Overpower

Overpower, an action title released in 2023, responds predictably to resolution scaling with this combination of an AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5070. The data shows a clear progression: at 1080p the system pushes an average of 194 FPS on Low settings, which drops to 186 FPS at 1440p and further to 171 FPS at 4K. This 23 FPS difference between 1080p and 4K on Low settings suggests that even at the lowest graphical preset, the GPU is not entirely free of resolution-based workload, though the relatively modest drop indicates the RTX 5070 handles the pixel throughput efficiently at this tier. The scaling pattern becomes more pronounced at higher settings, where the gap between 1080p and 4K widens significantly, pointing to the GPU as the primary limiting factor when visual fidelity increases.

At Medium settings, the measured frames per second show a tighter band across resolutions: 141 FPS at 1080p, 126 FPS at 1440p, and 107 FPS at 4K. This represents a 24% reduction from 1080p to 4K, which is a typical curve for a GPU-bound scenario. The High preset follows a similar trajectory, with 131 FPS at 1080p dropping to 117 FPS at 1440p and 99 FPS at 4K. The Ultra preset, which is the most demanding configuration in the measured data, shows 109 FPS at 1080p, 97 FPS at 1440p, and 82 FPS at 4K. The consistent pattern across all presets — where each step up in resolution costs roughly 10-15% of the frame rate — indicates that the Ryzen 5 5500X3D provides sufficient headroom to keep the RTX 5070 fed with data, as the frame rate drops are not sudden or erratic, which would suggest a CPU bottleneck at lower resolutions.

Resolution Scaling

The resolution scaling behavior of this combo reveals that the RTX 5070 is the dominant performance driver in Overpower. At 1080p Low, the system achieves 194 FPS, which is the highest measured value across all configurations. Moving to 1440p Low reduces this to 186 FPS, a decline of only 4.1%, while 4K Low yields 171 FPS, an additional 8% reduction. This mild scaling at Low settings implies that the CPU is not the limiting factor even at the lowest resolution, since the frame rate does not plateau or show signs of a processor ceiling. If the Ryzen 5 5500X3D were the bottleneck, we would expect to see similar frame rates across resolutions at Low settings, but the data shows a clear downward trend as pixel count increases.

The scaling becomes steeper at higher presets, which is characteristic of a GPU-intensive workload. At Ultra, the difference between 1080p and 4K is 27 FPS, or roughly 25% of the 1080p figure. This is a more pronounced drop than at Low, where the 4K value is only 12% lower than 1080p. The reason for this behavior is that Ultra settings increase the per-pixel cost substantially, making the GPU work harder for each frame regardless of resolution. The RTX 5070, with its 12 GB of GDDR7 memory and 192-bit bus, appears to be well-matched to this game’s demands, as the frame rates remain playable even at 4K Ultra with an average of 82 FPS. The data suggests that for players targeting high refresh rates at 1080p or 1440p, the GPU has ample headroom, while 4K gaming is viable but requires accepting lower settings to maintain higher frame rates.

How This Combo Ranks

In the broader context of tested hardware combinations, this pairing of the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5070 ranks 583 out of 2980 combos in Overpower. This places it in the top 20% of all tested configurations, which is a strong showing for a mid-range CPU paired with a current-generation GPU. The rank reflects the balanced nature of this setup: the Ryzen 5 5500X3D is not the most powerful processor on the market, but it provides enough single-thread and multi-thread performance to avoid holding back the RTX 5070 in most scenarios. The 583rd position out of nearly three thousand combos indicates that there are many systems with more expensive or newer components that perform better, but also a large majority that perform worse.

