Overpower

# Overpower with AMD Ryzen 7 5700 + Intel Arc B370

The AMD Ryzen 7 5700 paired with the Intel Arc B370 delivers a playable but constrained experience in Overpower, with the GPU acting as the clear performance ceiling across all tested resolutions. The combo ranks 2742nd out of 2980 tested combinations, placing it in the bottom 8% of systems, and the measured frame rates reveal a platform that is consistently limited by its graphics solution rather than the processor.

Resolution Scaling

The data shows a predictable but steep performance drop as resolution increases from 1080p to 4K, with the Arc B370 exhibiting a pattern that strongly indicates GPU-bound behavior at every setting level. At Low settings, the average frame rate falls from 65 FPS at 1920x1080 to 58 FPS at 2560x1440, a reduction of 10.8%, and then drops further to 49 FPS at 3840x2160, representing a 24.6% decline from the 1080p baseline. This scaling curve is relatively shallow compared to what would be expected from a balanced system, suggesting the GPU is already near its limits even at the lowest resolution.

Moving to Medium settings, the resolution scaling becomes more pronounced: 41 FPS at 1080p drops to 36 FPS at 1440p (a 12.2% decrease) and then to 31 FPS at 4K (a 24.4% drop from 1080p). The High preset shows a similar pattern with 38 FPS at 1080p, 34 FPS at 1440p (a 10.5% decline), and 28 FPS at 4K (a 26.3% reduction). Ultra settings follow the same trajectory: 31 FPS at 1080p, 28 FPS at 1440p (a 9.7% drop), and 24 FPS at 4K (a 22.6% decline from 1080p).

The consistency of these percentage drops across all four settings presets — roughly 10% from 1080p to 1440p and another 15-16% from 1440p to 4K — reveals that the limiting component is the GPU. A CPU-bound scenario would show much smaller frame rate differences between resolutions, since the processor's workload does not scale with pixel count. The fact that the Arc B370's score of 1184 in 3DMark Steel Nomad DX12 places it at the 5th percentile of all GPUs, with its nearest rival being the ATI Mobility Radeon HD 5570 (1186, -0.2%) and the AMD FirePro M2000 (1168, +1.4%), confirms that this is an entry-level graphics solution that cannot maintain high frame rates as pixel count grows.

Settings Recommendations

Given the measured frame rates, the Low preset offers the only consistently playable experience across all resolutions, and even then only at 1080p does it approach smooth territory. At 1920x1080 Low, the system delivers 65 FPS average, which is the only reading above 60 FPS in the entire dataset. At 2560x1440 Low, the average drops to 58 FPS — still within a playable range for many action titles — while 3840x2160 Low yields 49 FPS, which is borderline but workable for less demanding scenes.

The Medium preset, by contrast, falls below 60 FPS at every resolution: 41 FPS at 1080p, 36 FPS at 1440p, and 31 FPS at 4K. The minimum frame rates recorded for Medium are 34 FPS at 1080p, 31 FPS at 1440p, and 26 FPS at 4K, meaning the experience will dip into the low 30s or high 20s during demanding moments. High settings reduce averages further to 38 FPS at 1080p, 34 FPS at 1440p, and 28 FPS at 4K, while Ultra bottoms out at 31 FPS at 1080p, 28 FPS at 1440p, and 24 FPS at 4K — all of which fall short of the 30 FPS target for a consistently smooth experience except at the lowest resolution.

For players prioritizing frame rate stability, Low at 1080p is the clear choice, as it is the only configuration that maintains an average above 60 FPS. For those willing to accept lower performance for improved visuals, Medium at 1080p provides a reasonable middle ground with a 41 FPS average and minimums of 34 FPS, though it requires compromising on resolution to stay playable. The step from Medium to High yields only a 3 FPS gain at 1080p, making it a poor trade-off for the additional visual load, and Ultra offers no meaningful benefit over High given the marginal differences in the data.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 architecture processor built on TSMC's 7 nm process, featuring 8 cores and 16 threads with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its benchmark results show a strong multithreaded performer: Cinebench R23 multicore scores 20,655, while the single-core result is 2,916. Geekbench reports 9,959 for multicore and 1,907 for single-core, and 3DMark results range from 901 in the single-thread test to 6,628 in the 16-thread test, with max-thread performance at 6,617 — nearly identical to the 16-thread result, indicating that the processor scales well with additional threads up to its full core count.

