Overpower

Overpower is a demanding 2023 action title that scales heavily with both CPU and GPU, and this pairing of the AMD Ryzen 5 7400F with the NVIDIA GeForce RTX 4070 SUPER produces a strong, high-refresh-rate experience across all tested settings. The data shows a system capable of exceeding 100 FPS at 4K on high settings, which is a notable achievement, but the scaling patterns reveal where the bottlenecks lie and how to optimize the experience for your specific display.

Resolution Scaling

The measured FPS data reveals a predictable but important scaling pattern as resolution increases. At 1080p with Low settings, the combo achieves 235 FPS, which drops to 210 FPS at 1440p and further to 178 FPS at 4K. This represents a 24% performance drop from 1080p to 4K at Low settings, indicating that even at the lowest graphical load, the GPU is still the primary driver of frame rates, though the CPU is clearly capable of feeding it enough data to maintain very high output.

However, the scaling becomes much more pronounced as graphical settings increase. Moving from 1080p to 4K at High settings shows a drop from 137 FPS to 103 FPS, a 25% reduction. At Ultra settings, the drop is from 113 FPS at 1080p to 86 FPS at 4K, a 24% reduction. This consistent ~24-25% drop across all settings when moving from 1080p to 4K suggests that the RTX 4070 SUPER is the limiting component at higher resolutions, as the pixel throughput demand increases more than the CPU’s ability to prepare frames.

The most telling data point is the comparison between Low and Ultra at each resolution. At 1080p, the gap between Low (235 FPS) and Ultra (113 FPS) is 122 FPS, meaning Ultra is 52% slower. At 4K, the gap between Low (178 FPS) and Ultra (86 FPS) is 92 FPS, making Ultra 52% slower as well. This proportional relationship indicates that the GPU is being utilized consistently across resolutions, and the performance scaling is purely a function of the GPU’s rendering workload rather than any CPU limitation at lower resolutions.

The 4K Medium setting shows an average of 112 FPS, which is remarkably close to the 1080p Ultra result of 113 FPS. This suggests that at 4K, the GPU is the definitive bottleneck, as the same frame rate is achieved with significantly different CPU loads. The data indicates that if you are targeting 4K, the CPU has ample headroom, and the experience will be dictated entirely by the RTX 4070 SUPER’s capabilities.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 Raphael architecture, with a base clock of 3.70 GHz and a boost clock of 4.70 GHz. It features 32 MB of shared L3 cache and supports DDR5 memory in a dual-channel configuration. In synthetic benchmarks, this CPU achieves a Cinebench R23 multi-core score of 21765 and a single-core score of 3072, placing it in the 83rd percentile among all CPUs.

The CPU’s single-thread performance is particularly relevant for Overpower, as the game’s frame pacing at high refresh rates depends heavily on the processor’s ability to issue draw calls quickly. The single-core score of 3072 in Cinebench R23 indicates strong per-thread performance, which supports the high frame rates seen at 1080p Low (235 FPS). The multi-core score of 21765 also suggests that the 6-core/12-thread configuration is sufficient for the game’s background simulation and physics workloads, as the frame rates remain stable across all tested resolutions.

Benchmark results show this CPU performs nearly identically to its closest rivals, with a 0.1% difference from the Intel Core i5-14600T and a 0.2% difference from the Intel Core Ultra 7 155H. This indicates that the Ryzen 5 7400F is not a bottleneck in this system, as any of these processors would deliver essentially the same frame rates in Overpower. The CPU’s 65W TDP and unlocked multiplier also make it a practical choice for overclocking, but the data shows that stock performance is already sufficient to keep the RTX 4070 SUPER fed at all resolutions.

The fact that frame rates at 4K Ultra (86 FPS) are only 27 FPS lower than at 1080p Ultra (113 FPS) suggests that the CPU is not the limiting factor at any resolution. If the CPU were the bottleneck, the drop from 1080p to 4K would be much smaller, as the GPU would be waiting on the CPU. Instead, the consistent performance scaling across resolutions confirms that the RTX 4070 SUPER is the primary constraint, with the Ryzen 5 7400F providing ample headroom for the GPU to operate at its full potential.

FAQ

Q: Can this combo achieve 60 FPS at 4K with maximum settings?

A: Yes. The measured data shows 86 FPS average at 4K Ultra settings, which exceeds the 60 FPS target by 43%. This provides a comfortable margin for demanding scenes that may cause frame drops.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7400F scores 32750 in the average benchmark, which is 0.1% higher than the Intel Core i5-14600T (32707) and 0.2% higher than the Intel Core Ultra 7 155H (32697). It is 0.2% lower than the AMD Ryzen 7 PRO 6850H (32812), but the differences are negligible.

Q: What is the best resolution for competitive play in Overpower?

A: For maximum frame rates, 1080p Low delivers 235 FPS, which is ideal for high-refresh-rate monitors. However, 1440p Low still provides 210 FPS, offering a good balance between visual clarity and performance.

Q: Is the RTX 4070 SUPER a stronger performer than its nearest GPU rivals?

