Overpower

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 Ti combination delivers a high-refresh-rate experience in Overpower, with benchmark results indicating that the system scales predictably across resolutions and settings. The data shows a clear hierarchy where the GPU becomes the primary bottleneck at 4K, while the CPU’s six Zen 4 cores prove sufficient to maintain high frame rates at lower resolutions.

Resolution Scaling

The measured FPS data reveals a consistent pattern of performance degradation as resolution increases from 1920x1080 to 3840x2160. At 1080p with Low settings, the combo achieves 243 FPS, which drops by 6.6% to 227 FPS at 1440p, and then by a further 15% to 193 FPS at 4K. This scaling behavior indicates that at lower resolutions, the system is not fully GPU-bound, as the frame rate does not scale linearly with pixel count.

At Medium settings, the progression from 159 FPS at 1080p to 142 FPS at 1440p (a 10.7% drop) and then to 121 FPS at 4K (a 14.8% drop from 1440p) shows a similar trend. The High preset tells a more interesting story: 148 FPS at 1080p drops to 132 FPS at 1440p (10.8% decrease) and then to 112 FPS at 4K (15.2% decrease). The Ultra preset follows the same pattern, with 123 FPS at 1080p falling to 109 FPS at 1440p (11.4% drop) and then to 93 FPS at 4K (14.7% drop from 1440p).

The consistency of these percentage drops across all presets suggests that the scaling bottleneck is primarily the GPU’s pixel throughput. The RTX 5070 Ti’s 235.4 GPixel/s pixel rate and 686.6 GTexel/s texture rate become increasingly taxed as resolution rises. However, the fact that performance at 1080p does not exceed 243 FPS even at Low settings indicates that the CPU is still contributing to the overall frame time, preventing the system from reaching the absolute maximum potential of the GPU at lower resolutions.

CPU Role

The AMD Ryzen 5 7400F is a six-core, twelve-thread processor based on the Zen 4 architecture, running on the AMD Socket AM5 platform. Its base clock of 3.70 GHz and boost clock of 4.70 GHz provide the foundation for its performance. In Overpower, an action game, the CPU’s role is to feed the GPU with draw calls and physics calculations, and the data suggests it does so adequately.

Benchmark results for the CPU show strong single-thread performance, with a Cinebench R23 single-core score of 3072 and a Passmark single-thread score of 3689. These scores position the 7400F at the 83rd percentile among all CPUs, indicating that its single-core capabilities are well above average, which is crucial for game logic and frame pacing. The multi-core results are equally solid, with Cinebench R23 multi-core at 21765 and Passmark multithread at 25645, demonstrating that the six cores can handle background tasks without interfering with game performance.

The nearest rivals in the CPU benchmark database provide context for these scores. The Intel Core i5-14600T scores 32707 (0.1% higher), the Intel Core Ultra 7 155H scores 32697 (0.2% higher), the AMD Ryzen 7 PRO 6850H scores 32812 (0.2% lower), and the AMD Ryzen AI 7 PRO 360 scores 32662 (0.3% higher). These delta percentages are all within a fraction of a percent, meaning the 7400F performs essentially identically to these competitors in general CPU benchmarks, despite having fewer cores than some of them.

In the context of Overpower, the CPU’s 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth (DDR5, dual-channel) are likely sufficient for the game’s data demands. The fact that the system reaches 243 FPS at 1080p Low suggests that the CPU is not a limiting factor at that resolution, but the scaling to 193 FPS at 4K Low indicates that the GPU is taking over as the primary constraint.

FAQ

*Q: What is the maximum average FPS achievable with this combo in Overpower?*

A: The highest measured average FPS is 243, achieved at 1920x1080 resolution with Low settings.

Q: How does the Ultra preset compare to High at 4K?

A: At 3840x2160, the High preset yields an average of 112 FPS, while Ultra drops to 93 FPS, a decrease of 19 frames per second.

Q: Does the system maintain 60 FPS at all settings and resolutions?

A: Yes, the lowest measured average FPS is 93, which occurs at 4K Ultra, well above the 60 FPS threshold.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: At 2560x1440, Low settings produce 227 FPS on average, while Ultra produces 109 FPS, a difference of 118 FPS.

Q: Is the RTX 5070 Ti able to handle 4K gaming in this title?

A: Yes, the data shows that at 4K with High settings, the average FPS is 112, which is playable on high-refresh-rate displays, and even Ultra stays above 90 FPS.

Q: How does the combo rank among all tested systems for this game?

A: The combo ranks 260th out of 2980 tested combinations, placing it in the top 8.7% of all configurations.