The CPU's percentile ranking of 78 among all processors, with an average benchmark score of 25,517, places it well above the GPU's 5th percentile ranking. Its nearest rivals include the Intel Xeon D-2752TER (25,530, -0.1%), AMD Ryzen 5 7640U (25,485, +0.1%), AMD Ryzen 5 6600H (25,550, -0.1%), and AMD Ryzen 7 5825U (25,446, +0.3%), all of which are within 0.3% of the Ryzen 7 5700's average score. This clustering suggests that the processor's performance is well understood and consistent, with no significant outliers in its class.

In Overpower, the CPU's role is largely one of providing sufficient headroom that it never becomes the bottleneck. The resolution scaling data — showing consistent frame rate drops as pixel count increases — indicates that the game is not CPU-limited at any tested configuration. Even at 1080p Low, where the GPU delivers 65 FPS, the CPU's 8-core/16-thread configuration, with its 16 MB of L3 cache and dual-channel DDR4 memory support at 51.2 GB/s bandwidth, provides ample processing power for the game's action genre demands. The 3DMark single-thread score of 901 and 2-thread score of 1,762 suggest that even lightly threaded workloads are handled competently, while the jump to 5,585 in the 8-thread test demonstrates strong scaling that would benefit any multicore game engine.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700 and Intel Arc B370 achieves a rank of 2742 out of 2980 tested combinations in Overpower, placing it in the bottom 8% of all systems. This ranking is heavily influenced by the GPU, which sits at the 5th percentile of all graphics cards and has an average benchmark score of just 1,184 — a figure that is nearly matched by the ATI Mobility Radeon HD 5570 (1,186, -0.2%) and ATI Radeon HD 5770 (1,190, -0.5%), both of which are over a decade old. The CPU, by contrast, performs at the 78th percentile, meaning the processor is more than capable of supporting a much faster GPU.

The disparity between the CPU's and GPU's percentile rankings explains the overall combo ranking. A system with a top-quartile processor and a bottom-quintile GPU will inevitably be constrained by the graphics card, and the measured frame rates confirm this. The rank of 2742 out of 2980 suggests that the vast majority of tested combos deliver better performance, but it also indicates that the CPU is not the limiting factor — upgrading the GPU would yield substantial gains, whereas upgrading the CPU would provide little benefit in this specific game.

The data shows that the combo's performance in Overpower is almost entirely a function of the GPU's capabilities. With the Arc B370's 3DMark Steel Nomad DX12 score of 1,184 and its position relative to rivals like the AMD Radeon HD 7650M (1,192, -0.7%) and AMD FirePro M2000 (1,168, +1.4%), the graphics card is simply not equipped for modern action titles at high settings. The CPU's 78th percentile ranking, with an average benchmark score of 25,517, stands in stark contrast, making it clear that this combo's low rank is a GPU problem rather than a balanced system deficiency.

GPU Role

The Intel Arc B370 is built on Intel's 3 nm process using the Xe3-LPG architecture and Panther Lake chip, with a base clock of 300 MHz and a boost clock of 2,400 MHz. It features 1,280 shading units, 40 texture mapping units, and 20 raster operation pipelines, along with 10 ray tracing cores. The GPU's memory is marked as "System Shared," meaning it relies on shared system memory rather than dedicated VRAM, with bandwidth described as "System Dependent" — a design choice that significantly limits its performance in bandwidth-sensitive applications.

The GPU's compute capabilities are modest: FP32 performance is rated at 6.144 TFLOPS, with FP16 at 12.29 TFLOPS (2:1), a pixel rate of 48.00 GPixel/s, and a texture rate of 96.00 GTexel/s. Its 25 W TDP and IGP slot width indicate it is designed for integrated or low-power applications rather than discrete gaming performance. The 3DMark Steel Nomad DX12 benchmark score of 1,184 places it at the 5th percentile of all GPUs, with its nearest rivals — the ATI Mobility Radeon HD 5570 (1,186, -0.2%), ATI Radeon HD 5770 (1,190, -0.5%), AMD Radeon HD 7650M (1,192, -0.7%), and AMD FirePro M2000 (1,168, +1.4%) — all from a bygone era of graphics hardware.