The CPU’s percentile ranking among all processors is 85, which means it outperforms 85% of tested CPUs in general benchmarks. Its nearest rivals in average benchmark score include the AMD Ryzen 5 5600F, which scores 36945 with a 0.2% delta, and the Intel Core Ultra 5 225, also at 36938 with a 0.2% delta. The Ryzen 5 5500X3D’s own average benchmark score is 37018, putting it slightly ahead of these competitors. This close grouping suggests that in CPU-bound scenarios, the differences between these processors would be minimal, but in Overpower, where the GPU is the primary bottleneck, the CPU’s exact score matters less than its ability to maintain consistent frame delivery. The GPU, meanwhile, ranks at the 82nd percentile among all GPUs, with an average benchmark score of 40377. Its nearest rival is the AMD Radeon Pro 580, which scores 40318 with a 0.1% delta, indicating that the RTX 5070 is positioned at a performance tier where small benchmark variations can shift rankings.

FAQ

Q: What is the highest average frame rate achievable with this combo in Overpower?

A: The highest measured average frame rate is 194 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 resolution with Ultra settings, the system delivers an average of 82 FPS, which is the lowest measured value across all configurations in the data.

Q: Is the CPU or GPU more likely to be the bottleneck in this game?

A: The data indicates the GPU is the limiting component, as frame rates scale consistently with resolution changes across all presets, with no signs of a CPU-imposed frame rate ceiling.

Q: What is the difference in performance between Medium and High settings at 1440p?

A: At 2560x1440, Medium settings yield an average of 126 FPS, while High settings yield 117 FPS, a difference of 9 FPS in favor of Medium.

Q: Does the Ryzen 5 5500X3D keep up with the RTX 5070 at 1080p?

A: Yes, the 1080p results show no evidence of a CPU bottleneck, as the frame rates vary significantly with resolution and settings, indicating the GPU is doing the heavy lifting.

Q: How does this combo rank compared to all tested configurations?

A: The combo ranks 583rd out of 2980 tested combinations in Overpower, placing it in the upper tier of performance.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this system’s capabilities across three resolutions and four settings presets. At 1920x1080, the lowest resolution tested, the combo achieves 194 FPS on Low, 141 FPS on Medium, 131 FPS on High, and 109 FPS on Ultra. The Medium preset at 1080p includes a minimum frame rate of 120 FPS and a maximum of 162 FPS, showing some variance but maintaining a solid floor. The gap between Low and Ultra at 1080p is 85 FPS, which is substantial and indicates that settings choices have a major impact on performance even at this resolution. For players with 144Hz monitors, the Ultra preset at 1080p would still be playable, but Medium or High would provide more headroom for frame rate fluctuations.

Moving to 2560x1440, the frame rates decrease as expected: 186 FPS on Low, 126 FPS on Medium, 117 FPS on High, and 97 FPS on Ultra. The Medium preset at 1440p shows a minimum of 107 FPS and a maximum of 145 FPS, which means that even in the most demanding moments, the system stays above the 100 FPS threshold. The High preset at 1440p, at 117 FPS average, is a strong option for competitive play, as it offers a good balance between visual quality and performance. The Ultra preset at 1440p drops below 100 FPS, which may be a consideration for players who prioritize frame rate over graphical fidelity.

At 3840x2160, the highest resolution tested, the results are 171 FPS on Low, 107 FPS on Medium, 99 FPS on High, and 82 FPS on Ultra. The Medium preset at 4K includes a minimum of 91 FPS and a maximum of 123 FPS, showing that the system can maintain playable frame rates at this resolution with moderate settings. The High preset at 4K is just below the 100 FPS mark, while Ultra dips to the low 80s, which might be acceptable for slower-paced action but could feel less responsive in fast combat scenarios. The data indicates that 4K gaming with this combo is feasible, but it requires a willingness to lower settings to maintain higher frame rates.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the player’s resolution and performance goals. At 1080p, the High preset delivers 131 FPS, which is well above the 60 FPS standard and provides a smooth experience for most action games. The Ultra preset at 1080p, at 109 FPS, is also viable and offers the best visual quality, but the 22 FPS drop from High to Ultra may not be worth the marginal visual improvements. For players with high refresh rate monitors (144Hz or 165Hz), the Medium preset at 141 FPS or Low at 194 FPS would be better choices, as they provide more headroom for frame rate spikes and dips. The Medium preset at 1080p, with a minimum of 120 FPS, offers a good balance for competitive play.