How This Combo Ranks

The comboRankInGame field places this AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 Ti configuration at rank 260 out of 2980 total tested combinations. This ranking indicates that the system outperforms 91.3% of all other tested combos in Overpower, which is a strong result given the CPU’s modest core count and the GPU’s position in the market.

The GPU’s percentileVsAllGpus score of 86 places it in the top 14% of all graphics cards, while the CPU’s percentileVsAllCpus of 83 places it in the top 17% of all processors. When combined, these two components create a system that is well-balanced for this action title, with neither component dragging the other down significantly.

The ranking against the GPU’s nearest rivals shows that the RTX 5070 Ti is closely matched with the AMD Radeon RX Vega 64 (deltaPct -0.1%), Intel Arc A550M (deltaPct 0.4%), and AMD Radeon RX 6900 XT (deltaPct -2%). The RX 6900 XT is 2% faster in average benchmark score, but the RTX 5070 Ti still manages to achieve high frame rates in Overpower, suggesting that the game is well-optimized for the Blackwell architecture.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the most compelling balance between visual quality and performance. At 1080p, Medium delivers 159 FPS, which is 84 FPS higher than Ultra (123 FPS) but only 16 FPS lower than Low (243 FPS). The Medium preset also provides min/max data (135-183 FPS at 1080p), indicating stable frame delivery without significant drops.

At 1440p, Medium achieves 142 FPS with a min of 121 FPS and max of 163 FPS. This is 33 FPS higher than Ultra (109 FPS) and maintains a high enough minimum to avoid noticeable stutter on most displays. The 4K Medium setting at 121 FPS (min 103, max 139) is particularly notable, as it stays above 100 FPS even in the worst case, making it the highest preset that guarantees triple-digit performance at 4K.

For players with high-refresh-rate monitors (144Hz or above), the High preset at 1080p (148 FPS) or 1440p (132 FPS) is recommended, as it provides a meaningful visual upgrade over Medium while still exceeding the refresh rate of most displays. The Ultra preset, while delivering 123 FPS at 1080p and 109 FPS at 1440p, offers diminishing returns for the 10-15% FPS cost, and at 4K it drops to 93 FPS, which is still playable but leaves less headroom for demanding scenes.

Measured FPS Breakdown

The following data represents the exact measured average frame rates for each resolution and settings combination:

1920x1080:

• Low: 243 FPS average
• Medium: 159 FPS average (min 135, max 183)
• High: 148 FPS average
• Ultra: 123 FPS average

2560x1440:

• Low: 227 FPS average
• Medium: 142 FPS average (min 121, max 163)
• High: 132 FPS average
• Ultra: 109 FPS average

3840x2160:

• Low: 193 FPS average
• Medium: 121 FPS average (min 103, max 139)
• High: 112 FPS average
• Ultra: 93 FPS average

The Medium preset is the only one that provides min/max data across all three resolutions, showing that the frame pacing is consistent and that the system maintains at least 103 FPS at 4K and 121 FPS at 1440p during the measured period. The delta between average and minimum FPS is 18 frames at 1080p, 21 frames at 1440p, and 18 frames at 4K, indicating that the frame time variance does not increase with resolution, which is a positive sign for gameplay smoothness.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture using a 5 nm process at TSMC, with a chip size of 378 mm² containing 45,600 million transistors. Its 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of memory bandwidth, which is critical for high-resolution textures and effects in Overpower. The GPU’s base clock of 2295 MHz and boost clock of 2452 MHz, combined with 8960 shading units, deliver the raw compute power needed for the game’s action sequences.

The GPU’s benchmark scores reinforce its capability: a Passmark G3D score of 32974 and a Geekbench OpenCL score of 212363 place it at the 86th percentile among all GPUs. The 3DMark Steel Nomad DX12 score of 6604 indicates strong DirectX 12 performance, which aligns with the game’s modern rendering requirements. The GPU’s closest rivals in the database include the AMD Radeon RX 6900 XT (2% faster in average score) and the AMD Radeon RX 6800 XT (3.1% slower), showing that the RTX 5070 Ti sits in a competitive performance band.

In Overpower, the GPU’s role becomes increasingly dominant as resolution rises. The 4K Ultra result of 93 FPS, compared to the 1080p Ultra result of 123 FPS, represents a 24.4% performance drop, which is proportional to the 4.4x increase in pixel count (from 2.07 million to 8.29 million pixels). This near-linear scaling indicates that the GPU is the limiting factor at 4K, as the CPU is able to keep pace with the increased render load. The 16 GB of VRAM provides ample headroom for the game’s textures, and the 896.0 GB/s bandwidth ensures that asset streaming does not become a bottleneck, even at the highest settings.