In Overpower, the GPU's role is decisive. The measured frame rates across all resolutions and settings are consistent with a graphics solution that is severely underpowered for the game's demands. The 3DMark result of 1,184, which is essentially tied with the ATI Radeon HD 5770's score of 1,190, suggests that the Arc B370 delivers performance comparable to a mid-range GPU from roughly 2009. The shared memory architecture, with its system-dependent bandwidth, further constrains performance, as the GPU must compete with the CPU for memory access, though the CPU's dual-channel DDR4 bandwidth of 51.2 GB/s provides a baseline that is adequate for the GPU's modest compute throughput.

Measured FPS Breakdown

At 1920x1080, the system delivers an average of 65 FPS on Low settings, 41 FPS on Medium (with minimums of 34 and maximums of 47), 38 FPS on High, and 31 FPS on Ultra. The 1080p Low result is the only measurement above 60 FPS in the entire dataset, and it represents a significant 58.5% improvement over the 1080p Ultra result of 31 FPS. The progression from Low to Medium to High to Ultra at 1080p shows diminishing returns: dropping from Low to Medium costs 24 FPS, while dropping from Medium to High costs only 3 FPS, and from High to Ultra costs another 7 FPS.

At 2560x1440, the averages are 58 FPS on Low, 36 FPS on Medium (with minimums of 31 and maximums of 42), 34 FPS on High, and 28 FPS on Ultra. The 1440p Low result is 7 FPS below the 1080p Low result, maintaining the pattern of approximately 10% degradation per resolution step. The Medium setting at 1440p shows a minimum of 31 FPS, which is below the 30 FPS threshold that many players consider the floor for acceptable action gameplay, while High and Ultra both fall below that threshold entirely.

At 3840x2160, the averages drop to 49 FPS on Low, 31 FPS on Medium (with minimums of 26 and maximums of 35), 28 FPS on High, and 24 FPS on Ultra. The 4K Low result remains the most playable configuration at this resolution, though it is 16 FPS below the 1080p Low result. The 4K Medium minimum of 26 FPS is the lowest recorded in the dataset, indicating that demanding scenes will cause noticeable stuttering. The Ultra preset at 4K, with its 24 FPS average, is effectively unplayable for an action game, as it falls well below the standard for smooth motion.

FAQ

*Q: What is the best settings preset for 1080p gaming in Overpower?*

A: Low settings at 1920x1080 delivers 65 FPS average, which is the only configuration above 60 FPS. Medium drops to 41 FPS, High to 38 FPS, and Ultra to 31 FPS, so Low is the only preset that maintains a consistently smooth experience.

Q: How does the Intel Arc B370 compare to its nearest GPU rivals?

A: The Arc B370 scores 1,184 in 3DMark Steel Nomad DX12, which is 0.2% below the ATI Mobility Radeon HD 5570 (1,186), 0.5% below the ATI Radeon HD 5770 (1,190), 0.7% below the AMD Radeon HD 7650M (1,192), and 1.4% above the AMD FirePro M2000 (1,168).

Q: Is the AMD Ryzen 7 5700 the bottleneck in this system?

A: No. The CPU ranks at the 78th percentile of all processors with an average benchmark score of 25,517, while the GPU ranks at the 5th percentile. The resolution scaling data shows frame rate drops consistent with GPU limitation, indicating the processor is not the constraint.

*Q: Can this combo run Overpower at 4K?*

A: Only at Low settings with a 49 FPS average. Medium delivers 31 FPS with minimums of 26, High delivers 28 FPS, and Ultra delivers 24 FPS. For playable 4K performance, Low is the only viable option, and even then it falls short of 60 FPS.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: Low delivers 58 FPS, while Ultra delivers 28 FPS — a 30 FPS difference. Medium (36 FPS) and High (34 FPS) sit between them, with Medium providing a 2 FPS advantage over High.

Q: How does the CPU's multithreaded performance compare to its single-thread performance?

A: The Ryzen 7 5700 scores 20,655 in Cinebench R23 multicore and 2,916 in single-core, showing strong scaling. PassMark multithread scores 24,303 versus 3,296 for single-thread. 3DMark results show 6,628 in 16-thread and 901 in single-thread, with max-thread at 6,617.