At 1440p, the High preset at 117 FPS is the recommended choice for most players, as it provides a smooth experience while maintaining decent visual fidelity. The Medium preset at 126 FPS is slightly faster and may be preferable for those who prioritize performance, but the difference is relatively small. The Ultra preset at 1440p, at 97 FPS, is playable but sits below the 100 FPS threshold, which may result in occasional stutter in fast-paced scenes. For 4K gaming, the Medium preset at 107 FPS is the best option, as it keeps the frame rate above 100 FPS while offering reasonable visual quality. The High preset at 4K, at 99 FPS, is also acceptable, but the Ultra preset at 82 FPS is only recommended for players who prioritize visuals over performance and do not mind lower frame rates.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, and manufactured on a 7 nm process. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a TDP of 105 W. The processor features a large 96 MB shared L3 cache, which is a notable characteristic of the X3D series and helps in gaming workloads where data reuse is high. In Overpower, the CPU’s role appears to be secondary to the GPU, as the frame rate scaling with resolution is consistent and does not show the plateau that would indicate a CPU bottleneck. The PassMark single-thread score of 2941 and multi-thread score of 20363 suggest that the CPU has sufficient processing power for modern games, and its 85th percentile ranking among all CPUs supports this.

The nearest rivals to the Ryzen 5 5500X3D in average benchmark score are the AMD Ryzen 5 5600F (36945, +0.2% delta), the AMD Ryzen AI 7 PRO 450 (37093, -0.2% delta), and the Intel Core i9-12900T (37112, -0.3% delta). These scores are all within 0.3% of each other, indicating that the Ryzen 5 5500X3D is in a tightly contested performance bracket. In Overpower, the CPU’s 6 cores and 12 threads are adequate for the game’s action genre, which typically benefits from higher clock speeds and cache rather than extreme core counts. The 96 MB L3 cache likely helps in maintaining consistent frame times, as the data shows no severe frame rate drops in the measured presets, with the lowest minimum FPS recorded at 91 FPS for 4K Medium.

GPU Role

The NVIDIA GeForce RTX 5070 is the primary driver of performance in this combo, as evidenced by the resolution scaling patterns. It is based on the Blackwell 2.0 architecture, manufactured on a 5 nm process, and features 6144 shading units, 192 texture mapping units, and 80 raster output units. The GPU has a base clock of 2325 MHz and a boost clock of 2512 MHz, with 12 GB of GDDR7 memory on a 192-bit bus, providing a bandwidth of 672.0 GB/s. This memory configuration is well-suited for 1440p and 4K gaming, where higher resolutions demand more bandwidth and capacity. The RTX 5070’s PassMark G3D score of 29137 and GPU compute score of 15787 place it in the 82nd percentile among all GPUs, with an average benchmark score of 40377.

In Overpower, the GPU’s performance is consistent with its capabilities. The 1080p results show that the GPU can push well over 100 FPS even at Ultra settings, and the 4K results demonstrate that it can handle 4K at playable frame rates with reduced settings. The nearest rivals to the RTX 5070 in average benchmark score include the AMD Radeon Pro 580 (40318, +0.1% delta) and the AMD Radeon Pro 5300 (40870, -1.2% delta), which are professional-grade GPUs that perform similarly in synthetic benchmarks but may differ in gaming workloads. The RTX 5070’s 12 GB of VRAM is sufficient for Overpower at all tested resolutions and settings, as there is no indication of memory-related performance drops in the data. The GPU’s boost clock of 2512 MHz and 80 ROPs contribute to its ability to sustain high frame rates, particularly at lower resolutions where rasterization throughput is critical.