMUs, 48 ROPs, 30 RT cores, and 120 tensor cores.
In synthetic benchmarks, the RTX 5060 achieves a Passmark G3D score of 20,891 and a Geekbench OpenCL score of 120,785. Its percentile ranking against all GPUs is 73rd, with an average benchmark score of 30,109. The nearest rivals are tightly clustered: the AMD Radeon RX 7700 XT (30,097, 0% delta), AMD Radeon RX 570 (30,158, -0.2% delta), NVIDIA Tesla M60 (29,969, +0.5% delta), and NVIDIA GeForce RTX 5070 Mobile (29,928, +0.6% delta). This grouping places the RTX 5060 in a competitive mid-range position, with performance nearly identical to the RX 7700 XT in aggregate benchmarks.
In Downfall, the GPU's memory configuration and clock speeds directly influence the scaling pattern observed. The 8 GB VRAM capacity is sufficient for the game's requirements, as evidenced by the ability to run 4K Ultra at 46.9 FPS without indication of memory-related stuttering. The 448.0 GB/s bandwidth allows the card to maintain throughput at higher resolutions, though the 128-bit bus width constrains peak bandwidth compared to wider-memory alternatives. The boost clock of 2497 MHz provides the raw compute throughput (19.18 TFLOPS FP32) needed to handle the pixel shading workload at 4K, where the system drops to 73.2 FPS at High settings — a 46.3% reduction from the 1440p High figure of 112.4 FPS.
How This Combo Ranks
The AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060 combination ranks 842nd out of 1,741 tested combos in Downfall, placing it in the 48th percentile of all tested systems. This middle-of-the-pack ranking reflects the balance between the high-performing CPU (90th percentile) and the mid-range GPU (73rd percentile). The combination's performance is sufficient to deliver playable frame rates at 1080p and 1440p across all settings, but the 4K Ultra configuration falls below 60 FPS, indicating that this pairing is not optimized for maximum resolution gaming.
The rank of 842 suggests that many other combinations in the database achieve higher average performance in this title, likely due to more powerful GPUs that can sustain higher frame rates at 4K. However, the data also shows that this combo outperforms a significant portion of tested systems, and the CPU's strong synthetic scores (Cinebench R23 multi-core 33,150) indicate that this pairing would be well-suited for scenarios where the GPU is not the primary constraint. The rank is consistent with the measured FPS data — the system excels at 1080p where it reaches 237.2 FPS at Low settings, but the GPU's 73rd percentile ranking becomes the limiting factor as resolution and settings increase.
FAQ
Q: What is the highest average FPS this combination achieves in Downfall?
A: The highest measured average FPS is 237.2, achieved at 1920x1080 with Low settings. At High settings, the 1080p average is 158.5 FPS.
Q: Can this combo handle 4K gaming in Downfall?
A: At 4K resolution, the system delivers 73.2 FPS at High settings, 87.7 FPS at Medium, and 108.7 FPS at Low. However, at Ultra settings, the average drops to 46.9 FPS, which is below the 60 FPS threshold.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 9 5900X has an average benchmark score of 39,453, which is within 1% of the AMD EPYC 4245P (39,383, +0.2% delta), AMD Ryzen 7 PRO 8845HS (39,747, -0.7% delta), Intel Core i7-13700F (39,095, +0.9% delta), and Intel Core i7-13700 (39,857, -1% delta).
Q: What is the GPU's synthetic benchmark ranking?
A: The RTX 5060 ranks in the 73rd percentile of all GPUs, with an average benchmark score of 30,109. Its closest rival is the AMD Radeon RX 7700 XT with a score of 30,097 and a 0% delta.
Q: What is the biggest performance gap between quality settings at the same resolution?
A: At 4K, the gap between Low (108.7 FPS) and Ultra (46.9 FPS) is 61.8 FPS. At 1080p, the gap between Low (237.2 FPS) and Ultra (102.7 FPS) is 134.5 FPS.
Q: How does the combo rank relative to all tested combinations in Downfall?
A: This combination ranks 842nd out of 1,741 tested combos, placing it in the 48th percentile of all systems tested in this game.
Hardware Specifications
AMD Ryzen 9 5900X
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060 in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 108.7 |
| 3840x2160 | Medium | 87.7 |
| 3840x2160 | High | 73.2 |
| 3840x2160 | Ultra | 46.9 |
| 2560x1440 | Low | 172.5 |
| 2560x1440 | Medium | 137.8 |
| 2560x1440 | High | 112.4 |
| 2560x1440 | Ultra | 74.7 |
| 1920x1080 | Low | 237.2 |
| 1920x1080 | Medium | 195.6 |
| 1920x1080 | High | 158.5 |
| 1920x1080 | Ultra | 102.7 |
Downfall with Ryzen 9 5900X + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with RTX 5060 + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 9 5900X + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.