A: The data shows the RTX 4070 SUPER has an average benchmark score of 43223, which is 0.1% lower than the NVIDIA Quadro M6000 24 GB (43262) and 0.1% lower than the NVIDIA GeForce RTX 5050 Mobile (43268). It is 1% lower than the NVIDIA GeForce RTX 4090 Mobile (43667), but these differences are minimal.

Q: How much performance is gained by lowering settings from Ultra to Medium at 1440p?

A: At 1440p, Medium settings deliver 131 FPS compared to 101 FPS at Ultra, representing a 30% performance increase. This is a significant gain that may be worthwhile for players seeking higher refresh rates.

Q: Does the CPU’s 6-core/12-thread configuration limit performance in Overpower?

A: No. The data shows that the 6-core/12-thread Ryzen 5 7400F delivers frame rates that scale consistently with GPU load, indicating it is not a bottleneck. The CPU’s strong single-core performance supports high frame rates at all resolutions.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 SUPER ranks 422nd out of 2980 tested combos in Overpower, placing it in the top 14.2% of all configurations. This is a strong result, indicating that the pairing is well-balanced for this game, with neither component severely limiting the other.

The rank is particularly impressive given the CPU’s relatively modest 6-core configuration. The data suggests that many of the combos ranked above this likely feature more expensive processors or higher-tier GPUs, but the performance difference is not always proportional to the cost increase. The 83rd percentile rankings for both the CPU and GPU independently suggest that each component is solidly above average, and their combination produces a synergistic result that punches above its individual parts.

In practical terms, this rank means the combo is capable of delivering playable frame rates at all tested settings and resolutions. The fact that it achieves 86 FPS at 4K Ultra places it in the upper echelon of systems tested, as many combos would struggle to maintain 60 FPS at that resolution. The rank also indicates that the system has headroom for future games, as the GPU and CPU are both well above the median performance level.

The nearest rivals for this combo are not explicitly listed, but the individual component rankings suggest that systems with the Intel Core i5-14600T or the AMD Ryzen 7 PRO 6850H paired with the RTX 4070 SUPER would perform nearly identically, given the 0.1-0.2% differences in CPU benchmarks. This implies that the rank is more dependent on the GPU than the CPU, as the RTX 4070 SUPER’s performance is the primary driver of frame rates in Overpower.

Settings Recommendations

For players targeting 60 FPS with maximum visual fidelity, the 4K Ultra setting delivers 86 FPS, which is well above the target and provides a smooth experience. This is the recommended setting for 4K displays, as it offers the best image quality without compromising frame rate stability.

For 1440p displays, the Medium setting provides 131 FPS, which is ideal for high-refresh-rate monitors (120Hz or 144Hz). This setting offers a 30% performance increase over Ultra (101 FPS) while maintaining a high level of visual quality. Players with 144Hz displays should prioritize Medium settings to fully utilize their monitor’s refresh rate.

For 1080p, the Low setting delivers 235 FPS, which is suitable for the fastest gaming monitors (240Hz). However, the High setting at 137 FPS is also a viable option for players with 144Hz displays, offering a significant visual improvement over Low while still exceeding the refresh rate target.

The data shows that the Medium setting at each resolution provides the best balance between performance and visual quality. At 4K, Medium offers 112 FPS, which is 30% faster than Ultra (86 FPS) but only 37% slower than Low (178 FPS). This makes Medium the optimal choice for players who want a high frame rate without sacrificing too much graphical detail.

For players who prioritize frame rate above all else, the Low setting at 1440p (210 FPS) is a strong recommendation, as it offers 53% more performance than Medium (131 FPS) while still providing a sharper image than 1080p. This is particularly relevant for competitive players who value responsiveness over visual fidelity.

Measured FPS Breakdown

At 1920x1080, the system delivers the following average frame rates: Low settings produce 235 FPS, Medium produces 147 FPS (with a min of 125 FPS and max of 169 FPS), High produces 137 FPS, and Ultra produces 113 FPS. The Medium setting shows a 44 FPS range between min and max, indicating some frame pacing variance, but the average remains well above typical refresh rate targets.

At 2560x1440, the performance scales down accordingly: Low settings deliver 210 FPS, Medium delivers 131 FPS (with a min of 111 FPS and max of 151 FPS), High delivers 122 FPS, and Ultra delivers 101 FPS. The Medium setting at 1440p shows a 40 FPS range, which is slightly tighter than at 1080p, suggesting the GPU is becoming more of a limiting factor.

At 3840x2160, the frame rates are the lowest but still highly playable: Low settings produce 178 FPS, Medium produces 112 FPS (with a min of 95 FPS and max of 128 FPS), High produces 103 FPS, and Ultra produces 86 FPS. The Medium setting at 4K shows a 33 FPS range, which is the tightest of all resolutions, indicating that the GPU is fully saturated and frame pacing is more consistent.

Across all resolutions, the Low setting provides the highest frame rates, with the 1080p result of 235 FPS being the absolute maximum. The Ultra setting provides the lowest frame rates, with the 4K result of 86 FPS being the minimum, but this still exceeds the 60 FPS standard for smooth gameplay. The Medium settings consistently provide a balance, with frame rates ranging from 112 FPS at 4K to 147 FPS at 1080p, making it the most versatile option for different display configurations.